In this work, microcrystalline cellulose (MCC) was isolated from jute sticks and sodium carboxymethyl cellulose (Na-CMC) was synthesized from the isolated MCC. Na-CMC is an anionic derivative of microcrystalline cellulose. The microcrystalline cellulose-based hydrogel (MCCH) and Na-CMC-based hydrogel (Na-CMCH) were prepared by using epichlorohydrin (ECH) as a crosslinker by a chemical crosslinking method. The isolated MCC, synthesized Na-CMC, and corresponding hydrogels were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electronic microscopy (SEM), and energy dispersive spectroscopy (EDS) for functional groups, crystallinity, surface morphology, and composite elemental composition, respectively. Pseudo-first-order, pseudo-second-order, and Elovich models were used to investigate the adsorption kinetics. The pseudo-second-order one is favorable for both hydrogels. Freundlich, Langmuir, and Temkin adsorption isotherm models were investigated. MCCH follows the Freundlich model (R2 = 0.9967), and Na-CMCH follows the Langmuir isotherm model (R2 = 0.9974). The methylene blue (MB) dye adsorption capacities of ionic (Na-CMCH) and nonionic (MCCH) hydrogels in different contact times (up to 600 min), initial concentrations (10-50 ppm), and temperatures (298-318 K) were investigated and compared. The maximum adsorption capacity of MCCH and Na-CMCH was 23.73 and 196.46 mg/g, respectively, and the removal efficiency of MB was determined to be 26.93% for MCCH and 58.73% for Na-CMCH. The Na-CMCH efficiently removed the MB from aqueous solutions as well as spiked industrial wastewater. The Na-CMCH also remarkably efficiently reduced priority metal ions from an industrial effluent. An effort has been made to utilize inexpensive, readily available, and environmentally friendly waste materials (jute sticks) to synthesize valuable adsorbent materials.
The asymmetric stretching frequencies of the ketene group of the m,p-substituted phenylketenes were found to be correlated with σ. The substituent effects for the second-order rate constants of phenylketenes with various amines were not correlated linearly with any single substituent constants. The curved σ°-correlations with a plateau at a high reactivity region were observed for meta-substituents and p-chloro. The substituent effects including para-π-acceptors were described in terms of the Yukawa–Tsuno equation modified by a quadratic term as an approximation. The resultant ρ value decreases significantly from 2.92 for 2,2,2-trifluoroethylamine to 0.83 for benzylamine while an r− value increases from 0.50 to 1.10. The opposite change of ρ and r− with amines was interpreted by the dual electronic interactions between substituents and positive/negative charges at the zwitterionic transition structure. According to this interpretation, benzylamine with small ρ value and large r− value attributes to early transition state and larger ρ value with smaller r− value for 2,2,2-trifluoroethylamine attributes to late transition state.
3 February 2010 in Journal of Physical Organic Chemistry
Novel Schiff base of N-(2,6-dibenzylidenecyclohexylidene)-N′-(2,4-dinitrophenyl)hydrazine derivatives were synthesized by the condensation of 2,4-dinitrophenylhydrazine with substituted 2,6-dibenzylidenecyclohexanone. The synthesized compounds were characterized by UV-Visible, Fourier transform infrared, nuclear magnetic resonance and elemental analysis studies. Density functional theory was performed to predict structural geometries of compounds. The structures were optimized using B3LYP/6-311G+(2d,p) basis sets. The energies of HOMO and LUMO were found −6.23109 eV and −3.21595 eV for 4a, −5.77287 eV and −2.95528 eV for 4b, −5.28554 eV and −2.76835 eV for 4c respectively. These results revealed the possibility of intramolecular charge transfer during excitation of the molecules. Other quantum chemical parameters of compound were also calculated.
This study introduces a potentiometric pH sensor that is extremely sensitive and specifically designed for food and pharmaceutical applications. The sensor utilizes a pH-sensitive interface fabricated by electropolymerizing polyaniline (PANI) on carbon fiber cloth (CFC). Structural and morphological analyses of PANI-CFC and CFC have been conducted by using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and X-ray photoelectron spectroscopy (XPS). The investigation of the functional groups was conducted by using Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. The electrochemical characteristics were assessed by utilization of cyclic voltammetry (CV) and open-circuit potential (OCP) measurements in a three-electrode configuration. The sensor exhibited a sensitivity of 60.9 mV/pH, while retaining consistent performance within the pH range of 4 to 12. The repeatability and robustness of the sensors were verified. The accuracy of the PANI-CFC sensor was confirmed by validation using real samples, demonstrating its compatibility with commercially available pH sensors. The application of density functional theory (DFT) calculations revealed an interaction energy of -173.2886 kcal/mol, indicating a strong affinity of H+ ions towards PANI-CFC electrode. Further investigation was conducted to examine the chemical reactivity of PANI, revealing a HOMO-LUMO energy gap of -0.98 eV. This study highlights the PANI-CFC sensor as a reliable and efficient pH-sensing platform for food and pharmaceuticals applications, performing robustly in both laboratory and real-world settings.