Qinghai–Tibet plateau (QTP) is closely related to global climate change, and it has undergone serious permafrost degradation due to global warming in the last decades. It is crucial to measure the active layer thickness (ALT) for characterizing and monitoring the permafrost degradation of QTP. In this paper, an ALT retrieval model based on ground subsidence derived from synthetic aperture radar interferometry (InSAR), land cover types, and groundwater information is proposed. In particular, the surface subsidence is retrieved using the time-series InSAR technique with TerraSAR-X ST mode images. Moreover, groundwater content models with different land covers are constructed based on multilayered assumptions and in situ data. By taking into account the groundwater content profile and land cover types, the ALT is retrieved from deformation with the full season cycle derived by InSAR technique. The experimental results in Beiluhe indicate that the estimated ALT is consistent with field-measured data. The estimated ALT map shows the difference between the alpine meadow and alpine desert areas, with mean ALT of approximately 1.5 m in alpine meadow area and approximately 3 m in alpine desert area. Our results demonstrate that the InSAR technique with high-resolution SAR images can be of great importance for the study of permafrost environments.

The elimination of hunger is the top concern for developing countries and is the key to maintain national stability and security. Paddy rice occupies an essential status in food supply, whose accurate monitoring is of great importance for human sustainable development. As one of the most important paddy rice production countries in the world, Thailand has a favorable hot and humid climate for paddy rice growing, but the growth patterns of paddy rice are too complicated to construct promising growth models for paddy rice discrimination. To solve this problem, this study proposes a large-scale paddy rice mapping scheme, which uses time-series Sentinel-1 data to generate a convincing annual paddy rice map of Thailand. The proposed method extracts temporal statistical features of the time-series SAR images to overcome the intra-class variability due to different management practices and modifies the U-Net model with the fully connected Conditional Random Field (CRF) to maintain the edge of the fields. In this study, 758 Sentinel-1 images that covered the whole country from the end of 2018 to 2019 were acquired to generate the annual paddy rice map. The accuracy, precision, and recall of the resultant paddy rice map reached 91%, 87%, and 95%, respectively. Compared to SVM classifier and the U-Net model based on feature selection strategy (FS-U-Net), the proposed scheme achieved the best overall performance, which demonstrated the capability of overcoming the complex cultivation conditions and accurately identifying the fragmented paddy rice fields in Thailand. This study provides a promising tool for large-scale paddy rice monitoring in tropical production regions and has great potential in the global sustainable development of food and environment management.

Permafrost is widely distributed in the Tibetan Plateau. Seasonal freeze–thaw cycles of permafrost result in upward and downward surface displacement. Multitemporal interferometric synthetic aperture radar (MT-InSAR) observations provide an effective method for monitoring permafrost displacement under difficult terrain and climatic conditions. In this study, a seasonal sinusoidal model-based new small baselines subset (NSBAS) chain was adopted to obtain a deformation time series. An experimental study was carried out using 33 scenes of Sentinel-1 data (S-1) from 28 November 2017 to 29 December 2018 with frequent revisit (12 days) observations. The spatial and temporal characteristics of the surface displacements variation combined with different types of surface land cover, elevation and surface temperature factors were analyzed. The results revealed that the seasonal changes observed in the time series of ground movements, induced by freeze–thaw cycles were observed on flat surfaces of sedimentary basins and mountainous areas with gentle slopes. The estimated seasonal oscillations ranged from 2 mm to 30 mm, which were smaller in Alpine deserts than in Alpine meadows. In particular, there were significant systematic differences in seasonal surface deformation between areas near mountains and sedimentary basins. It was also found that the time series of deformation was consistent with the variation of surface temperature. Based on soil moisture active/passive (SMAP) L4 surface and root zone soil moisture data, the deformation analysis influenced by soil moisture factors was also carried out. The comprehensive analysis of deformation results and auxiliary data (elevation, soil moisture and surface temperature et al.) provides important insights for the monitoring of the seasonal freeze-thaw cycles in the Tibetan Plateau.

