In this study, gelatin and pullulan were successfully prepared as a novel type of protein–polysaccharide composite nanofibrous membrane by electrospinning at room temperature with deionized water as the solvent. The effects of gelatin content on the properties of the solution, as well as the morphology of the resultant nanofibers, were investigated. Scanning electron microscopy (SEM) was utilized to observe the surface morphology. Fourier transform infrared spectroscopy (FTIR) was used to study the interaction between gelatin and pullulan. Incorporation of pullulan with gelatin will improve the spinnability of the mixed aqueous solution due to lower surface tension. Moreover, the conductivity of the solution had a greater effect on the fiber diameters, and the as-spun fibers became thinner as the viscosity and the surface tension increased due to the addition of the polyelectrolyte gelatin. Gelatin and pullulan formed hydrogen bonds, and the intermolecular hydrogen bonds increased while the intramolecular hydrogen bond decreased, which resulted in better mechanical properties. The electrospun gelatin/pullulan nanofibers could mimic both the structure and the composition of the extracellular matrix, and thus could be applied in tissue engineering.

As a special engineering plastic, polyphenylene sulfide (PPS) can also be used to prepare membranes for membrane separation processes, adsorption, and catalytic and battery separators because of its unique properties, such as corrosion resistance, and chemical and thermal stability. Nowadays, many researchers have developed various types of PPS membranes, such as the PPS flat membrane, PPS microfiber membrane and PPS hollow fiber membrane, and have even achieved special functional modifications. In this review, the synthesis and modification of PPS resin, the formation of PPS membrane and the research progress of functional modification methods are systematically introduced, and the future perspective of PPS membrane is discussed.

Composite materials were prepared by the hot pressing method using poplar seed fibers and polycaprolactone (PCL) as the raw materials to solve the problems related to the recycling of waste fibers. The effects of mass fraction of poplar seed fibers, the volume density, and thickness on the sound absorption performance of the resulting composite materials were studied. The sound absorption coefficient curves of the composite material were obtained by the acoustic impedance transfer function method. The sound absorption coefficient of the composite material that was prepared under the optimal process conditions was higher than 0.7, and the effective sound absorption frequency band was wide. According to the box counting dimension method, which is based on the fractal theory, the fractal dimensions of the composite materials were calculated while using the Matlab program. The relationships between the fractal dimensions and the volume densities, mass fractions of poplar seed fibers, and thicknesses of the composite materials were also analyzed. Subsequently, the quantitative relationship between the fractal dimension and the sound absorption property parameters of the composite material was established in order to provide a theoretical basis for the design of the sound absorption composite material.

This study aimed to investigate the incorporation of rutin into electrospun pullulan and poly(vinyl alcohol) (PVA) nanofibers to obtain ultraviolet (UV)-resistant properties. The effect of weight ratios between pullulan and PVA, and the addition of rutin on the nanofibers’ morphology and diameters were studied and characterized by scanning electron microscopy (SEM). Fourier transform infrared (FTIR) analysis was utilized to investigate the interaction between pullulan and PVA, as well as with rutin. The results showed that the inclusion of PVA results in the increase in the fiber’s diameter. The addition of rutin had no obvious effect on the fibers’ average diameters when the content of rutin was less than 7.41%. FTIR results indicated that a hydrogen bond formed between pullulan and PVA, also between these polymers and rutin. Moreover, the addition of rutin could enhance the mechanical properties due to its stiff structure and could decrease the transmittance of UVA and UVB to be fewer than 5%; meanwhile, the value of ultraviolet protection factor (UPF) reached more than 40 and 50 when the content of rutin was 4.46% and 5.67%, respectively. Therefore, the electrospun pullulan/PVA/rutin nanofibrous mats showed excellent UV resistance and have potential applications in anti-ultraviolet packaging and dressing materials.

In order to realize high-efficiency and high-value recycling of waste hemp fibers, the macromolecular structure, the supramolecular structure, and the morphological structure of waste hemp fibers were investigated by using Fourier transform infrared spectroscopy, X-ray diffractometry, upright metallurgical microscopy, and scanning electron microscopy. According to its structural characteristics, the sound-absorbing mechanism of waste hemp fiber was analyzed, and the reason for the good sound-absorbing performance of waste hemp fiber was clarified. The acoustic impedance transfer function test was used to analyze and compare the sound-absorbing performance of waste hemp fiber and several other fiber aggregates that could be used in the field of sound-absorbing, and the sound-absorbing performance of a waste hemp fiber composite material was tested. The research revealed that: the sequence of sound-absorbing performance of several fiber aggregates was cotton fiber, waste hemp fiber, wool fiber, and polyester fiber; that waste hemp fiber had excellent high-frequency sound-absorbing performance, with a maximum sound absorption coefficient of 0.95; and that the maximum sound absorption coefficient of the waste hemp fiber composite reached 0.93. Therefore, the waste hemp fiber has excellent sound-absorbing properties and has high application value in the field of sound absorption.