Carbon nanotubes (CNTs) and graphene have commonly been applied as the sensitive layer of strain sensors. However, the buckling deformation of CNTs and the crack generation of graphene usually leads to an unsatisfactory strain sensing performance. In this work, we developed a universal strategy to prepare welded CNT–graphene hybrids with tunable compositions and a tunable bonding strength between components by the in situ reduction of CNT–graphene oxide (GO) hybrid by thermal annealing. The stiffness of the hybrid film could be tailored by both initial CNT/GO dosage and annealing temperature, through which its electromechanical behaviors could also be defined. The strain sensor based on the CNT–graphene hybrid could be applied to collect epidermal bio-signals by both capturing the faint skin deformation from wrist pulse and recording the large deformations from joint bending, which has great potential in health monitoring, motion sensing and human–machine interfacing.
Soil degradation threatens agricultural productivity and food supply, leading to hunger issues in some developing regions. To address this challenge, we developed a low-cost, highly efficient, and long-term stable soil improvement method. We chose polyvinyl alcohol (PVA), a commercially available polymer that is safe and non-degradable, to serve as a soil adhesive. We mixed PVA solution into the soil and applied a drying treatment to enhance the bonding between PVA and the soil, achieving highly water-stable soil. This PVA-stabilized soil exhibits low bulk density, high porosity, and high permeability, making it an ideal substrate for planting. In a germination test, the PVA-stabilized soil revealed a higher germination rate and growth rate compared to those of the non-treated soil. We believe this simple and efficient soil improvement method can restore degraded soil and contribute to sustainable agriculture.
A novel fingertip pulse sensor is developed based on an iontronic pressure sensor with high sensitivity and linearity over a wide range, which could be applied for assessing diverse cardiovascular status with high reliability.
The pronounced mismatch between polymeric electrodes and metallic components hinders the formation of robust electrical contacts. While most approaches rely on chemical design to strengthen interfacial interactions, we present a double‐sided mechanical interlocking strategy that provides both stability and adaptability. A conductive fabric scaffold bridges polymers and metals, with adhesives sequentially applied to both sides. The adhesive infiltrates and encapsulates scaffold fibers, forming a thread–hole adhesion that can only be disrupted by bulk failure. This mechanism achieves a record high interfacial toughness of 730 J m −2 between conductive elastomer and copper using commercial silver pastes. Peeling tests show delamination occurs between silver paste and copper, indicating even higher toughness could be obtained with better‐performing products of conductive adhesive. Notably, the interface stability surpasses that of the electrode itself, remaining intact even when the electrode fails. The design is broadly compatible with elastomeric or hydrogel matrices and with diverse commercial adhesives. It enables the construction of reliable epidermal electronics and hydrogel‐based devices. Overall, this interlocking strategy provides a versatile platform for integrating soft and rigid conductors in hybrid electronic systems.