This work highlights how the treatment of ZSM-5 (parent Zeolite Socony Mobil–5, Si/Al = 23) with different surfactant templates and alkaline solution, improved the catalytic performance in the Friedel-Crafts acylation of anisole with a propionic anhydride to obtain p-methoxypropiophenone. The modified microporous to mesoporous zeolite catalysts were characterized using different analytical techniques, including X-ray diffraction (XRD), nitrogen porosimetry, Fourier-transform infrared spectroscopy (FT-IR), temperature-programmed desorption (ammonia-TPD) and field emission scanning electron microscopy (FE-SEM) to analyze the crystallographic structure, surface acidity, surface area, porosity, morphology, and particle size. The results showed that the formed mesoporous zeolite by NaOH solution had smaller mesopores (ca. 3.7 nm) as compared to the mesoporous zeolites obtained by surfactant templates, such as, CTAB (ca. 14.9 nm), TPAOH (ca. 11.1 nm) and mixture of CTAB/TPAOH (ca. 15.2 nm). The catalytic acylation reaction was conducted in a batch glass reactor at various temperatures and the products were analyzed using off-line gas chromatography–mass spectrometry (GC-MS). It was found that the activity of treated ZSM-5 with mixed surfactant templates (CTAB/TPAOH) exhibited enhanced selectivity towards the main product (p-methoxypropiophenone) by a factor 1.7 or higher than unmodified ZSM-5 due to its increased surface area by 1.5 times and enhanced acid sites.

The volatile oils hydrodistilled from the aerial parts and roots of O. carduchorum C.C Towns. (Fabaceae) have been chemically characterized for the first time. A total of 43 constituents with an abundance >0.03% were identified and quantified in the two oils by GC/MS and GC/FID analyses. They comprise 38 components (98.58%) of the oil isolated from the aerial parts (OCA) and 34 components (93.33%) of the oil from the roots (OCR). Six constituents, α-pinene (23.11 ± 0.1%), β-elemene (17.33 ± 0.1%), 1,8-cineole (12.15 ± 0.2%), furfural (7.91 ± 0.1%), terpineol-4-ol (6.32 ± 0.2%), and limonene (4.13 ± 0.1%), accounted for about 75% of the total OCA oil. On the other hand, 1,8-cineole (15.79 ± 0.1%), furfural (10.44 ± 0.1%), β-elemene (10.14 ± 0.2%), α-terpineol (7.74 ± 0.1%), linalool (7.45 ± 0.1%), and α-pinene (4.76 ± 0.1%) made up about 60% of the OCR oil. The IC₅₀ values of the scavenging activities of the OCA and OCR oils towards the DPPH radical and H₂O₂ were 79.8 ± 0.5 and 153.3 ± 0.6 μg/mL and 394.09 ± 0.2 and 311.67 ± 0.4 μg/mL, respectively. In addition, in the MTS assay, the OCA and OCR oils showed significant antiproliferative effects against T47D, MDA-MB-453, BG-1, and A549 human cancer cells that were more powerful than those against two normal human cell lines, HEK-293 and HFF-1. The abundant presence of β-elemene as an antiproliferative component of the two oils suggested the existence of a new chemotype of O. carduchorum.

The adsorption of lead (Pb II) ion on different types of synthesized zeolite was investigated. The BET surface area, total pore volume & average pore size distribution of these synthesized zeolites were determined by adsorption isotherms for N2, the surface area & total pore volume of their sources were found by adsorption isothermN2.The adsorption equilibrium was measured after 24h at room temperature (RT) & concentration 10mg.L-1 of Pb (II) was used. The adsorption of heavy metal Pb (II) on four different prepared zeolites (LTA from Montmorillonite clay, FAU(Y)-B.H (G2) from Barley husk, Mordenite (G1) from Chert rock, FAU(X)-S.C (G3) from shale clay & modified Shale clay by oxalic acid (N1) & sodium hydroxide (N2)), were compared with the adsorption of their sources by using static batch experimental method. The major factors affecting the heavy metal ion sorption on different synthesized zeolites & their sources were investigated. The adsorption equilibrium capacity (Qm) of Pb (II) ion for different synthesized zeolites ordered from (N1>N2>LTA>G3>G2>G1&for their sources ordered Shale clay >Montmorilonite> Barley husk>Chert rock. The atomic absorption spectrometry was used for analysis of lead heavy metal ion, the obtained results in this study showed that the different synthesized zeolites were efficient ion exchanges for removing heavy metal, in particular, the modified zeolite from shale clay by oxalic acid.

In this work a cheap and an affordable natural quartz powder was used as a silica source, converted to a sodium silicate solution, for synthesising the low silica kind X (LSX) with process of hydrothermal the zeolite LSX with the formula Na73K22[Si97Al95O384] . 212H2O. The synthesized zeolite with the types cations of K and Na, considered as NaK-LSX, the best time to complete crystallization was 3.0 h, was features of the agent performing Fourier transforms infrared spectroscopy (FT-IR) and X-ray diffraction (XRD), that affirmed the synthesis effectiveness. Images of field emission scanning electron microscope (FE-SEM) in the (NaK-LSX) illustrated particles of multi-faceted spherulite composing polycrystal particles that have various measures as well as particles of small amorphous. Measuring of the average pore size and, volume of total pore for sample utilizing the “Barrett-Joyner-Halenda (BJH)”technique, the particle magnitude spread over an area of NaK-LSX about 67nm, and nitrogen adsorption is indicating an area of surface about 732.29 m2/g applying “Brunauer-Emmett-Teller (BET)” technique. The synthesizes zeolite (LSX) may have different kind of usages including, industrial applications as a gas or vapour adsorption, separation and as a catalyst. In addition they may also be used as a selective adsorbent in purifying polluted air.