The incidence of hospitalizations due to cardiovascular (HACVD) and respiratory diseases (HARD) associated with PM10 was assessed with AirQ2.2.3. Daily PM10 data were used to this purpose. The results showed that 8.2% (95% CI: 5.6–11.4%), 7.2% (95% CI: 4.9–10.1%), and 4.4% (95% CI: 3.0–6.3%) of HACVD and 7.3% (95% CI: 4.5–10%), 6.4 (95% CI: 4.0–8.8%), and 3.9% (95% CI: 2.4–5.4%) of HACVD in the cities of Ahvaz, Khorramabad and Ilam were attributed to PM10, respectively. Governmental authorities need to act to control the dust hazard by spreading mulch and developing green space using vegetation amenable to the local climate.
1 April 2018 in Journal of Environmental Chemical Engineering
In this study, the removal of Eriochrome black T (EBT) from aqueous solutions was evaluated by cationic surfactant of hexadecyl trimethyl ammonium bromide (HDTMA)-modified montmorillonite clay (MC). The effects of contact time, pH, adsorbent dosage, EBT concentration, solution ion strength, and temperature were investigated on the EBT removal. HDTMA-MC was also examined by Fourier transformed infrared (FTIR) spectroscopy and X-ray diffractometer (XRD). The results illustrated that the experimental data were well followed by the pseudo-second-order kinetic and Freundlich isotherm models. The results also showed HDTMA-MC can be used as an effective adsorbent for the removal of EBT from aqueous solution.
26 January 2018 in International Journal of Chemical Reactor Engineering
In this study, the potential of hexadecyl trimethyl ammonium bromide modified montmorillonite (HDTMA-Mt) to remove the synthetic dyes Alizarin Red S (ARS) and Bromocresol Green (BCG) from aqueous media was assessed. The effect of different factors including surfactant loading rate onto the clay, contact time, pH, adsorbent dosage and dye concentrations, on the removal of ARS and BCG in batch systems were investigated. The adsorbent was characterized by means of scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffractometry (XRD). The equilibrium time for ARS and BCG was reached at 40 and 20 min, respectively, under optimized conditions (i.e. pH = 3, adsorbent dosage=1 g/L, surfactant loading rate onto the clay 70% of the cation exchange capacity (CEC) for ARS and 120% of the CEC for BCG, ARS concentration 50 mg/L and BCG concentration 500 mg/L). The adsorption rate of both dyes fitted the pseudo-second-order kinetic model and the equilibrium data was described by the Freundlich isotherm equation. The maximum monolayer adsorption capacities were equal to 666.6 and 1250 mg/g for ARS and BCG, respectively. Therefore, the HDTMA-Mt can be considered as an effective adsorbent for the removal of ARS and BCG from aqueous solutions.