Wind farm control using dynamic concepts is a research topic that is receiving an increasing amount of interest. The main concept of this approach is that dynamic variations of the wind turbine control settings lead to higher wake turbulence, and subsequently faster wake recovery due to increased mixing. As a result, downstream turbines experience higher wind speeds, thus increasing their energy capture. In dynamic induction control (DIC), the magnitude of the thrust force of an upstream turbine is varied. Although very effective, this approach also leads to increased power and thrust variations, negatively impacting energy quality and fatigue loading. In this paper, a novel approach for the dynamic control of wind turbines in a wind farm is proposed: using individual pitch control, the fixed‐frame tilt and yaw moments on the turbine are varied, thus dynamically manipulating the wake. This strategy is named the helix approach because the resulting wake has a helical shape. Large eddy simulations of a two‐turbine wind farm show that this approach leads to enhanced wake mixing with minimal power and thrust variations.
With the trend of increasing wind turbine rotor diameters, the mitigation of blade fatigue loadings is of special interest to extend the turbine lifetime. Fatigue load reductions can be partly accomplished using individual pitch control (IPC) facilitated by the so‐called multiblade coordinate (MBC) transformation. This operation transforms and decouples the blade load signals in a yaw‐axis and tilt‐axis. However, in practical scenarios, the resulting transformed system still shows coupling between the axes, posing a need for more advanced multiple input multiple output (MIMO) control architectures. This paper presents a novel analysis and design framework for decoupling of the nonrotating axes by the inclusion of an azimuth offset in the reverse MBC transformation, enabling the application of simple single‐input single‐output (SISO) controllers. A thorough analysis is given by including the azimuth offset in a frequency‐domain representation. The result is evaluated on simplified blade models, as well as linearizations obtained from the NREL 5–MW reference wind turbine. A sensitivity and decoupling assessment justify the application of decentralized SISO control loops for IPC. Furthermore, closed‐loop high‐fidelity simulations show beneficial effects on pitch actuation and blade fatigue load reductions.
The combined wind speed estimator and tip-speed ratio (WSE–TSR) tracking wind turbine control scheme has seen recent and increased traction from the wind industry. The modern control scheme provides a flexible trade-off between power and load objectives. On the other hand, the Kω2 controller is often used based on its simplicity and steady-state optimality and is taken as a baseline here. This paper investigates the potential benefits of the WSE–TSR tracking controller compared to the baseline by analysis through a frequency-domain framework and by optimal calibration through a systematic procedure. A multi-objective optimisation problem is formulated for calibration with the conflicting objectives of power maximisation and torque fluctuation minimisation. The optimisation problem is solved by approximating the Pareto front based on the set of optimal solutions found by an explorative search. The Pareto fronts were obtained by mid-fidelity simulations with the National Renewable Energy Laboratory (NREL) 5 MW turbine under turbulent wind conditions for calibration of the baseline and for increasing fidelities of the WSE–TSR tracking controller. Optimisation results show that the WSE–TSR tracking controller does not provide further benefits in energy capture compared to the baseline Kω2 controller. There is, however, a trade-off in torque control variance and power capture with control bandwidth. By lowering the bandwidth at the expense of generated power of 2 %, the torque actuation effort reduces by 80 % with respect to the optimal calibration corresponding to the highest control bandwidth.
With the ever increasing power rates of wind turbines, more advanced control techniques are needed to facilitate tall towers that are low in weight and cost‐effective but in effect more flexible. Such soft‐soft tower configurations generally have their fundamental side‐side frequency in the below‐rated operational domain. Because the turbine rotor practically has or develops a mass imbalance over time, a periodic and rotor‐speed dependent side‐side excitation is present during below‐rated operation. Persistent operation at the coinciding tower and rotational frequency degrades the expected structural life span. To reduce this effect, earlier work has shown the effectiveness of active tower damping control strategies using collective pitch control. A more passive approach is frequency skipping by inclusion of speed exclusion zones, which avoids prolonged operation near the critical frequency. However, neither of the methods incorporates a convenient way of performing a trade‐off between energy maximization and fatigue load minimization. Therefore, this paper introduces a quasi‐linear parameter varying model predictive control (qLPV‐MPC) scheme, exploiting the beneficial (convex) properties of a qLPV system description. The qLPV model is obtained by a demodulation transformation and is subsequently augmented with a simple wind turbine model. Results show the effectiveness of the algorithm in synthetic and realistic simulations using the NREL 5‐MW reference wind turbine in high‐fidelity simulation code. Prolonged rotor speed operation at the tower side‐side natural frequency is prevented, whereas when the trade‐off is in favor of energy production, the algorithm decides to rapidly pass over the natural frequency to attain higher rotor speeds and power productions.
Individual pitch control (IPC) is a method to mitigate periodic blade loads in wind turbines, and it is typically implemented using the multi-blade coordinate (MBC) transform, which converts the blade load measurements from a rotating frame into the non-rotating tilt axis and yaw axis. Previous studies have shown that by including an additional tuning parameter in the MBC, the azimuth offset reduces the coupling between non-rotating axes, allowing for higher performance levels for diagonal controller structures. In these studies, the decentralized control of IPC was composed of two identical integral controllers. This work analyzes and compares the improvement that the azimuth offset can provide in different adaptive gain scheduling IPCs where the diagonal controllers can have integral or proportional action with different gains. They are applied to a 15 MW wind turbine simulated with OpenFAST v3.5 software. The controller parameter tuning is addressed as an optimization that reduces blade fatigue load based on the damage equivalent load (DEL) and is resolved through genetic algorithms. Simulations show that only using different controller gains in IPC does not provide significant improvements; however, including azimuth offset in the optimal IPC schemes with integral controllers allows for the greatest DEL reduction with a lower actuator effort.
Direct data-driven control has attracted substantial interest since it enables optimization-based control without the need for a parametric model. This paper presents a new Instrumental Variable (IV) approach to Data-enabled Predictive Control (DeePC) that results in favorable noise mitigation properties, and demonstrates the direct equivalence between DeePC and Subspace Predictive Control (SPC). The methodology relies on the derivation of the characteristic equation in DeePC along the lines of subspace identification algorithms. A particular choice of IVs is presented that is uncorrelated with future noise, but at the same time highly correlated with the data matrix. A simulation study demonstrates the improved performance of the proposed algorithm in the presence of process and measurement noise.