A novel method for bearing damage detection is introduced in this paper. In conventionally operated bearings, when a bearing component is damaged, precise frequency response features are available for associating with the damaged components. In some applications such as in wind turbines, the speed of the shaft is very low, and the frequency contents of the damage‐induced impulsive response are low as well. Therefore, those damage‐induced vibration responses are mixed up with gearbox operational responses and hence unable to be separated with simple band‐pass or high‐pass filters. Hence, it is difficult to obtain the expected results by directly applying the traditional bearing fault diagnosis analysis methods, such as the acceleration enveloping analysis. The method proposed in this paper is to use a synthesized synchronous averaging method, which converts the bearing response from the physical shaft cycle domain into a virtual shaft cycle domain. The bearing damage feature response is generally not synchronized with the physical shaft, but in the synthesized virtual shaft, the bearing damage feature response becomes synchronous, while the signals originally synchronized with the physical shaft become nonsynchronous. Therefore, the synchronous averaging can be applied to enhance the signal‐to‐noise ratio of the bearing damage signature. Once the signal has been cleaned up in the virtual shaft cycle domain, it is then converted back into the physical shaft cycle domain for further analysis. Both numerical simulations and a wind turbine field example have been used to demonstrate the procedure and verify the feasibility for the proposed method.
26 June 2023 in Mechanical Systems and Signal Processing
Synchronous analysis is one of the most effective and practical techniques in rotating machinery diagnostics, especially in cases with variable speed operations. A modern analog-to-digital convertor (ADC) usually digitizes an analog signal to an equal time interval data series. Synchronous resampling converts the data series from an equal time interval data series to an equal shaft rotation angle interval data series. This conversion is usually achieved in the digital domain with the aid of shaft speed information, through either direct measurement or identification from a measured vibration signal, which is a time-consuming process. In order to improve the computational efficiency as well as the data processing accuracy, in this paper, a fast synchronous time-point calculation method based on an inverse function interpolation procedure is proposed. By identifying the inverse function of the instantaneous phase with respect to time, the calculation process of synchronous time points is optimized, which results in improved calculation efficiency and accuracy. These advantages are demonstrated by numerical simulations as well as experimental verifications. The numerical simulation results show that the proposed method can improve calculation speed by about five times. The synchronous analysis based on the proposed method was applied to a bearing fault detection in a high-speed rail carriage, which demonstrated the advantages of the proposed algorithm in improving the signal-to-noise ratio (SNR) for bearing damage feature extraction.
Bird strikes pose one of the most significant threats to aviation safety, often leading to substantial loss of life and economic damage. Many bird strike incidents involve multiple birds. However, in previous bird strike studies, the problem of multiple bird strikes has often been neglected. In this paper, the bird slicing process of a rotating engine fan is examined, and a probability model is introduced to assess the risk of multiple impacts on the fan blades. In addition, this paper utilized an implicit–explicit calculation method. The parameters of blade root stress, tip displacement, plastic deformation, and energy were selected to investigate the effects of the time interval and strike position of a bird strike on the dynamic response of and damage to the blades. The results indicated that the position of bird strikes has a more pronounced effect on blade damage compared to the time interval between impacts. Damage to a blade is most severe when the blade root is struck multiple times. Multiple bird strikes may not always lead to a significant increase in maximum blade tip displacement, and may even have a dampening effect.
The dynamic characteristics of planar mechanisms with fuzzy joint clearance and random geometry are studied in this paper. The dynamics model for the mechanism is constructed by utilizing Baumgarte approach in which the clearance size is a fuzzy number, while the geometry parameters are assumed as random variables. A hybrid contact force model, which consists of the Lankarani–Nikravesh model, improved Winkler elastic foundation model and modified Coulomb friction force model, is applied to construct revolute clearance joint. In order to solve the dynamics model, two methodologies are developed: confidence region method for quantification of random and fuzzy uncertainties (CRMQRFU) and confidence region method with transformation method (CRMTM). In the CRMQRFU, fuzzy numbers are first decomposed into intervals under the given membership level. Then, a general framework is proposed for quantification of random and interval uncertainties in the mechanism. In the CRMTM, a transformation method is applied to transform intervals into deterministic arrays, while probability theory is used to obtain the confidence regions under the given fuzzy values. The confidence region, considering random and fuzzy uncertainties, is obtained by fuzzy set theory. Finally, two examples are used to demonstrate the validity and feasibility of these methods.