Nigeria is a nation endowed with both abundant renewable and non-renewable energy resources. Despite its vast potential, Nigeria struggles with a consistent power supply due to various systemic issues, such as inadequate funding, infrastructural decay, corruption, technical skill shortages, and macroeconomic instability. These challenges hinder the effective harnessing and distribution of energy resources, particularly renewable ones like wind, solar, biomass, and hydropower. This study assesses the existing energy policies and their efficacy in promoting sustainable energy development towards achieving universal electricity access by 2030. It highlights the necessity for a just energy transition that integrates a substantial proportion of renewable energy into the national grid, aiming to meet up to 60% of the country’s energy demands with clean sources by 2050. This transition is critical not only for energy security and reducing the environmental impact but also for fostering socioeconomic equity. Recommendations include overhauling the legal and regulatory frameworks to support renewable energy growth, particularly in off-grid areas, to ensure clean, affordable, and secure energy access. Strategic investments, enhanced infrastructure, and robust public–private partnerships are essential to overcome the current barriers and realize Nigeria’s energy potential. This paper calls for a comprehensive approach that addresses both the technical and socioeconomic dimensions of the energy crisis, laying the groundwork for a sustainable and prosperous energy future for Nigeria.

This paper presents a feasibility analysis of the technical, environmental, and economic sustainability of an existing mini-grid technology system in Nigeria. The study investigates the cost and other operational parameters of the Gbamu-Gbamu solar–battery–diesel hybrid mini-grid, specifically the 85 kWp solar PV installation in the Ijebu East Local Government area of Ogun state. Situated within the Owo forest in South-West Nigeria, the mini-grid aims to reduce the effects of global warming and promote sustainable technological development in rural communities by increasing energy access through renewable sources. To assess the system’s viability, this research utilized RETScreen Expert software to validate the techno-economic and environmental sustainability of the installed mini-grid solar–PV–battery–diesel system in the region. Climatic data for the study were obtained from the National Aeronautics and Space Administration (NASA). The results demonstrate that the system is economically feasible and environmentally viable, as indicated by the positive net present value (NPV) and an average monthly irradiance of 4.78 kW/h/m². Furthermore, the system achieved a 92.9% reduction in GHG emissions, provided a reasonable payback period of four years, and enabled a yearly electricity export of 203 MWh. These findings highlight the system’s potential to enhance energy access and mitigate climate change.

This paper presents the technical and economic analysis of a solar–wind electricity generation system to meet the power requirements of a rural community (Okorobo-Ile Town in Rivers State, Nigeria) using the Renewable—energy and Energy—efficiency Technology Screening (RETScreen) software. The entire load estimation of the region was classified into high class, middle class, and lower class. Two annual electricity export rates were considered: 0.1 USD/KWh and 0.2 USD/KWh. The results from the proposed energy model comprising a 600 kW PV system and a 50 kW wind system showed that with a USD 870,000 initial cost and USD 9600 O&M cost, the annual value of the electricity generated was 902 MWh. The simple payback was 5.1 years with a net present value of USD 3,409,532 when 0.2 USD/KWh was used as the annual export rate instead of 10.8 years for simple payback and an NPV of USD 1,173,766 when 0.1 USD/KWh was used. Thus, there is a potential to install a wind–solar system with average weather conditions of 4.27 kWh/m²/d for the solar irradiance and 3.2 m/s for the wind speed at a 10 m hub height using a rate of 0.2 USD/KWh as the electricity export rate.

The escalating pace of migration and urbanization in Nepal has triggered profound alterations in land use practices. This event has resulted in a considerable diminution of ecological diversity and a substantial decline in the potential for carbon sequestration and other ecosystem services, thereby impeding climate change mitigation efforts. To address this, a comprehensive assessment of land use change and carbon storage was conducted from 2000 to 2019 and forecasted to 2050 in Nepal. Employing the Markov chain and InVEST models, this study evaluated the loss and gain of carbon, elucidating its economic value and spatial distribution. The findings revealed that carbon storage in 2000 and 2019 were 1.237 and 1.271 billion tons, respectively, with a projected increase to 1.347 million tons by 2050. Carbon sequestration between 2000 and 2019 amounted to 34.141 million tons, which is anticipated to surge to 76.07 million tons from 2019 to 2050, translating to economic valuations of 110.909 and 378.645 million USD, respectively. Forests emerged as pivotal in carbon storage, exhibiting higher carbon pooling than other land use types, expanding from 37% to 42% of the total land area from 2000 to the predicted year 2050. Notably, carbon distribution was concentrated in parts of the terai and mountain regions, alongside significant portions of the hilly terrain. The findings from this study offer valuable insights for governing Nepal and REDD+ in developing and implementing forest management policies. The results emphasize the importance of providing incentives to local communities judiciously to promote effective conservation measures.

Liquid products obtained by the fast pyrolysis process applied to biomass can be used as chemical raw materials and liquid fuels. In this study, tea bush, walnut shell, and pine cone samples selected as biomass samples were obtained from Trabzon and Rize provinces in the Eastern Black Sea Region and used. When considered in terms of our region, the available biomass waste samples are easy to access and have a high potential in quantity. To employ them in the experimental investigation, these biomass samples were first ground, sieved to a particle size of 1.0 mm, and mixed. A fast pyrolysis process was applied to this obtained biomass mixture in a fixed-bed pyrolysis reactor. The effects of temperature, heating rate, and nitrogen flow rate on the product yields of the fast pyrolysis technique used on the biomass mixture are examined. A constant particle size of 1.0 mm, temperatures of 300, 400, 500, 600, and 750 °C, heating rates of 100, 250, 400, and 600 °C.min⁻¹, and flow rates of 50, 100, 200, and 300 cm³.min⁻¹ were used in tests on fast pyrolysis. The studies showed the 500 °C pyrolysis temperature, 100 °C min⁻¹ heating rate, and 50 cm³.min⁻¹ nitrogen flow rate gave the maximum liquid product yield. The liquid product generated under the most compelling circumstances is analyzed to determine moisture, calorific value, fixed carbon, ash, raw coke, and volatile matter. Additionally, the crude bio-oil heating value, measured at 5900 cal/g and produced under the most favorable pyrolysis circumstances, rose by around 40% compared to its starting material. The liquid product obtained from rapid pyrolysis experiments can be used as liquid fuel. The evaluation of the potential of chemical raw materials can be a subject of research in a different discipline since there are many chemical raw materials (glycerine, furfurals, cellulose and derivatives, carbonaceous materials, and so forth) in fast pyrolysis liquids.