Rock glaciers represent typical periglacial landscapes and are distributed widely in alpine mountain environments. Rock glacier activity represents a critical indicator of water reserves state, permafrost distribution, and landslide disaster susceptibility. The dynamics of rock glacier activity in alpine periglacial environments are poorly quantified, especially in the central Himalayas. Multi-temporal Interferometric Synthetic Aperture Radar (MT-InSAR) has been shown to be a useful technique for rock glacier deformation detection. In this study, we developed a multi-baseline persistent scatterer (PS) and distributed scatterer (DS) combined MT-InSAR method to monitor the activity of rock glaciers in the central Himalayas. In periglacial landforms, the application of the PS interferometry (PSI) method is restricted by insufficient PS due to large temporal baseline intervals and temporal decorrelation, which hinder comprehensive measurements of rock glaciers. Thus, we first evaluated the rock glacier interferometric coherence of all possible interferometric combinations and determined a multi-baseline network based on rock glacier coherence; then, we constructed a Delaunay triangulation network (DTN) by exploiting both PS and DS points. To improve the robustness of deformation parameters estimation in the DTN, we combined the Nelder–Mead algorithm with the M-estimator method to estimate the deformation rate variation at the arcs of the DTN and introduced a ridge-estimator-based weighted least square (WLR) method for the inversion of the deformation rate from the deformation rate variation. We applied our method to Sentinel-1A ascending and descending geometry data (May 2018 to January 2019) and obtained measurements of rock glacier deformation for 4327 rock glaciers over the central Himalayas, at least more than 15% detecting with single geometry data. The line-of-sight (LOS) deformation of rock glaciers in the central Himalayas ranged from −150 mm to 150 mm. We classified the active deformation area (ADA) of all individual rock glaciers with the threshold determined by the standard deviation of the deformation map. The results show that 49% of the detected rock glaciers (monitoring rate greater than 30%) are highly active, with an ADA ratio greater than 10%. After projecting the LOS deformation to the steep slope direction and classifying the rock glacier activity following the IPA Action Group guideline, 12% of the identified rock glaciers were classified as active and 86% were classified as transitional. This research is the first multi-baseline, PS, and DS network-based MT-InSAR method applied to detecting large-scale rock glaciers activity.

The three-dimensional (3-D) displacements of mining areas is the basis of studying the mining subsidence law and obtaining surface movement parameters. The traditional multi-temporal interferometry synthetic aperture radar (InSAR) technology can only obtain the surface deformation in line-of-sight (LOS) direction, even if some methods can obtain the 3-D displacements of mining area based on InSAR. However, it has high data requirements for data types, which are not conducive to the inversion of 3-D displacements. In this paper, the symmetry of the surface basin caused by mining subsidence under different mining degrees is analyzed. According to the basic symmetrical features of mining subsidence—that the surface vertical displacement and horizontal displacement in near horizontal coal seam is symmetrical with respect to the main section of the basin, combined with time series InSAR technology (TS-InSAR)—a novel method for retrieving the 3-D displacement results from a single-geometry InSAR dataset based on symmetrical features (hereafter referred to as the SGI-SF method) is proposed. The SGI-SF method first generates multi-temporal observations of LOS displacement from a single-geometry InSAR dataset, and then transforms them into multi-temporal observations of 3-D displacement datasets according to symmetrical features. There is no necessity to obtain the surface movement parameters from the measured data to calculate 3-D displacement fields. Finally, the time series of 3-D displacements are estimated from multi-temporal 3-D displacements using the singular value decomposition (SVD) method. Nine descending Sentinel-1 images from the Yulin mining area of China are used to test the proposed SGI-SF method. The results show that the average root mean square errors (RMSE) in the vertical and horizontal direction of the three-dimensional deformations are approximately 9.28 mm and 13.10 mm, respectively, which are much smaller than mining-induced displacements and can provide support for deformation monitoring in mining areas.