Helicopter transient airborne electromagnetics (HTEM) has become a useful tool in mineral explorations and geological or environmental detection in recent decades. This article presents the frequency-domain 3-D full-wave inversion of the electromagnetic data recorded by a newly built HTEM system. In the forward process, the secondary magnetic field is calculated through the volume electric-field integral equation (EFIE). In the inversion process, the secondary field is first extracted from the total field measured by the HTEM system. Then the Born iterative method (BIM) is adopted to solve the nonlinear inverse scattering problem for the 3-D reconstruction of conductivity. It is first applied to the synthetic models to verify their effectiveness and accuracy. The effects of adjacent underground anomalies on the 3-D inversion performed in a local region within the long flight lines are studied and discussed. Then the BIM solver is used to invert for the underground anomalies using the field measured data recorded by the newly built HTEM system. The 2-D slices from the reconstruction are compared with the nomogram. It is found that the locations of the high-conductivity regions in the BIM results are consistent with locations of the peaks in the nomogram. The reconstructed profiles are also compared with the drilling data obtained near one flight line. The good agreement shows that the 3-D BIM inversion algorithm can be used to reconstruct the underground ore in HTEM surveys.
20 November 2024 in IEEE Transactions on Microwave Theory and Techniques
Energy-selective surfaces (ESSs) have attracted significant attention in electromagnetic (EM) compatibility and protection applications due to their nonlinear transmission capabilities in response to varying EM field intensities. This article proposes the design of a narrowband high-selectivity ESS for 5G wireless communications based on a dual-stopband equivalent circuit model (ECM). This ECM allows for the adjustment of bandwidth without affecting the resonant frequency of the operating band, achieved by directly controlling the resonant frequencies of the stopbands flanking the passband. Consequently, the stopbands can be brought closer together or moved further apart, indirectly adjusting the operating bandwidth. A physical model of a narrowband ESS operating at 3.5 GHz is presented based on the dual-stopband ECM. Both steady-and transient-state simulations demonstrate the efficacy of the design. The simulation results indicate that under low-power signals, the insertion loss (IL) at 3.5 GHz is 0.3 dB, and within the frequency range of 3.31–3.53 GHz, the IL remains below 1 dB. Under high-power conditions, the shielding effectiveness (SE) reaches up to 48 dB, with an SE greater than 20 dB in the range from 3.11 to 3.93 GHz. The fabricated ESS was measured in both rectangular waveguide and free-space environments, whose experimental results were in good agreement with simulation data at various power levels. These findings suggest that the proposed ESS offers significant potential for applications in EM shielding and compatibility, particularly in 5G communication systems.
Photonic crystal structures have attracted significant attention because of their ability to confine light, especially outgoing waves in a bandgap. In this study, we investigate a layer that can control the Smith–Purcell radiation. The results show that transmission characteristics and quality factor of a 1D photonic crystal can narrow the radiation spectrum and enhance the radiation intensity. From another perspective, the entire structure can be treated as a composite grating, the radiation spectra of which are obtained by theoretical calculations and agree with that from the analysis based on the role of the 1D photonic crystal. Therefore, it can be concluded that the radiation from a composited structure can be simplified by the radiation controlled by the 1D metal photonic crystal, and it provides a fast way to reshape the radiation spectra by designing the transmission characteristic and quality factor of the photonic crystal. Furthermore, a layer with special transmission characteristics and quality factor above a reflection grating can be used to achieve coherent and tunable Smith–Purcell radiation, which is significant for the development of band-controllable light or terahertz radiation sources.
18 May 2023 in IEEE Transactions on Antennas and Propagation
This work presents a novel discontinuous Galerkin time domain (DGTD) approach based on second-order bilinear z transform (BZT) to analyze the behavior of electromagnetic waves in a magnetized cold plasma. The Maxwell’s equations and current density equation are utilized to formulate the governing mathematical expressions of magnetized plasma, and the BZT approach is employed to construct the time domain iterative formula. The suggested technique outperforms existing methods in terms of stability, performance, and aliasing effect avoidance. The efficacy of the suggested BZT-DGTD approach is investigated by analyzing electromagnetic wave propagation in unmagnetized and magnetized cold plasmas, and a comprehensive comparison is performed with commercial software WCT and COMSOL to validate its practicality. Furthermore, the features of electromagnetic wave propagation in plasma are investigated under numerous circumstances, and these instances are compatible with plasma physics.
3 October 2024 in IEEE Transactions on Microwave Theory and Techniques
Combining the radiation characteristics of a subwavelength hole array (SHA) with the resonance characteristics of higher order mode resonant cavities, a method for designing multibeam higher order mode extended interaction oscillators (EIOs) based on the SHA narrowband Smith–Purcell (SP) characteristic radiation region has been proposed. For the validation of the feasibility of this design method, first, the feasibility of the higher order mode operation was verified by cold cavity characteristics, hot cavity particle-in-cell (PIC) simulation, and cold cavity experiment, respectively. Therefore, the law of the operating modes corresponding to peak characteristic impedance $R/Q$ has been confirmed, and the device has been confirmed to operate at higher order modes TM $_{n,1}$ -2 $\pi $ ( $n$$=$ 3, 5, 7, 9, and 11) modes stably and show the best resonance characteristic in its corresponding mode. Second, the feasibility of the multibeam design scheme was verified by a proposed $x$ -SHA $x$ -beam ( $x$ SHA $x$ B) higher order mode EIO, whose output power is more than $x$ ( $x$$=$ 2–6) times that of the 1SHA1B EIO. Consequently, this study offers a novel perspective on the design of interaction resonant cavities and provides an effective way for designing multibeam higher order mode EIOs, contributing to further improvement of output power.
12 April 2024 in IEEE Antennas and Wireless Propagation Letters
In this letter, a novel millimeter-wave (MMW) lens antenna (LA) using Moiré dielectric lenses (MDLs) based on the Moiré effect is proposed. The MDLs operate at 94 GHz , composed of two phase-complementary dielectric lenses. They facilitate different focal lengths of Fresnel lens phase distribution through the rotation of lenses, thereby enabling continuously adjusted focal lengths. The dielectric element, a simple rectangular dielectric post with a square hole, achieves a 360° linear transmission phase by altering the height of the pillars. Photocuring three-dimensional (3D) printing was used to illustrate the potential of lens antennas with constantly changeable focal lengths. Simulations demonstrate the reflection coefficient of the MDLs antenna in the W-band is below -20 dB. At 94 GHz, the focal length can be continuously adjusted from 46 mm to 186 mm. The measured results match the theoretical and predicted values rather well. According to the measured result, the power density can grow up to a maximum of 6 dB at the focus. The MDLs proposed in this letter have the advantages of simple design and low cost, offering new possibilities for further near-field focusing (NFF) antenna systems.