Socks, being a necessary item of clothing, must be comfortable and maintain their quality throughout their life. Since the applicability of modal fibers and microfibers, as well as yarns produced using unconventional processes, in sock knitting has been insufficiently researched, this paper evaluated three groups of medium sized socks knitted in a plain single jersey pattern produced with the highest percentage of ring, rotor and air-jet spun modal or micro modal yarns of the same linear density in full plating with different textured polyamide 6.6 yarns compared to conventional cotton socks. The sock quality was evaluated through an investigation of the physical properties, wear resistance and dimensional stability, as well as the water vapor absorption, air permeability and thermal resistance using the thermal foot model before and after five repeated washing and drying cycles, according to the proposed methodology. The results showed that the fiber fineness, the structure of the differently spun yarns and the sock plain knits, the polyamide content and the implementation of the pretreatment of the socks had an influence on the obtained results. The socks made from modal and micro modal yarns differed in their properties. Compared to cotton socks, they have better comfort properties, a generally better pilling resistance and, after pretreatment, a comparable abrasion resistance.
As an alternative to cotton, viscose and lyocell fibers are suitable for the production of knitted next-to-skin underwear. Despite the advantages of a more environmentally friendly production process and valuable properties, the consumption of lyocell fibers is significantly lower compared to viscose fibers. The applicability of viscose and lyocell fibers in the production of ribbed knits for underwear is insufficiently researched, as is the influence of unconventionally spun yarns on their wearing properties. This study, therefore, investigates the possibilities of using lyocell fibers in the production of novel knitwear with improved properties compared to viscose and conventional cotton knitwear and determines their wearing quality. In this context, two sets of circular 1 × 1 rib jersey fabrics were produced from three types of differently spun viscose and lyocell yarns. The quality of the dry relaxed and wet processed knitted fabrics was evaluated by determining their structure, absorbency, air permeability, and dimensional stability, as well as their tensile, abrasion, and pilling properties, all in comparison to cotton knitted fabric produced under the same conditions. The results showed that lyocell rib knits have better structural uniformity, tensile properties, dimensional stability, air permeability, lower abrasion resistance, and comparable moisture absorbency and pilling propensity compared to viscose knits.
Although the applicability of modal fibers and microfibers for the production of lingerie knitwear is confirmed by commercial use, their share in the total consumption of man-made cellulosic fibers is very low. Their applicability in the fabrication of one-by-one rib weft-knitted fabrics, as well as comparative analyses of the influence of differently spun modal and modal-micro yarns on physical, usage, esthetic and wearing comfort properties have not been sufficiently investigated. In this study, a comparative analysis of innovative rib knitted fabrics made of regular–fine modal fibers (1.3 dtex) and 1.0 dtex microfibers is therefore carried out to determine their properties at different relaxation stages. For this purpose, two lines of one-by-one rib fabrics were fabricated from ring-, air-jet- and open-end rotor-spun modal and modal-micro yarns in the same way. The results showed that rib lingerie fabrics fabricated from modal microfibers are lighter and thinner, have a higher voluminosity and moisture absorption capacity, and consequently have slightly lower porosity, breathability and abrasion resistance than fabrics made from modal regular–fine fibers, as well as comparable dimensional stability, tensile strength and pilling properties, but mainly after a wet relaxation treatment.
Most casual socks are produced from cotton and are usually combined with synthetic fibers. The suitability of viscose and lyocell fibers for knitting socks needs to be investigated further. Therefore, three series of plain socks were produced, composed in the largest content from single-spun viscose or lyocell yarns fully plated with texturized polyamide 6.6 multifilament yarn. The quality of three types of main yarns manufactured by ring, open-end rotor, and air-jet spinning processes and two types of polyamide plating yarns used in the production of socks were assessed together with the structural, usage, and comfort quality of the socks before and after simulating household laundering. In comparison with cotton socks produced from ring-spun yarns under the same conditions, the results showed that viscose and lyocell socks have better moisture absorption and breathability, comparable dimensional stability, and lower abrasion resistance; lyocell socks have lower thermal resistance; and viscose socks are less prone to surface pilling after wet pretreatment.
During use, the surface of textile fabrics is prone to wear, which can cause changes such as pilling. Pilling (entanglement of fibers) is primarily assessed using the standard visual method EN ISO 12945-4:2020, but it can also be quantitatively measured by instrumental methods with image analysis software. Due to non-uniform digital imaging conditions, such as variations in magnification and analyzed surface area, the assessed area is often inconsistent. As a result, the total percentage of the fabric specimen surface area covered with pills is often omitted. To ensure uniform digital imaging, an innovative apparatus was designed and constructed in this research and applied to woven fabrics made from 100% cotton, wool, viscose, polyamide 6.6, polyester, and acrylic fiber. Pilling in the fabric specimens was induced by rubbing with the Martindale pilling tester (EN ISO 12945-2:2020) using two different abradant materials, through predefined pilling rubs ranging from 125 to 30,000. Pilling assessment was conducted using both the visual method and the improved instrumental method, following established grading classes based on the total percentage of the fabric specimen surface area covered with pills. The research results highlight the importance of uniform digital imaging and digital grading, as these demonstrate the high comparability of pilling grades assigned by the standard visual method while providing better distinction between consecutive grades.
The occurrence of pilling affects the appearance and aesthetic properties of knitwear and leads to a shortened lifespan of underwear, which is usually worn directly on the skin and under the outer layers of clothing and is exposed to direct contact with various textile materials in a dynamic microclimate. The interdependence of surface-induced pilling and electrical resistance (i.e., conductivity), which also affects wearing comfort, has not been sufficiently investigated. This paper therefore analyzes how surface-induced pilling of different intensities affects the surface resistivity and vertical resistance, physical properties and moisture content of double jersey cotton knitwear under different relative humidity conditions (25%, 40%, 65% and 80%) using Pearson’s correlation coefficient and coefficient of determination. Pilling was induced using the modified Martindale method and two types of abrasives, with higher intensity and larger pills obtained with a rougher wool reference abrasive. It was found that the surface resistivity and vertical resistance of cotton knitwear increased after prolonged wear due to surface-induced pilling and that mass, thickness and moisture content were not directly related to changes in electrical resistivity. The results of the Pearson correlation analysis showed a strong and quantifiable correlation between the intensity of surface pilling and surface resistivity at relative humidity up to 65%, despite their high moisture absorption. This statistically confirms that the occurrence of pilling reduces the electrical conductivity of cotton knitwear, resulting in a lower wearing comfort of cotton-based underwear. This finding can be useful in the development of underwear with high durability and comfort.