Seven different substrates were prepared by mixing red soil, humus and river sand in different volume ratios and the growth and yield of Amorphophallus muelleri bulbils in different substrates was investigated. The growth of A. muelleri seedlings were tracked during the reproductive period, with measurements taken of indicators such as petiole length, petiole basal diameter and leaf size during the late period of leaf expansion. Number of surviving plants, weights and sizes of corms, and leaf bulbils were recorded after lodging. The results showed that there were differences in the physical and chemical properties of the seven substrates, but all met the growth requirements of A. muelleri. T1 (river sand), T2 (river sand: humus 1:1), T3 (humus), and T7 (river sand: humus: red soil 1:1:1) had higher emergence rates, reaching 95 %. T4 (humus: red soil 1:1) and T7 had better growth, with larger petiole and leaf sizes than other substrates. T3, T4, and T7 had higher yields, with a bulbil yield of 0.30 t hm⁻² and a corm yield of 22.06 t hm⁻². Compared to the use of a single substrate, whether river sand, humus, or red soil, the proportional mixture of the three test materials improved the physical structure and chemical composition of the substrate, contributing to the growth of A. muelleri. T7 (river sand: humus: red soil 1:1:1) was was found to be the best nursery substrate for A. muelleri.

The moisture, ash, and silicon content, as well as the phytolith morphotype and concentration in the tissue-cultured, seed-cultured, and grafted seedling leaves of Dendrocalamus brandisii were determined to investigate the differences in silicon uptake and phytolith morphology in the leaves from different rearing methods. The results showed that ash, silicon content, and phytolith concentration were higher in the mature leaves. Tissue-cultured seedlings had a significantly higher moisture content than grafted seedlings. Ash and silicon demonstrated the same order of grafted seedlings > tissue-cultured seedlings > seed-cultured seedlings. The highest phytolith concentration was found in tissue-cultured seedlings. The phytolith morphotypes in D. brandisii seedling leaves raised by different methods were identical and grouped into eight morphotypes. The phytolith assemblage was characterized by a high frequency of bilobate and saddle, accounting for more than 60%, whereas the morphotypes of elongate, blocky, flabellate, and circular phytoliths accounted for the smallest proportion, normally all below 4.5%. The phytolith size demonstrated an increasing trend in the maturing leaves. The sizes of bilobate, saddle, and acute phytoliths expanded the fastest in tissue-cultured seedling leaves, implying rapid growth of the cell in tissue-cultured seedlings. Accordingly, the tissue-cultured seedlings contained more silicon and phytoliths of larger sizes, which could be a better choice of stock supply for establishing large-scale plantations. If the stock of the seed-cultured and grafted seedlings is to be used, silicon fertilizer application is an optimal option to boost seedling growth.

Bamboo is an efficient silicon accumulator with diverse phytolith morphotypes and composition. The bamboo culm sheath, traditionally considered as a modified leaf, plays a key role in bamboo taxonomy and provides significant mechanical and physiological support for shoot development, but its silicon deposition and phytolith morphological variation remain underexplored. We investigated silicon variation and phytolith morphology in D. brandisii culm sheaths at different growth stages. The results showed that silicon deposition in D. brandisii culm sheaths at different growth stages was comparable to foliage leaves but significantly greater than branches as in previous research. Phytolith concentration in the culm sheath blades of D. brandisii was higher, associated with their greater silicon content than the sheath bodies. Silicon precipitated and phytoliths were produced as the culm sheath matured. Silicon and phytolith contents were significantly greater in upper culm sheath bodies. D. brandisii culm sheaths were characterized by a high proportion of rondel phytoliths, whereas bilobate and bulliform flabellate phytoliths were not observed. Circular and saddle phytoliths accounted for a very low proportion. Stomata phytoliths were abundant in culm sheaths at the shooting stage and increased with sheath maturation, which supported the transpiration, respiration and photosynthesis in culm sheaths of the shoots. Elongate and acute phytoliths were extremely abundant in D. brandisii culm sheaths and increased with sheath maturation, which enhanced the mechanical and protective role of the culm. The phytolith morphotypes in D. brandisii culm sheaths did not demonstrate a specific trend with sheath position. Saddle phytoliths showed insignificant variation in D. brandisii culm sheaths.

