Synchronous analysis is one of the most effective and practical techniques in rotating machinery diagnostics, especially in cases with variable speed operations. A modern analog-to-digital convertor (ADC) usually digitizes an analog signal to an equal time interval data series. Synchronous resampling converts the data series from an equal time interval data series to an equal shaft rotation angle interval data series. This conversion is usually achieved in the digital domain with the aid of shaft speed information, through either direct measurement or identification from a measured vibration signal, which is a time-consuming process. In order to improve the computational efficiency as well as the data processing accuracy, in this paper, a fast synchronous time-point calculation method based on an inverse function interpolation procedure is proposed. By identifying the inverse function of the instantaneous phase with respect to time, the calculation process of synchronous time points is optimized, which results in improved calculation efficiency and accuracy. These advantages are demonstrated by numerical simulations as well as experimental verifications. The numerical simulation results show that the proposed method can improve calculation speed by about five times. The synchronous analysis based on the proposed method was applied to a bearing fault detection in a high-speed rail carriage, which demonstrated the advantages of the proposed algorithm in improving the signal-to-noise ratio (SNR) for bearing damage feature extraction.
The utilization of multiscale entropy methods to characterize vibration signals has proven to be promising in intelligent diagnosis of mechanical equipment. However, in the current multiscale entropy methods, only the information in the low-frequency range is utilized and the information in the high-frequency range is discarded. In order to take full advantage of the information, in this paper, a fault feature extraction method utilizing the bidirectional composite coarse-graining process with fuzzy dispersion entropy is proposed. To avoid the redundancy of the full frequency range feature information, the Random Forest algorithm combined with the Maximum Relevance Minimum Redundancy algorithm is applied to feature selection. Together with the K-nearest neighbor classifier, a rolling bearing intelligent diagnosis framework is constructed. The effectiveness of the proposed framework is evaluated by a numerical simulation and two experimental examples. The validation results demonstrate that the extracted features by the proposed method are highly sensitive to the bearing health conditions compared with hierarchical fuzzy dispersion entropy, composite multiscale fuzzy dispersion entropy, multiscale fuzzy dispersion entropy, multiscale dispersion entropy, multiscale permutation entropy, and multiscale sample entropy. In addition, the proposed method is able to identify the fault categories and health states of rolling bearings simultaneously. The proposed damage detection methodology provides a new and better framework for intelligent fault diagnosis of rolling bearings in rotating machinery.
The main bearing supports the rotation of the main shaft of a wind turbine. It bears heavy dead weights as well as variable speed dynamic loading during operations; thus, it is a vulnerable part in a wind turbine drive train. Because of the low speed and time‐varying operations of the main bearing, vibrations generated by bearing faults are often weak in response amplitudes, low in frequency range, and smeared in damage feature energy. As a result, the applicability of the conventional acceleration envelope analysis (AEA) technique, a traditionally effective technology for bearing fault diagnosis, is limited in such cases. In order to resolve this, a modified AEA method specially designed for bearings with low and variable speed operation is proposed in this paper. First, the structural response is decomposed by means of variational mode decomposition (VMD) for the low frequency components to form a series of band‐limited intrinsic mode functions (BLIMFs). Next, weighting factors are determined for the BLIMFs by defined energy ratios. Finally, a new envelope is reconstructed by weighting the envelopes of each BLIMF for bearing fault diagnosis. The effectiveness and practicality of the proposed method for the diagnosis of main bearing faults in wind turbines is verified through the analysis of measured data from a wind turbine in the field. The proposed method provides an effective way for bearing fault diagnosis at low and variable rotational speeds.
20 June 2024 in Measurement Science and Technology
In some complex working conditions, such as variable speeds and variable loadings, events like bearing skidding and/or contact angle changing may happen during the operations. In such cases, order tracking based on the shaft speed, i.e. the first order tracking (FOT), can no longer completely eliminate the smearing effect on spectrum, and thus affects the bearing damage detection precision and accuracy. The existing second order tracking is unable to resolve these issues either in some cases. To resolve these problems, a new approach called time frequency analysis based second order tracking is developed in this paper. Based on the FOT, short-time Fourier transform and synchro-reassigning transform are used to obtain the actual fault characteristic order (FCO) information. Then the FCO is extracted by ridge searching approach to set new synchronous resampling clock. Finally, synchronous resampling and order tracking are combined to correct and enhance the bearing damage feature, resulting in more accurate damage feature extraction. The effectiveness of proposed method is verified by numerical simulations and practical examples as well. The results show that the proposed method can effectively correct the dispersion and deviation of the FCO induced by speed variations as well as operation condition variations, and thus significantly improve the damage feature extraction.
17 June 2025 in Measurement Science and Technology
In many complex operating environments of mechanical equipment, the collected vibration signals are easily contaminated by noise, which increases difficulty in fault diagnosis. To overcome the challenge of accurately diagnosing rolling bearing faults in rotate vector (RV) reducer under strong noise conditions, a fault diagnosis model with smooth Rectified Linear Unit (S-Relu) activation function and adaptive dual threshold noise reduction is proposed. Firstly, the receptive field of the neural network model is expanded by the dilated causal convolution, while preserving the temporal relationships within the data. Then, the S-Relu activation function is proposed to solve the limitations existing in the traditional activation function. Finally, an adaptive dual-threshold noise reduction method is proposed to mitigate the influence of a strong noise environment. The method adaptively adjusts the threshold according to the dynamic characteristics of the signal, and continuously reduces the noise through the shortcut connection method to filter out the noise thus enhancing the key fault feature information. The proposed method is validated with vibration signals collected from experiments of an RV reducer in the laboratory. Under the strong noise with signal-to-noise ratio of −8 dB, the diagnostic accuracy of the proposed method under different loads (0 N∙m, 625 N∙m, and 1250 N∙m) reaches 94.4%, 84.5%, and 80.3%, respectively. The classification accuracy of the proposed method is more than 99.38% without noise. The results show that the accuracy and reliability of the proposed method are significantly higher than that deduced by other commonly used advanced methods.