Nazmunnahar Nazmunnahar

Mrs. Nazmunnahar Nazmunnahar

Earth and Environmental Sciences, University of Manchester, Manchester, UK
orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 March 2026 in Fibers
Verified
Journal Article
Open access
PDF file
AKAman Ul Azam Khan
Aman Ul Azam Khan
Nazmunnahar NazmunnaharNazmunnahar Nazmunnahar
Nazmunnahar Nazmunnahar
MRMD. Mehedi Hasan Roni
MD. Mehedi Hasan Roni
ASAURGHYA KUMAR SAHA
AURGHYA KUMAR SAHA
Zarin Tasnim BristyZarin Tasnim Bristy
Zarin Tasnim Bristy
Abdul Md MazidAbdul Md Mazid
Abdul Md Mazid
Conductive thread is an integral aspect of smart textiles in the domain of electronic textiles (e-textiles). This study unveils the development of twelve distinct variants of conductive threads using the twisting method: the fusion of copper filament with cotton and polyester threads. The threads are coated with a carbon paste solution enriched with dissolved sea salt. The carbon paste is obtained from non-functional dry cell batteries, conventionally categorized as hazardous electronic waste (e-waste), which underscores an economically viable and environmentally sustainable approach. Experiments proved that each variant demonstrates minimal electrical resistance. The lowest resistance, 0.0164 ± 0.0001 Ω/cm, was achieved by Carbon-Coated Cotton Twisted Copper Thread-II. Comparative evaluation with commercially available conductive threads, including Bekaert Bekinox® VN type (12/1x275/100z), indicated comparable or moderately lower resistance values for the developed copper-based threads. Mechanical–electrical stability under bending, twisting, and wash–dry cycles confirmed consistent conductive performance with minimal resistance variation. Practical demonstrations further validated the integration of the threads into fabric-based flexible circuits and wearable electronic systems. These findings demonstrate that twisted copper-based conductive threads derived from sustainable coating materials provide a promising alternative for smart textile and wearable electronic applications. Future research should focus on scalable fabrication, enhanced coating fixation, and long-term durability assessment.

14 July 2026 in Scientific Reports
Verified
Journal Article
Open access
PDF file
AKAman Ul Azam Khan
Aman Ul Azam Khan
Nazmunnahar NazmunnaharNazmunnahar Nazmunnahar
Nazmunnahar Nazmunnahar
MHMortuza Hasan
Mortuza Hasan
ABAbdul Baqui
Abdul Baqui
Atmospheric moisture is an abundant, renewable resource with potential for sustainable energy harvesting. While moisture-material interactions can generate electricity under ambient conditions, most current systems remain expensive, and produce voltages too low for direct use in wearable electronics. To address these limitations, we developed a moisture-driven electric generator (MEG) from waste biomass and recycled materials that convert ambient humidity into electrical output. The MEG integrates wild sugarcane fibers and recycled cigarette-butt cellulose with an upcycled carbon-paste layer, which enhances moisture uptake, ion dissociation, and directional ion migration across asymmetric current collectors. A single unit delivers up to 1.16 V and 16.44 µW cm −3 , operates under ambient humidity conditions, and restores voltage after drying following renewed natural moisture reabsorption. A basic conceptual model is proposed in which moisture adsorption within the hygroscopic composite promotes NaCl ion dissociation and directional ionic transport, leading to interfacial charge separation between asymmetric electrodes and the generation of a measurable potential difference. Scalable series/parallel configurations boost voltage and current, enabling direct operation of low-power electronic devices under maintained humid conditions without external capacitors. This low-cost approach highlights moisture-activated textile composites as sustainable power sources for self-powered and low-power electronic systems.

