In this work, microcrystalline cellulose (MCC) was isolated from jute sticks and sodium carboxymethyl cellulose (Na-CMC) was synthesized from the isolated MCC. Na-CMC is an anionic derivative of microcrystalline cellulose. The microcrystalline cellulose-based hydrogel (MCCH) and Na-CMC-based hydrogel (Na-CMCH) were prepared by using epichlorohydrin (ECH) as a crosslinker by a chemical crosslinking method. The isolated MCC, synthesized Na-CMC, and corresponding hydrogels were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electronic microscopy (SEM), and energy dispersive spectroscopy (EDS) for functional groups, crystallinity, surface morphology, and composite elemental composition, respectively. Pseudo-first-order, pseudo-second-order, and Elovich models were used to investigate the adsorption kinetics. The pseudo-second-order one is favorable for both hydrogels. Freundlich, Langmuir, and Temkin adsorption isotherm models were investigated. MCCH follows the Freundlich model (R2 = 0.9967), and Na-CMCH follows the Langmuir isotherm model (R2 = 0.9974). The methylene blue (MB) dye adsorption capacities of ionic (Na-CMCH) and nonionic (MCCH) hydrogels in different contact times (up to 600 min), initial concentrations (10-50 ppm), and temperatures (298-318 K) were investigated and compared. The maximum adsorption capacity of MCCH and Na-CMCH was 23.73 and 196.46 mg/g, respectively, and the removal efficiency of MB was determined to be 26.93% for MCCH and 58.73% for Na-CMCH. The Na-CMCH efficiently removed the MB from aqueous solutions as well as spiked industrial wastewater. The Na-CMCH also remarkably efficiently reduced priority metal ions from an industrial effluent. An effort has been made to utilize inexpensive, readily available, and environmentally friendly waste materials (jute sticks) to synthesize valuable adsorbent materials.
Piper chaba (locally known as “Choi Jhal”) is used traditionally as spices and folk medicine in different parts of Bangladesh. One of the most important bioactive compounds in this plant is piperine. In this study, the amount of piperine in P. chaba root and stem was investigated and the optimal solvent for piperine extraction at room temperature was also studied. High performance liquid chromatography (HPLC) was operated using a reverse phase column where methanol and water (70:30) were used as mobile phase. The detection was performed using photo diode array (PID) detector at a wavelength of 345 nm. The standard piperine showed linearity between 0.005 % and 0.04 % and the correlation co-efficient found for the linearity was 0.9933. The percentage of relative standard deviation (RSD) for both retention time and peak area were less than 2.0 %. The theoretical plate number (N) > 3000 and a tailing factor (T) < 1.5 were found in the acceptable range. The recovery percentage (%) of standard piperine was 99.16 %. Low value of co-efficient of variation and standard deviation are recognized for high precision of the method. The highest amount of piperine was found in root extracted with methanol (MR) amounting to 1.75 % in the root powder. The maximum amount of piperine in the stem was 1.59 % when extracted with methanol (MS). The piperine quantification in other extract like n-hexane root (HR), ethyl acetate root (ER), n-hexane stem (HS), ethyl acetate stem (ES) were 0.76 %, 1.69 %, 0.33 % and 1.46 % respectively. Methanol has given the highest yield of piperine compared to ethyl acetate and n-hexane for both root and stem. The developed method was simple, rapid, economic and validated in terms precision, accuracy and recovery. This selective method is found to be repeatable, accurate and successfully utilized for the Piper extract in marketed and pharmaceutical samples with well chromatographic conditions. The ethyl acetate extract of root and stem showed promising DPPH (1, 1-diphenyl-2-picrylhydrazyl) free radical scavenging activity with an IC50 value of 39.62 ± 0.95 μg/mL and 43.85 ± 1.50 μg/mL respectively. The study reports potential antibacterial activity and antifungal activity of P. chaba root and stem extracts. These outcomes revealed that different extracts of P. chaba may be used as natural preservatives.
