Theobroma cacao L. species, cultivated worldwide for its valuable beans, generates up to 72% weight of the fruit as waste. The lack of reutilization technologies in the cocoa agroindustry has hindered the exploitation of valuable bio-components applicable to the generation of high value added bioproducts. One such bioproduct is microfibrillated cellulose (MFC), a biopolymer that stands out for its desirable mechanical properties and biocompatibility in biomedical, packing, 3D printing, and construction applications. In this study, we isolated microfibrillated cellulose (MFC) from cocoa pod husk (CPH) via oxalic acid hydrolysis combined with a steam explosion. MFC isolation started with the Solid/Liquid extraction via Soxhlet, followed by mild citric acid hydrolysis, diluted alkaline hydrolysis, and bleaching pre-treatments. A Response Surface Methodology (RSM) was used to optimize the hydrolysis reaction at levels between 110 and 125 °C, 30–90 min at 5–10% (w/v) oxalic acid concentration. The cellulose-rich fraction was characterized by Fourier-Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD), and Scanning Electron Microscopy (SEM) analyses. Characterization analyses revealed a cellulose-rich polymer with fibers ranging from 6 to 10 μm, a maximum thermal degradation temperature of 350 °C, and a crystallinity index of 63.4% (peak height method) and 29.0% (amorphous subtraction method). The optimized hydrolysis conditions were 125 °C, 30 min, at 5% w/v oxalic acid: with a 75.7% yield. These results compare with MFC obtained through highly concentrated inorganic acid hydrolysis from different biomass sources. Thus, we show a reliable and greener alternative chemical treatment for the obtention of MFC.

We focus on the selective hydrogenation using NiPd/(xCeO₂-)Al₂O₃catalysts under liquid and gas conditions.

In the Ecuadorian Amazonia, there is a concern about the presence of high concentrations of cadmium (Cd) in rivers and sediments because of changes in land use and anthropogenic activities, e.g., mining and oil exploitation. Hence, the research related to water treatment processes to meet environmental standards has gained relevance. The use of biochar (BC) as adsorbent is considered a promising and low-cost alternative to improve the water quality in developing countries. In this work, lignocellulosic wastes from Guadua angustifolia were transformed through thermochemical treatments, into a promising carbonaceous material, such as BC. BC samples were prepared by pyrolysis (termed pyrochar, PC) and hydrothermal carbonization (termed hydrochar, HC). Their physicochemical properties were correlated with the Cd adsorption removal performance, analyzing the effect of adsorbent dosage, initial solution pH, adsorption kinetics and adsorption isotherms. HC showed the highest Cd adsorption performance, due to the presence of a higher number of oxygenated functional groups, as confirmed by FTIR, XPS and Raman spectroscopy. This research has proposed a sustainable alternative for the recovery of an available waste, contributing to mitigate the effects of the presence of metals on the health and economy of the most vulnerable sectors of society.