Limbal Stem Cell Deficiency (LSCD) is a very serious and painful disease that often results in impaired vision. Cultivation of limbal stem cells for clinical application is usually performed on carriers such as amniotic membrane or surgical fibrin gel. Transplantation of these grafts is associated with the risk of local postoperative infection that can destroy the graft and devoid therapeutic benefit. For this reason, electrospun scaffolds are good alternatives, as proven to mimic the natural cells surroundings, while their fabrication technique is versatile with regard to polymer functionalization and scaffolds architecture. This study considers the development of poly(ε-caprolactone) (PCL) immune-compatible and biodegradable electrospun scaffolds, comprising cefuroxime (CF) or titanium dioxide (TiO2) active components, that provide both bactericidal activity against eye infections and support of limbal stem cells growth in vitro. The PCL/CF scaffolds were prepared by blend electrospinning, while functionalization with the TiO2 particles was performed by ultrasonic post-processing treatment. The fabricated scaffolds were evaluated in regard to their physical structure, wetting ability, static and dynamic mechanical behaviour, antimicrobial efficiency and drug release, through scanning electron microscopy, water contact angle measurement, tensile testing and dynamic mechanical analysis, antimicrobial tests and UV-Vis spectroscopy, respectively. Human limbal stem cells, isolated from surgical remains of human cadaveric cornea, were cultured on the PCL/CF and PCL/TiO2 scaffolds and further identified through immunocytochemistry in terms of cell type thus were stained against p63 marker for limbal stem cells, a nuclear transcription factor and cytokeratin 3 (CK3), a corneal epithelial differentiation marker. The electrospun PCL/CF and PCL/TiO2 successfully supported the adhesion, proliferation and differentiation of the cultivated limbal cells and provided the antimicrobial effect against Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans.
Socks, being a necessary item of clothing, must be comfortable and maintain their quality throughout their life. Since the applicability of modal fibers and microfibers, as well as yarns produced using unconventional processes, in sock knitting has been insufficiently researched, this paper evaluated three groups of medium sized socks knitted in a plain single jersey pattern produced with the highest percentage of ring, rotor and air-jet spun modal or micro modal yarns of the same linear density in full plating with different textured polyamide 6.6 yarns compared to conventional cotton socks. The sock quality was evaluated through an investigation of the physical properties, wear resistance and dimensional stability, as well as the water vapor absorption, air permeability and thermal resistance using the thermal foot model before and after five repeated washing and drying cycles, according to the proposed methodology. The results showed that the fiber fineness, the structure of the differently spun yarns and the sock plain knits, the polyamide content and the implementation of the pretreatment of the socks had an influence on the obtained results. The socks made from modal and micro modal yarns differed in their properties. Compared to cotton socks, they have better comfort properties, a generally better pilling resistance and, after pretreatment, a comparable abrasion resistance.
Since only few reported studies propose anti-vascular endothelial growth factor (anti-VEGF) delivery through electrospun scaffolds, this study greatly contributes to the potential prevention of patient’s vision loss, as it explores electrospun polycaprolactone (PCL) coated with anti-VEGF for the blockage of abnormal cornea vascularization. In terms of physicochemical properties, the biological component increased the PCL scaffold fiber diameter (by ~24%) and pore area (by ~82%), while ut slightly reduced its total porosity as the anti-VEGF solution filled the voids of the microfibrous structure. The addition of the anti-VEGF increased the scaffold stiffness almost three-fold at both strains of 5 and 10%, as well as its biodegradation rate (~36% after 60 days) with a sustained release profile after Day 4 of phosphate buffered saline incubation. In terms of scaffold application function, the PCL/Anti-VEGF scaffold proved to be more favorable for the adhesion of cultured limbal stem cells (LSCs); this was confirmed by the SEM images, where the cells showed flat and elongated conformations. Further support of the LSC growth and proliferation was confirmed by the identified p63 and CK3 markers after cell staining. These results demonstrate the advantageous effect of the surface-adsorbed anti-VEGF to stop vision loss and help damaged corneal tissue repair.
In the context of sustainable fashion, this paper presents research on the impact of property assessment methods of textile materials and pigment digital printing on the mechanical properties of fabrics and their 3D simulation in the development of digital prototypes for clothing design. Six woven fabrics, with and without a textile ink-jet print, were tested using a KES-FB measuring system and digitized using SEDDI Textura AI technology. The determined mechanical parameters were used for 3D draping simulations based on Cusick Drape Meter method, as well as for the simulation of frilly women’s skirt models. The research showed a good correlation between the draping of real fabric samples and their 3D simulations, particularly supporting the use of AI for fabric assessments due to its sustainability. The drape analysis, performed on the digital 3D prototypes of a frilly women’s skirt model in two different lengths, showed the influence of fabric ink-jet printing on the drape properties, which can be explained by some structural parameters and determined changes in mechanical parameters between unprinted and printed fabric samples. The results provide valuable insights for objective evaluation of clothing digital 3D prototypes, which is a very significant element in the production process from a sustainability point of view and is becoming increasingly prominent as a method for developing new clothing designs that is gradually replacing the traditional, less environmentally friendly approach of creating numerous physical test samples.
This paper presents research in the field of computer-aided 3D clothing design, focusing on an investigation of three methods for determining the mechanical properties of woven fabrics and their impact on 3D clothing simulations in the context of sustainable apparel development. Five mechanical parameters were analyzed: tensile elongation in the warp and weft directions, shear stiffness, bending stiffness, specific weight, and fabric thickness. These parameters were integrated into the CLO3D CAD software v.2025.0.408, using data obtained via the KES-FB system, the Fabric Kit protocol, and the AI-based tool, SEDDI Textura 2024. Simulations of women’s blouse and trousers were evaluated using dynamic tests and validated by real prototypes measured with the ARAMIS optical 3D system. Results show average differences between digital and real prototype deformation data up to 6% with an 8% standard deviation, confirming the high accuracy of 3D simulations based on the determined mechanical parameters of the real fabric sample. Notably, the AI-based method demonstrated excellent simulation results compared with real garments, highlighting its potential for accessible, sustainable, and scalable fabric digitization. Presented research is entirely in line with the current trends of digitization and sustainability in the textile industry. It contributes to the advancement of efficient digital prototyping workflows and emphasizes the importance of reliable mechanical characterization for predictive garment modeling.
As an alternative to cotton, viscose and lyocell fibers are suitable for the production of knitted next-to-skin underwear. Despite the advantages of a more environmentally friendly production process and valuable properties, the consumption of lyocell fibers is significantly lower compared to viscose fibers. The applicability of viscose and lyocell fibers in the production of ribbed knits for underwear is insufficiently researched, as is the influence of unconventionally spun yarns on their wearing properties. This study, therefore, investigates the possibilities of using lyocell fibers in the production of novel knitwear with improved properties compared to viscose and conventional cotton knitwear and determines their wearing quality. In this context, two sets of circular 1 × 1 rib jersey fabrics were produced from three types of differently spun viscose and lyocell yarns. The quality of the dry relaxed and wet processed knitted fabrics was evaluated by determining their structure, absorbency, air permeability, and dimensional stability, as well as their tensile, abrasion, and pilling properties, all in comparison to cotton knitted fabric produced under the same conditions. The results showed that lyocell rib knits have better structural uniformity, tensile properties, dimensional stability, air permeability, lower abrasion resistance, and comparable moisture absorbency and pilling propensity compared to viscose knits.