Piezocatalysis has been regarded as a promising route for degrading organic pollutants in aqueous systems. Despite many successes in the lab, the practical application of piezocatalytic water treatment is greatly hindered by its strong reliance on ultrasonic waves, which necessitates dramatic energy input for operation. Piezocatalysis driven by the striking of low-frequency water flow has long been pursued. However, the stress provided by macroscopic water striking is ∼2 orders lower than ultrasonic cavitation, leading to far inferior piezocatalytic efficiency. Herein, textiles have been introduced as the substrates for piezocatalytic platforms. The highly curved, intertwined and mesoporous structure of textiles provides abundant stress concentration sites, which greatly amplified the striking force by ∼25.12 times at maximum, according to the mechanical simulation results. Besides, the high surface area and porosity of textiles accelerated the reactions and diffusion of reactants, which also favored piezocatalysis. A proof-of-concept piezocatalytic textile with molybdenum disulfide (MoS2) nanoflakes supported on a knitted fabric degraded 97.3% Rhodamine B (RhB) pollutant within 30 minutes with gentle vibration by an orbital shaker at 240 rpm, which is superior to the other state-of-the-art non-ultrasonic-driven piezocatalytic platforms. Getting rid of the reliance on ultrasonic waves, the piezocatalytic textile designed in this work greatly promotes the application of piezocatalysis in practical natural water treatment.
The outbreak of the Covid-19 pandemic has aroused tremendous attention toward personal protective equipment (PPE) in both scientific research and industrial manufacture. Despite decades of development in PPE design and fabrication, there's still much room for further optimization, in terms, of both protection performance and wear comfort. Interdisciplinary efforts have been devoted to this research field in recent years. Significantly, the innovation of materials, which brings about improved performance and versatile new functions for PPEs, has been widely adopted in PPE design. In this minireview, recent progress in the development of novel materials and structural designs for PPE application are presented in detail with the introduction of various material-based strategies for different PPE types, as well as the examples, which apply auxiliary components into face masks to enrich the functionalities and improve the personal feelings in the pandemic period.
Carbon nanotubes (CNTs) and graphene have commonly been applied as the sensitive layer of strain sensors. However, the buckling deformation of CNTs and the crack generation of graphene usually leads to an unsatisfactory strain sensing performance. In this work, we developed a universal strategy to prepare welded CNT–graphene hybrids with tunable compositions and a tunable bonding strength between components by the in situ reduction of CNT–graphene oxide (GO) hybrid by thermal annealing. The stiffness of the hybrid film could be tailored by both initial CNT/GO dosage and annealing temperature, through which its electromechanical behaviors could also be defined. The strain sensor based on the CNT–graphene hybrid could be applied to collect epidermal bio-signals by both capturing the faint skin deformation from wrist pulse and recording the large deformations from joint bending, which has great potential in health monitoring, motion sensing and human–machine interfacing.