Nanostructured chitosan (CS) and a chitosan–Zn based (Zn–CS) complex have been synthesized and simultaneously deposited on cotton fabrics using ultrasound. SEM measurements revealed that the coating consists of nanoparticles (NPs) of ca. 40 nm in diameter, homogeneously dispersed along the yarns. XANES studies pointed out that the complex consisted of a less than 2.1 nm ZnO core to which the chitosan was bonded. Additionally, FTIR measurements indicated the in situ formation of a Zn–CS complex which is the only deposited material on the cotton surface. The antibacterial properties of the CS and Zn–CS coated textiles were tested against Gram positive and Gram negative bacteria species. More than two-fold increase of the antibacterial activity of Zn–CS NP coated textiles was detected as compared to the fabrics treated with the sonochemically synthesized CS NPs alone. The sonochemical technique appears to be a suitable method for producing organic NPs of soluble compounds, without loss of their intrinsic properties, i.e. the antimicrobial activity of chitosan. Moreover, hybrid nanoorganometallic particles were simultaneously synthesized and deposited on cotton sonochemically.

Magnetite nanoparticles with different surface coverages are of great interest for many applications due to their intrinsic magnetic properties, nanometer size, and definite surface morphology. Magnetite nanoparticles are widely used for different medical-biological applications while their usage in optics is not as widespread. In recent years, nanomagnetite suspensions, so-called magnetic ferrofluids, are applied in optics due to their magneto-optical properties. This review gives an overview of nanomagnetite synthesis and its properties. In addition, the preparation and application of magnetic nanofluids in optics, nanophotonics, and magnetic imaging are described.

The ability to scale-up the sonochemical coating of medical textiles with antibacterial nanoparticles is demonstrated in the current paper. A roll-to-roll pilot installation to coat textiles was built taking into consideration the requirements of the sonochemical process. A long-run experiment was conducted in which 2500 m of fabric were coated with antibacterial ZnO nanoparticles (NPs). The metal oxide NPs were deposited from an ethanol:water solution. In this continuous process a uniform concentration of coated NPs over the length/width of the fabric was achieved. The antibacterial efficiency of the sonochemically-coated textiles was validated in a hospital environment by a reduction in the occurrence of nosocomial infections. NP-coated bed sheets, patient gowns, pillow cover, and bed covers were used by 21 patients. For comparison 16 patients used regular textiles. The clinical data indicated the reduced occurrence of hospital-acquired infections when using the metal oxide NP-coated textiles. In order to reduce the cost of the coating process and considering safety issues during manufacturing, the solvent (ethanol:water) (9:1 v:v) used for the long-run experiment, was replaced by water. Although lesser amounts of ZnO NPs were deposited on the fabric in the water-based process the antibacterial activity of the textiles was preserved due to the smaller size of the particles.

Zinc oxide nanoparticles (ZnO NP's) are known for their excellent antibacterial properties. This paper describes a method for enhancing the stability and the antibacterial activity of ZnO NPs synthesized and embedded sonochemically on cotton fabrics, by pre-treating the fabric surface with cellulase enzyme. The enzymatic pre-treatment resulted in the deposition of smaller sized NPs with improved adhesion. The reduction in particle size brought about better antibacterial performance against several types of bacteria. The sonochemically produced ZnO coating withstood 10 laundry cycles at 92 °C retaining its antibacterial activity.