Ocean Engineering Group, The University of Texas at Austin, ECJ 8.610 Civil, Architectural and Environmental Engineering Department-EWRE, 301 E Dean Keeton St. Stop C1786, Austin, TX 78712-1173, USA
Dr. Spyros A. Kinnas
Ocean Engineering Group, The University of Texas at Austin, ECJ 8.610 Civil, Architectural and Environmental Engineering Department-EWRE, 301 E Dean Keeton St. Stop C1786, Austin, TX 78712-1173, USA
Unsteady sheet cavitation is very common on marine propulsor blades. The authors summarize a lifting‐surface and a surface‐panel model to solve for the unsteady cavitating flow around a propeller that is subject to nonaxisymmetric inflow. The time‐dependent extent and thickness of the cavity were determined by using an iterative method. The cavity detachment was determined by applying the smooth detachment criterion in an iterative manner. A nonzeroradius developed vortex cavity model was utilized at the tip of the blade, and the trailing wake geometry was determined using a fully unsteady wake‐alignment process. Comparisons of predictions by the two models and measurements from several experiments are given.
A low-order panel method is used to predict the performance of ducted propellers. A full wake alignment (FWA) scheme, originally developed to determine the location of the force-free trailing wake of open propellers, is improved and extended to determine the location of the force-free trailing wakes of both the propeller blades and the duct, including the interaction with each other. The present method is applied on a ducted propeller with sharp trailing edge duct, and the predicted results over a wide range of advance ratios, with or without full alignment of the duct wake, are compared with each other, as well as with results from RANS simulations and with measurements from an experiment.
7 August 2012 in International Journal of Rotating Machinery
A boundary element method (BEM) and a vortex-lattice method (VLM) are extended in order to predict the unsteady performance of propellers subject to rigid body motions. The methods are applied in the case of prescribed surge and heave motions, and the results are compared with those from other methods.