Wenjie Shen

Dr. Wenjie Shen

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
WSWenjie Shen
Wenjie Shen
SWSuofang Wang
Suofang Wang
XLXiaodi Liang
Xiaodi Liang
Impellers are utilized to increase pressure to ensure that a radial pre-swirl system can provide sufficient cooling airflow to the turbine blades. In the open literature, the pressurization mechanism of the impellers was investigated. However, the effect of impellers on the cooling performance of the radial pre-swirl system was not clear. To solve the aforementioned problem, tests were carried out to assess the temperature drop in a radial pre-swirl system with various impeller configurations (impeller lengths l/b ranging from 0 to 0.333). Furthermore, numerical simulations were used to investigate the flow and heat transfer characteristics of the radial pre-swirl system at high rotating Reynolds numbers. Theoretical and experimental investigations revealed that the pre-swirl jet and output power generate a significant temperature drop, but the impellers have no obvious effect on the system temperature drop. By increasing the swirl ratio, the impellers reduce the field synergy angle and thus improve convective heat transfer on the turbine disk. In addition, increasing the impeller length can reduce the volume-averaged field synergy angle and improve heat transfer, but the improvement effectiveness decreases as the impeller length increases. Thus, the study concluded that impellers could improve the cooling performance of the radial pre-swirl system by enhancing disk cooling.

8 June 2023 in Thermal Science and Engineering Progress
Verified
Journal Article
Closed access
WSWenjie Shen
Wenjie Shen
SWSuofang Wang
Suofang Wang
XHXiaoting Hou
Xiaoting Hou

21 August 2023 in Energies
Verified
Journal Article
Open access
PDF file
XLXiaodi Liang
Xiaodi Liang
SWSuofang Wang
Suofang Wang
WSWenjie Shen
Wenjie Shen
Complex oil and gas two-phase flow exists within an aero-engines bearing cavity scavenge pipe, prone to lubricated self-ignition and coking. Lubricant system designers must be able to accurately identify and understand the flow state of the scavenge pipe. The prediction accuracy of previous models is insufficient to meet the more demanding needs. This paper establishes a visualized flow pattern identification test system for the scavenge pipe, with a test temperature of up to 370 k, using a high-speed camera to photograph four flow patterns, decomposing the pressure signals obtained from high-frequency dynamic pressure sensors using the ensemble empirical mode decomposition (EEMD) method, and then performing Hilbert transform, using the Hilbert spectrum to quantify the changes of amplitude and frequency with time, and establishing the energy and flow pattern correspondence analysis. Then the energy percentage of IMFs is used as the input of feature values, and the random forest algorithm machine learning is used for predictive classification. The experimental results show that the flow pattern recognition rate established in this paper can reach 98%, which can identify the two-phase flow pattern in the scavenge pipe more objectively and accurately.

2 July 2024 in Case Studies in Thermal Engineering
Verified
Journal Article
Open access
WSWenjie Shen
Wenjie Shen
SWSuofang Wang
Suofang Wang
FHFangyang Huang
Fangyang Huang
MWMengyuan Wang
Mengyuan Wang

17 September 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
YGYueteng Guo
Yueteng Guo
SWSuofang Wang
Suofang Wang
WSWenjie Shen
Wenjie Shen
Enhancing thermal efficiency and minimizing weight are prevailing issues in aero engines. Owing to its hollow structure, the twin-web turbine disc exhibits remarkable weight reduction properties, while its enhanced cooling constitutes a novel challenge. In this study, a twin-web turbine disc cavity system is numerically investigated. To enhance the cooling effect and minimize pressure loss, a multi-objective genetic algorithm and Kriging surrogate model are employed to optimize the radial height of the pre-swirl nozzle and receiver hole in the disc cavity system. The results indicate that the overall performance of Opt-3, derived from the Technique for Order Preference by Similarity to the Ideal Solution method within the Pareto frontier, is superior. This configuration achieves a uniform low distribution of rotor temperatures while maintaining moderate pressure losses. Notably, the maximum temperature is reduced by 21.1 K compared to the basic model, with pressure losses remaining largely unchanged. Additionally, an increase in the flow ratio leads to a reduction in both the maximum temperature and average temperature of the back web while simultaneously increasing the temperature of the front web and augmenting pressure losses. However, it is important to note that the degree of variation in these parameters diminishes with increasing flow ratios.

30 August 2024 in Energies
Verified
Journal Article
Open access
PDF file
YGYueteng Guo
Yueteng Guo
SWSuofang Wang
Suofang Wang
WSWenjie Shen
Wenjie Shen
Twin-web turbine discs have been the subject of research recently in an effort to lighten weight and boost aeroengine efficiency. In the past, the cooling design of turbine discs was generally constrained to optimizing a single structural parameter, which hindered the enhancement of the optimization impact. Therefore, this article proposes a twin-web turbine disc system with a high radius pre-swirl. Driven by the database produced through the numerical simulation, a backpropagation network surrogate model is constructed, and the angles of the pre-swirl nozzles and receiver holes are optimized by a genetic algorithm to enhance the cooling efficiency of the turbine disc. Evaluation was based on the highest disc temperature, disc temperature uniformity, and Nusselt number. The results demonstrate that the suggested surrogate model effectively optimizes the structural characteristics of the twin-web turbine disc by aiming for the specified cooling performance indexes. The cooling effect of the turbine disc is significantly improved in different operating environments. Specifically, the optimized model produces the largest temperature drop in the disc rim temperature. Both axial and radial temperature uniformity have led to a notable enhancement. The alteration in coolant flow within the cavity results in a notable decrease in the area with low heat transfer efficiency and a substantial increase in the Nusselt number.