Phytoliths are widely used in plant taxonomy, paleoecology, soil silicon cycling, and agricultural archaeology. Bamboo has a strong capacity for silicon absorption, and there are some phytoliths in various organs. In this paper, the leaf organs (leaf blade, leaf sheath, culm sheath, and culm blade) of three kinds of bamboos [B. vulgaris (Bambusa vulgaris), B. tulda (Bambusa tulda), and B. dolichoclada (Bambusa dolichoclada)] were studied; the content, concentration, particle size distribution, and morphological characteristics of phytoliths in leaf organs were analyzed to explore the differences of phytoliths in different functional leaf organs of bamboo. The results showed that the content and concentration of phytoliths were the highest in the leaf sheath and the lowest in the culm sheath, and the content and concentration of phytoliths in the leaf blade and culm blade were between them. For different bamboo species, the order of phytolith content was B. dolichoclada > B. tulda > B. vulgaris, while the phytolith concentration was the opposite. The highest values of phytolith particle size peak distribution in the leaf sheaths were the opposite to those in leaf blades, culm sheaths, and culm blades. The particle sizes of phytoliths of the three bamboo species showed a similar trend. Only a few larger phytolith particle sizes were distributed in leaf blades and culm blades when they were larger than 400 μm. A total of 25 types of phytoliths were identified, and the leaf sheaths were mainly elongate and rondel phytoliths. The leaf blades are mainly saddle and rondel phytoliths with a unique phytolith morphology. Culm sheaths are dominated by rondel, scrobiculate, and acute phytoliths. Culm blades are similar to leaf blades but have a characteristic phytolith morphology. In addition, saddle phytoliths were the most abundant in the leaf blade and the least in the culm sheath, while rondel phytoliths were the most abundant in the culm blade and the least in the leaf sheath. The parameters of long-saddle phytoliths are different in different bamboo species and leaf organs. According to the long saddle phytolith parameters of different bamboo species, different bamboo species can be quantitatively distinguished to a certain extent. Therefore, this study not only helps to understand the differences in phytoliths in different bamboo species and leaf organs, but also provides a theoretical basis for bamboo species classification.

[Background] Brasenia schreberi is a perennial floating leaf aquatic plant with high ecological protection value and potential for economic development, and thus, its endangered mechanisms are of great concern. The rapid endangerment of this species in modern times may be primarily attributed to the deterioration of water and soil environmental conditions, as its growth relies on high-quality water and soil. [Objective] Exploring the responses of B. schreberi to water and soil conditions from the perspective of functional traits is of great significance for understanding its endangered mechanisms and implementing effective conservation strategies. [Methods] This study was conducted in the Tengchong Beihai Wetland, which has the largest natural habitat of B. schreberi in China. By measuring the key functional traits of B. schreberi and detecting the water and soil parameters at the collecting sites, the responses of these functional traits to the water and soil conditions have been investigated. [Results] (1) The growth status of B. schreberi affects the expression of its functional traits. Compared with sporadic distribution, B. schreberi in continuous patches have significantly higher stomatal conductance, intercellular CO₂ concentration, transpiration rate, and vein density, while these plants have significantly smaller leaf area and perimeter. (2) Good water quality directly promotes photosynthetic, morphological, and structural traits. However, high soil carbon, nitrogen, and phosphorus contents can inhibit the photosynthetic rate. The net photosynthetic rate is significantly positively correlated with dissolved oxygen content, pH value, ammonia nitrogen, and nitrate nitrogen contents in the water, as well as the magnesium, zinc, and silicon contents in the soil. In contrast, the net photosynthetic rate is significantly negatively correlated with the total phosphorus content in water and the total carbon, total nitrogen, and total phosphorus content in the soil. (3) Leaf area and perimeter show positive correlations with various water parameters, including the depth, temperature, pH value, dissolved oxygen content, ammonium nitrogen, and nitrate nitrogen content, yet they are negatively correlated with total phosphorus content, chemical oxygen demand, biological oxygen demand, and permanganate index of water. [Conclusions] This study supports the idea that B. schreberi thrives in oligotrophic water environments, while the notion that fertile soil is required for its growth still needs to be investigated more thoroughly.

Phytoliths play a crucial role in plant growth and development. This paper analyzes the characterization of the culm sheath phytoliths of Bambusa vulgaris f.vittata across different geographic environments. The extraction of phytoliths was performed using microwave digestion, and the morphology of the phytolith was observed microscopically. The culm sheaths of Bambusa vulgaris f.vittata from GXNN, XSBN, GZGD, FJFZ, and FAFU Bambusa vulgaris f.vittata were selected for the study. The results indicated that the phytolith content and concentration were ranked as FJFZ > XSBN > GXNN > FAFU > GZHN, and the phytolith content and concentration were geographically significantly different. Saddle, Rondel, Silica stoma, and Scrobiculate (>70%) were observed in culm sheaths developed in different geographic environments, and phytolith morphology assemblages are largely homogeneous by genetic conservatism, but the proportion of each morphology varies across geographic environments. The main distribution of phytolith particle size ranges from 0 to 100 μm, with the highest peak in the 10–20 μm interval, followed by a decrease, and an elevation of up to 100–200 μm, followed by a significant reduction. The small size of the phytolith morphology was influenced by climatic factors. Specifically, the length, width, and area of XSBN increased with higher precipitation levels. Similarly, both the length and width of GDGZ also increased with increased precipitation. For FJFZ, the length increased with riding temperatures, while its width increased with higher precipitation. Additionally, the width of GXNN expanded with increasing temperatures. The present study supplemented the phytoliths analysis of the culm sheaths of Bambusa vulgaris f.vittata, which provided reference value for further research on the ability of Bambusa vulgaris f.vittata in carbon sequestration and other aspects, and contributed essential data for the robust development of the bamboo industry. Moreover, bamboo plants represent a significant natural solution to climate change, offering ecological, economic, and social benefits. This further encourages the protection of natural bamboo forests, the expansion of artificial cultivation, and the vigorous promotion of the bamboo industry and bamboo products. By maximizing their critical roles in forest carbon sequestration and climate regulation, bamboo plants provide a viable solution for global climate governance.