A low-order panel method is used to predict the performance of ducted propellers. A full wake alignment (FWA) scheme, originally developed to determine the location of the force-free trailing wake of open propellers, is improved and extended to determine the location of the force-free trailing wakes of both the propeller blades and the duct, including the interaction with each other. The present method is applied on a ducted propeller with sharp trailing edge duct, and the predicted results over a wide range of advance ratios, with or without full alignment of the duct wake, are compared with each other, as well as with results from RANS simulations and with measurements from an experiment.
The panel method does not apply to hydrofoils, propellers and ducts with blunt trailing edges due to the flow separation downstream. In this paper, a model is proposed to represent the flow separation with an extension, and a low-order panel method coupled with a boundary layer solver is used. The criteria of zero lift and zero moment are adopted to determine the end of the extension zone, and flow separation criteria are used to determine the starting points on either side of the section. The model is applied to hydrofoil, bare duct and ducted propeller sections with blunt trailing edges. The pressure distributions and skin frictions along the hydrofoils and ducts correlate well with those from the Reynolds-averaged Navier–Stokes method. The thrust and torque of the propeller agree much better with experimental measurements when the extension is determined from this model rather than choosing random locations. This model requires much less computational effort while preserving high accuracy, and thus can be used reliably in designing and analysing hydrofoils and propeller ducts with blunt trailing edges.