28 August 2026 in Fibers
Verified
Journal Article
Open access
PDF file
AKAman Ul Azam Khan
Aman Ul Azam Khan
Nazmunnahar NazmunnaharNazmunnahar Nazmunnahar
Nazmunnahar Nazmunnahar
ASAURGHYA KUMAR SAHA
AURGHYA KUMAR SAHA
Zarin Tasnim BristyZarin Tasnim Bristy
Zarin Tasnim Bristy
ABAbdul Baqui
Abdul Baqui
Abdul Md MazidAbdul Md Mazid
Abdul Md Mazid
Wearable electronic textiles require flexible, lightweight, and sustainable energy-harvesting platforms. This study presents a proof-of-concept fabric-assisted thermally responsive voltage-generating prototype fabricated from recycled electronic and textile waste. Copper and aluminum current-collector foils recovered from discarded non-functional lithium-ion mobile-phone batteries, together with woven apparel cutting waste composed of 70% cotton, 28% polyester, and 2% elastane, were used as the main device components. The recovered conductive foils were cleaned, dried, and manually integrated into the textile substrate using a weaving and piercing-based approach. Under preliminary human forearm-contact testing, the fabricated prototype generated a maximum RMS open-circuit voltage of 180.75 mV at a body-to-ambient temperature difference of 5.82 K. The prototype also retained 90.73%, 86.88%, 81.33%, and 73.58% of its initial RMS open-circuit voltage after 100 rolling, bending, twisting, and folding cycles, respectively. However, the present study measured open-circuit voltage only, and contributions from contact potential, moisture-assisted galvanic effects, oxide layers, pressure-dependent contact resistance, electrochemical processes, and measurement artefacts cannot be fully excluded. Therefore, the results should be interpreted as preliminary proof-of-concept evidence rather than complete validation of practical thermoelectric power-generation performance. Future work should include controlled Seebeck measurements, direct active-junction temperature monitoring, current and power output, load matching, internal resistance, control samples, repeated trials, and durability testing.

15 January 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
AKAman Ul Azam Khan
Aman Ul Azam Khan
Nazmunnahar NazmunnaharNazmunnahar Nazmunnahar
Nazmunnahar Nazmunnahar
MRMD. Mehedi Hasan Roni
MD. Mehedi Hasan Roni
ASAURGHYA KUMAR SAHA
AURGHYA KUMAR SAHA
Zarin Tasnim BristyZarin Tasnim Bristy
Zarin Tasnim Bristy
Abdul Md MazidAbdul Md Mazid
Abdul Md Mazid
Conductive thread is an integral aspect of smart textiles in the domain of electronic textiles (e-textiles). This study unveils the development of twelve distinct variants of conductive threads using twisting method, the fusion of copper filament with cotton and polyester threads. The threads are coated with a carbon paste solution enriched with dissolved sea salt. The carbon paste is obtained from non-functional dry cell batteries, conventionally categorized as hazardous electronic waste (e-waste), that underscores an economically viable and environmentally sustainable approach. Experiments proved that each variant demonstrates minimal electrical resistance. Comparative analysis against commercially available conductive threads on the market reveals a significant performance advantage. Notably, the ‘Carbon Coated Cotton Twisted Copper Thread-II’ showcases a record low resistance of 0.0164 Ω cm-1 which is approximately 19.39 times lower than the most efficient counterpart, ‘Bekinox VN type (12/1x275/100z)’. Further investigation also demonstrates the integration of these conductive threads into fabric-based flexible circuits marking a significant advancement in e-textiles. Future avenues of research may focus on optimization strategies for fabricating conductive threads and exploring their diverse applications in wearable technology and smart textiles, thus catalyzing further progress in the field.

13 May 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
AKAman Ul Azam Khan
Aman Ul Azam Khan
Nazmunnahar NazmunnaharNazmunnahar Nazmunnahar
Nazmunnahar Nazmunnahar
ASAURGHYA KUMAR SAHA
AURGHYA KUMAR SAHA
Zarin Tasnim BristyZarin Tasnim Bristy
Zarin Tasnim Bristy
ABAbdul Baqui
Abdul Baqui
Abdul Md MazidAbdul Md Mazid
Abdul Md Mazid
Wearable electronic textiles (e-textiles) are increasingly being explored for healthcare, sports, military, and smart wearable applications, creating a growing demand for sustainable and flexible energy harvesting systems. In this study, a cost-effective and ultra-flexible textile-assisted thermoelectric generator (TEG) was developed using recycled electronic and textile waste materials. Discarded copper and aluminum foils recovered from electronic waste were integrated into a recycled woven fabric composed of 70% cotton, 28% polyester, and 2% elastane to fabricate the wearable thermoelectric device. The fabricated system demonstrated a measurable thermoelectric response, producing a maximum output voltage of 180.75 mV under a temperature difference (ΔT) of 5.82 K. The results demonstrate the feasibility of utilizing waste-derived conductive materials and recycled textiles for flexible thermoelectric energy harvesting applications. In addition to its lightweight and wearable structure, the developed device highlights the potential of sustainable smart textile systems for low-power wearable electronics and self-powered sensing applications. This work contributes to the advancement of environmentally sustainable smart textiles by combining waste reutilization, wearable energy harvesting, and flexible electronic integration within a single textile platform. Future research may focus on improving thermal contact efficiency, long-term durability, output stability, and scalable fabrication strategies for practical wearable energy harvesting applications.