This research investigates the application of plastic fiber reinforcement in pre-tensioned reinforced concrete railway sleepers, conducting an in-depth examination in both experimental and computational aspects. Utilizing 3-point bending tests and the GOM ARAMIS system for Digital Image Correlation, this study meticulously evaluates the structural responses and crack development in conventional and plastic fiber-reinforced sleepers under varying bending moments. Complementing these tests, the investigation employs ABAQUS’ advanced finite element modeling to enhance the analysis, ensuring precise calibration and validation of the numerical models. This dual approach comprehensively explains the mechanical behavior differences and stresses within the examined structures. The incorporation of plastic fibers not only demonstrates a significant improvement in mechanical strength and crack resistance but paves the way for advancements in railway sleeper technology. By shedding light on the enhanced durability and performance of reinforced concrete structures, this study makes a significant contribution to civil engineering materials science, highlighting the potential for innovative material applications in the construction industry.

Due to the large volume and mass of materials used, the construction industry is one of the sectors with the highest environmental impact. However, to provide good quality, affordable, and low-energy housing, the business case must be maintained. Accordingly, we aimed to develop and test a calculator to measure the ecological footprint of the embodied carbon in materials used in construction projects in a standardized way, without the need for environmental or even civil engineering expertise, and thus in a way that is accessible to SMEs. The novelty of our research is that although there are calculators for measuring the environmental impact (e.g., carbon footprint) of the construction industry, and there is a methodology for calculating the ecological footprint of construction, there is no free, easy-to-use, online calculator for calculating the ecological footprint of embodied carbon in materials available to all enterprises. In other words, this approach extends our previously developed corporate ecological footprint calculator with the environmental impacts of material usage. The study summarises the baseline research for an ecological footprint calculator, tested on two new condominium buildings and the energy renovation of five condominium buildings, built with a prefabricated technology typical in Hungary and other post-socialist countries. Based on our results and in accordance with former literature sources, most of the ecological footprint of new construction projects is determined by materials with high mass and volume, in particular, concrete, steel, and masonry; so it is not necessary to take into account all construction materials in a calculator in a detailed way. We also conclude that renovation and ongoing maintenance, as well as preservation, are recommended for structurally sound buildings, as embodied carbon in materials in the case of an energy upgrade of an existing condominium building has an environmental impact of 0.3–0.8 global hectares per dwelling, depending on the technical content, while in the construction of a new building, this value is between 10.49–14.22 global hectares. Our results can help investors and clients in their decisions, and policymakers in determining urban development directions.

The most important thing nowadays is to use available resources to develop infrastructure as efficiently as possible. In this regard, evaluating the deterioration of tramway tracks is critical from both a technical and an economic viewpoint. In Hungary, seven types of superstructure systems are currently differentiated in the case of tramway transport, but the geometrical deterioration, lifecycle, and lifecycle cost of the tramway tracks are not accurately known. The current study aimed to evaluate and compare the results of track geometry measurements of two different “open” tramway superstructure systems depending on their traffic load and age. The geometry measurements we re executed by TrackScan 4.01 instrument, developed and maintained by a Hungarian developer company called Metalelektro Méréstechnika Ltd. The evaluation of the measurements showed a clear relationship between the traffic load, age, and track deterioration. Based on the results, it can be generally stated, concerning “open” superstructure systems, that regardless of the “open” superstructure system or the level of traffic load, the average value of alignment is decreasing; however, the average value of the longitudinal level is increasing. Furthermore, the deterioration of an older ballasted track with lower traffic is similar to that of a younger ballasted track that has a higher traffic load. Another significant result was that the deterioration of the track gauge parameter in the case of concrete slab tracks is clearly described as the broadening of the track gauge.

In the 21st century, one of the key requirements is to develop and maintain our infrastructure facilities most efficiently using the available resources. Tramways are of significant national economic importance and represent an important national asset. There are currently seven different types of superstructure systems in Hungary, based on the national regulations and the related requirements currently in force. This paper compares the paved tramway superstructure systems in the context of track geometry, through-rolled axle tons of track, and the age of track sections. Paved tracks have many benefits, but the main ones are easier maintenance and road traffic use. Elastically supported continuous rail bedding (ESCRB; in Hungary, this is known as “RAFS”) and “large” slab superstructure systems are used to create paved superstructure systems. Road crossings use the latter systems, while heavily loaded lines use several ESCRB systems. This article examines the geometrical changes in several ESCRB superstructure systems. A TrackScan 4.01 instrument was used to take measurements in June and September 2021 and in April 2022, September 2022, and May 2023. Track gauge, alignment, and longitudinal level are examined. Regardless of the ESCRB superstructure system or age, a medium-loaded line’s track gauge trendline increases, which means that the track gauge is widening and, regardless of traffic load or age, the average longitudinal level is constantly increasing from year to year. When it is a medium-loaded line, the average value of alignment increases slightly, and the trendline is almost straight, but it decreases when it is an extremely heavily loaded line. The authors will analyze how the reference track section will change in the future. Based on the results, it is important to assess how subsequent measurements affect the trend lines. Because the data evaluations show similar results, comparing open tramway tracks to paved ones is crucial.

Bridges are special structures that provide a transport connection between areas divided by a physical barrier. Vehicles passing over bridges cause vibrations in the structural elements of the bridge, which can damage these structural elements over time. The aim of our research was to investigate the vibrations generated by vehicles on Hungary’s first steel girder welded bridge, which was subjected to the maximum allowable load. In this paper, we describe the measurements we have carried out, analyse the results, present the vehicle-bridge interaction model we have constructed and the computer simulation we have carried out by using it. Our research results are intended to contribute to accident prevention and the safe operation of bridges.