Global warming is one of the most compelling environmental threats today, as the rise in energy consumption and CO₂ emission caused a dreadful impact on our environment. The data centers, computing devices, network equipment, etc., consume vast amounts of energy that the thermal power plants mainly generate. Primarily fossil fuels like coal and oils are used for energy generation in these power plants that induce various environmental problems such as global warming ozone layer depletion, which can even become the cause of premature deaths of living beings. The recent research trend has shifted towards optimizing energy consumption and green fields since the world recognized the importance of these concepts. This paper aims to conduct a complete systematic mapping analysis on the impact of high energy consumption in cloud data centers and its effect on the environment. To answer the research questions identified in this paper, one hundred nineteen primary studies published until February 2022 were considered and further categorized. Some new developments in green cloud computing and the taxonomy of various energy efficiency techniques used in data centers have also been discussed. It includes techniques like VM Virtualization and Consolidation, Power-aware, Bio-inspired methods, Thermal-management techniques, and an effort to evaluate the cloud data center’s role in reducing energy consumption and CO₂ footprints. Most of the researchers proposed software level techniques as with these techniques, massive infrastructures are not required as compared with hardware techniques, and it is less prone to failure and faults. Also, we disclose some dominant problems and provide suggestions for future enhancements in green computing.

Efficient clustering and routing is a main challenge in a wireless sensor network (WSN). To achieve better quality-of-service (QoS) performance, this work introduces k-medoids with improved artificial-bee-colony (K-IABC)-based energy-efficient clustering and the cross-layer-based Harris-hawks-optimization-algorithm (CL-HHO) routing protocol for WSN. To overcome the power-asymmetry problem in wireless sensor networks, a cross-layer-based optimal-routing solution is proposed. The goal of cross-layer routing algorithms is to decrease network-transmission delay and power consumption. This algorithm which was used to evaluate and select the effective path route and data transfer was implemented using MATLAB, and the results were compared to some existing techniques. The proposed CL-HHO performs well in packet-loss ratio (PLR), throughput, end-to-end delay (E2E), jitter, network lifetime (NLT) and buffer occupancy. These results are then validated by comparing them to traditional routing strategies such as hierarchical energy-efficient data gathering (HEED), energy-efficient-clustering routing protocol (EECRP), Grey wolf optimization (GWO), and cross-layer-based Ant-Lion optimization (CL-ALO). Compared to the HEED, EECRP, GWO, and CL-ALO algorithms, the proposed CL-HHO outperforms them.

Recently, various methods have been developed to identify COVID-19 cases, such as PCR testing and non-contact procedures such as chest X-rays and computed tomography (CT) scans. Deep learning (DL) and artificial intelligence (AI) are critical tools for early and accurate detection of COVID-19. This research explores the different DL techniques for identifying COVID-19 and pneumonia on medical CT and radiography images using ResNet152, VGG16, ResNet50, and DenseNet121. The ResNet framework uses CT scan images with accuracy and precision. This research automates optimum model architecture and training parameters. Transfer learning approaches are also employed to solve content gaps and shorten training duration. An upgraded VGG16 deep transfer learning architecture is applied to perform multi-class classification for X-ray imaging tasks. Enhanced VGG16 has been proven to recognize three types of radiographic images with 99% accuracy, typical for COVID-19 and pneumonia. The validity and performance metrics of the proposed model were validated using publicly available X-ray and CT scan data sets. The suggested model outperforms competing approaches in diagnosing COVID-19 and pneumonia. The primary outcomes of this research result in an average F-score (95%, 97%). In the event of healthy viral infections, this research is more efficient than existing methodologies for coronavirus detection. The created model is appropriate for recognition and classification pre-training. The suggested model outperforms traditional strategies for multi-class categorization of various illnesses.

Computer memory comprises temporarily or permanently stored data and instructions, which are utilized in electronic digital computers. The opposite of serial access memory is Random Access Memory (RAM), where the memory is accessed immediately for both reading and writing operations. There has been a vast technological improvement, which has led to tremendous information on the amount of complexity that can be designed on a single chip. Small feature sizes, low power requirements, low costs, and great performance have emerged as the essential attributes of any electronic component. Designers have been forced into the sub-micron realm for all these reasons, which places the leakage characteristics front and centre. Many electrical parts, especially digital ones, are made to store data, emphasising the need for memory. The largest factor in the power consumption of SRAM is the leakage current. In this article, a 1 KB memory array was created using CMOS technology and a supply voltage of 0.6 volts employing a 1-bit 6T SRAM cell. We developed this SRAM with a 1-bit, 32- × 1-bit, and 32 × 32 configuration. The array structure was implemented using a 6T SRAM cell with a minimum leakage current of 18.65 pA and an average delay of 19 ns. The array structure was implemented using a 6T SRAM cell with a power consumption of 48.22 μW and 385 μW for read and write operations. The proposed 32 × 32 memory array SRAM performed better than the existing 8T SRAM and 7T SRAM in terms of power consumption for read and write operations. Using the Cadence Virtuoso tool (Version IC6.1.8-64b.500.14) and 22 nm technology, the functionality of a 1 KB SRAM array was verified.

Technology evaluation in the electronics field leads to the great development of Wireless Sensor Networks (WSN) for a variety of applications. The sensor nodes are deployed in hazardous environments, and they are operated by isolated battery sources. Network connectivity is purely based on power availability, which impacts the network lifetime. Hence, power must be used wisely to prolong the network lifetime. The sensor nodes that fail due to power have to detect quickly to maintain the network. In a WSN, classifiers are used to detect the faults for checking the data generated by the sensor nodes. In this paper, six classifiers such as Support Vector Machine, Convolutional Neural Network, Multilayer Perceptron, Stochastic Gradient Descent, Random Forest and Probabilistic Neural Network have been taken for analysis. Six different faults (Offset fault, Gain fault, Stuck-at fault, Out of Bounds, Spike fault and Data loss) are injected in the data generated by the sensor nodes. The faulty data are checked by the classifiers. The simulation results show that the Random Forest detected more faults and it also outperformed all other classifiers in that category.