The increasing demand for high energy density fuels and the concern for their safety have propelled research in the field of gelled propellants, where understanding the combustion of single gelled fuel droplets is the first stage to predict the spray combustion characteristics. The experiments utilized single-isolated freely falling gelled unsymmetrical dimethylhydrazine (UDMH) droplets instead of the conventional suspended droplet approach, in order to eliminate the perturbation associated with the suspension mechanism. Morphological transformations of the gelled droplet involved in the combustion processes were monitored by employing a high-speed digital camera, while the effects of ambient pressure and oxygen concentration on burning rate constants were also studied. The experimental results show that four main phenomena (droplet deformation, bubble formation and growth, vapor jetting and luminous jetting flame with “horn” shape) and three distinct phases were identified in the droplet combustion process; the high yield stress and polymer chain structure of polymer gellant are responsible for the appearance of bubbles with almost the same order of magnitude as the droplets. Increasing the ambient pressure can increase the burning rate, postpone the appearance of microexplosions, and weaken microexplosion intensity; while increasing the ambient oxygen concentration can promote the appearance of microexplosions, strengthen microexplosion intensity and increase the burning rate.
Binary collision of droplets is a fundamental form of droplet interaction in the spraying flow field. In order to reveal the central collision mechanism of two gel droplets with equal diameters, an axi-symmetric form of the Navier-Stokes equations are firstly solved and the method of VOF (volume of fluid) is utilized to track the evolution of the gas-liquid free interface. Then, the numerical computation model is validated with Qian’s experimental results on Newtonian liquids. Phenomena of rebound, coalescence and reflexive separation of droplets after collision are investigated, and structures of the complicated flow fields during the collision process are also analyzed in detail. Results show that the maximum shear rate will appear at the point where the flow is redirected and accelerated. Rebound of droplets is determined by the Weber number and viscosity of the fluid together. It can be concluded that the gel droplets are easier to rebound in comparison with the base fluid droplets. The results also show that the alternant appearance along with the deformation of droplets in the radial and axial direction is the main characteristic of the droplet coalescence process, and the deformation amplitude attenuates gradually. Moreover, the reflexive separation process of droplets can be divided into three distinctive stages including the radial expansion, the recovery of the spherical shape, and the axial extension and reflexive separation. The variation trend of the kinetic energy is opposite to that of the surface energy. The maximum deformation of droplets appears in the radial expansion stage; in the case of a low Weber number, the minimum central thickness of a droplet appears later than its maximum deformation, however, this result is on the contrary in the case of a high Weber number.
Connected-Element Interferometry (CEI) is a technique for measuring the phase delay of difference of Time Of Arrival (TOA) of a downlink radio signal to two antennae on a short baseline. This technique can use an atomic clock for time-frequency transmission and achieve intermediate accuracy angular tracking. Owing to the relatively short length of the baseline, the passive reception mode, and near real-time operation, CEI can be used to continuously monitor the orbit variations of both cooperative and non-cooperative satellites. In this paper, a small-scale CEI system of two orthogonal baselines (75 m × 35 m) is investigated to track a Geostationary Earth Orbit (GEO) Television (TV) satellite at 110·5°E. The phases are extracted from correlation results. The results show that the Root Mean Square (RMS) of the phase fitting residuals, if not calibrated, is within 2° at night and up to 10° in the daytime. After applying the calibration signal, the RMS of the phase fitting residuals in the daytime decreases to the same level at night. Comparing the phase delay with the a priori phase delay using Two-Line-Element (TLE) data, the integer ambiguity is successfully resolved. Finally, a batch algorithm is used to estimate the orbit of the GEO satellite, and the orbit determination accuracy is evaluated using the precise orbits provided by the China National Time Service Centre (NTSC). The results show that the accuracies in the radial direction and the cross-track direction are less than 1 km, and the Three-Dimensional (3D) position accuracy reaches the 2 km order of magnitude.
The official launch of the Chinese BeiDou Navigation Satellite System with global coverage (BDS-3) presents significant opportunities for various applications, including precision agriculture and autonomous driving, among others. With its global spatial coverage and hybrid space constellation comprising geosynchronous Earth orbit (GEO), inclined geosynchronous orbit (IGSO), and medium Earth orbit (MEO) satellites, BDS can significantly contribute to various GNSS remote sensing applications that require real-time, precise water surface height measurements with high temporal and spatial resolution, such as in tidal monitoring. In this paper, we propose a carrier-phase-based method for BDS Reflectometry (BDS-R) to precisely retrieve real-time water surface height. Firstly, the BDS-R altimetry method is introduced, along with a detailed explanation of the data processing procedures. Secondly, a quality control method tailored to the characteristics of low-cost BDS devices is developed. Thirdly, a land altimetry experiment is conducted to evaluate the precision of BDS-R and analyze the specific contribution of the BDS hybrid constellation. Finally, a water surface altimetry experiment validates the real-time monitoring capabilities for low-cost BDS-R. The results indicate that low-cost BDS-R can achieve real-time centimeter-level water level monitoring with a temporal resolution of 1 s in lakefront environments. The performance of BDS-R can be significantly improved by the BDS hybrid constellation, particularly IGSOs. It is concluded that low-cost BDS-R has great potential for promoting ground-based GNSS remote sensing applications.