The solution-processed and conductive MoO3–PEDOT:PSS (Mo–PPSS) composite layer in a MoO3/Au/MoO3–PEDOT:PSS (MoAu/Mo–PPSS) multilayer electrode in ITO-free organic solar cells (OSCs) was optimized in terms of electrical conductivity, interfacial contact quality, work function, and process wettability of the conductive composite thin film. The surface composition of the PEDOT:PSS film onto different electrodes was observed by using X-Ray Photoelectron Spectroscopy. The PEDOT:PSS-MoO3 composite protects the dissolution of individual MoO3 with PEDOT:PSS, which was confirmed by Auger Electron Spectroscopy. The UV-Visible spectroscopy showed that the photoactive layer of P3HT:PCBM absorbs in the wavelength range of 300–650 nm with the maximum absorption at 515 nm (2.40 eV). The device performance of 3.97% based on an MoAu/Mo–PPSS conductive composite electrode exhibited comparable enhancement and only 6% enhancement compared to an ITO-based electrode (3.91%). The enhancement of device efficiency was mainly due to relatively higher conductivity, a low work function of the conductive metal oxide-metal-metal oxide/polymer composite, and an enhancement of interfacial contact quality between the hole transport layer (HTL) and the mixed organic polymeric photoactive layer. These results indicate that the solution-processable Mo–PPSS conductive composite layer of the MoO3/Au multilayer electrode can replace the ITO-based electrode in the bulk of heterojunction organic photovoltaics (OPVs).
19 August 2024 in Asian Journal of Organic Chemistry
This study explores a novel synthetic approach for obtaining cis ‐ and trans ‐isomers of o‐hydroxychalcone derivatives and their metal‐sensing capabilities. Four chalcones (CH‐1 to CH‐4) were synthesized using an optimized Claisen–Schmidt condensation reaction. This method efficiently yielded the desired products by combining o‐hydroxyacetophenone with various substituted benzaldehydes in the presence of NaOH. The key innovation lies in the reaction conditions that enable the selective synthesis of both cis- and trans- isomers. Analysis of the allylic protons in CH-1 , CH-2 , and CH-3 using 1 H NMR revealed a coupling constant ( JHα ‐ JHβ ) of 15.60 Hz, confirming their trans configuration. Conversely, CH‐4 displayed a coupling constant of J = 8.40 Hz, indicating a cis configuration. Further structure optimization was performed using the B3LYP method with a DFT B3LYP/Lan2DZ level of theory. The metal‐sensing properties and selectivity of the synthesized chalcones were evaluated using UV‐Vis spectroscopy in an ethanolic solution containing various metal ions (Cu 2+ , Fe 3+ , Zn 2+ , K + , Mn 2+ , and Co 2+ ). Interestingly, CH-1 and CH-2 exhibited specific interactions with Cu 2+ ions. In contrast, CH-3 and CH-4 demonstrated the ability to sense both Cu 2+ and Fe 3+ , highlighting their potential for dual metal ion detection. This work presents a novel synthesis method for controlling cis-trans isomerism in o‐hydroxychalcones and unveils their promising uses in selective metal ion–sensing applications.
Several chalcones viz. 1,3-diaryl-2-propane-1-one (1a), 3-(4-hydroxy phenyl)-1-phenyl-2-propane-1- one (1b), 3-(4-amino-phenyl)-1-phenyl-2-propane-1-one (1c) and their derivatives 2-ethoxy-4,6- diphenyl-4H-pyran-3-carboxylic acid ethyl ester (2a), 4-(4-hydroxy-phenyl)-7,7-dimethyl-2-phenyl- 4,6,7,8-tetrahydro-chromen-5-one (2b) and 7-(4-amino-phenyl)-5-phenyl-1,5-dihydropyrano[2,3- d]pyrimidine-2,4-dione (2c ) have been synthesized following both conventional and microwave irradiation methods. The structures of the isolated compounds were elucidated on the basis of UV-visible, FTIR, 1H NMR spectral data. The antimicrobial results showed some remarkable facts about the structure–activity relationship, which states that the electronic atmosphere around the chalcone derivative moieties and substituents considerably affect the antimicrobial potential of the synthesized compounds. Theoretical calculation as well as antimicrobial activity of the compounds were also studied.