Inflatable space structures have many advantages such as small size, high reliability, and low cost. Aiming at a gravity-gradient boom for an XY-1 satellite, New Technology Verifying Satellite-1, a slender inflatable boom with low magnetic is presented. First of all, an inflatable boom with six self-supporting thin shells made of carbon and Vectran fiber composite materials on the inner wall was designed for eliminating a magnetic dipole moment and increasing structural stiffness. A precise stowage was designed for a tip mass surrounded by a pair of lightweight honeycomb blocks added on the top of the boom. The stowed boom was tested by sine sweep vibrations with three directions on the ground to verify the reasonable design. The XY-1 satellite which carried the inflatable boom was launched into low orbit. After being stowed state in space for at least 6 months, the inflatable boom orderly unfolded a 2.0 kg tip mass to 3.0 m away in May, 2013. The inflatable boom was successfully deployed from a series of photographs received on the satellite. The results show that this kind of lightweight inflatable boom with self-supporting thin shells can orderly unfold and fulfil the function of gravity-gradient in space for a long time.
19 December 2024 in Aerospace Science and Technology
The Inflatable Reentry and Descent Vehicle is a new kind of ballistic atmospheric entry vehicle which generates a piece of large aerodynamic drag area for deceleration when the resistance cone is deployed by gas-filling expansion. However, the aerothermal heating during planetary entry poses a significant challenge to a flexible fabric. In this paper, the para-aramid fabrics with three different sol–gel coatings (i.e. Al2O3 sol coating, supercritical drying Al2O3 aerogel coating, and atmospheric pressure drying Al2O3 xerogel coating) were proposed for heat resistance analysis and strength analysis. The thermal and mechanical properties of flexible fabric materials were conducted by infrared spectrum analysis, thermogravimetric analysis, scanning electron microscopy analysis, 50s ablation and uniaxial tension testing. All the results indicate that fabric coated with the supercritical drying Al2O3 aerogel possesses high heat resistance and nearly 100% residues strengthen.
The solar sails can be deployed by jointed truss or by inflated support tube. The deployed process and final deployed state of the solar sails is closely related to the design of the deployed mechanism. Therefore, the design of the deployed mechanism is very important for this new type of spacecraft. In this paper, we study the problem of the inflatable deployment of the solar sail; we utilized MSC.Patran to build the Z-folded and the Z+ curly-folded finite element models. LS-DYNA was used to simulate the dynamic characteristics of the above two solar sails under different conditions, and the results were analyzed. The results show that in the model that adopted the Z-folded method, the deployed process is relatively stable, and the effect of deployment is good, which is more suitable for practical application.