Wearable electronic textiles require flexible, lightweight, and sustainable energy-harvesting platforms. This study presents a proof-of-concept fabric-assisted thermally responsive voltage-generating prototype fabricated from recycled electronic and textile waste. Copper and aluminum current-collector foils recovered from discarded non-functional lithium-ion mobile-phone batteries, together with woven apparel cutting waste composed of 70% cotton, 28% polyester, and 2% elastane, were used as the main device components. The recovered conductive foils were cleaned, dried, and manually integrated into the textile substrate using a weaving and piercing-based approach. Under preliminary human forearm-contact testing, the fabricated prototype generated a maximum RMS open-circuit voltage of 180.75 mV at a body-to-ambient temperature difference of 5.82 K. The prototype also retained 90.73%, 86.88%, 81.33%, and 73.58% of its initial RMS open-circuit voltage after 100 rolling, bending, twisting, and folding cycles, respectively. However, the present study measured open-circuit voltage only, and contributions from contact potential, moisture-assisted galvanic effects, oxide layers, pressure-dependent contact resistance, electrochemical processes, and measurement artefacts cannot be fully excluded. Therefore, the results should be interpreted as preliminary proof-of-concept evidence rather than complete validation of practical thermoelectric power-generation performance. Future work should include controlled Seebeck measurements, direct active-junction temperature monitoring, current and power output, load matching, internal resistance, control samples, repeated trials, and durability testing.