As LoRaWAN networks are actively being deployed in the field, it is important to comprehend the limitations of this low power wide area network technology. Previous work has raised questions in terms of the scalability and capacity of LoRaWAN networks as the number of end devices grows to hundreds or thousands per gateway. Some works have modeled LoRaWAN networks as pure ALOHA networks, which fails to capture important characteristics such as the capture effect and the effects of interference. Other works provide a more comprehensive model by relying on empirical and stochastic techniques. This paper uses a different approach where a LoRa error model is constructed from extensive complex baseband bit error rate simulations and used as an interference model. The error model is combined with the LoRaWAN MAC protocol in an ns-3 module that enables to study multichannel, multispreading factor, multigateway, bi-directional LoRaWAN networks with thousands of end devices. Using the LoRaWAN ns-3 module, a scalability analysis of LoRaWAN shows the detrimental impact downstream traffic has on the delivery ratio of confirmed upstream traffic. The analysis shows that increasing gateway density can ameliorate but not eliminate this effect, as stringent duty cycle requirements for gateways continue to limit downstream opportunities.
LoRa is a long-range, low power, low bit rate and single-hop wireless communication technology. It is intended to be used in Internet of Things (IoT) applications involving battery-powered devices with low throughput requirements. A LoRaWAN network consists of multiple end nodes that communicate with one or more gateways. These gateways act like a transparent bridge towards a common network server. The amount of end devices and their throughput requirements will have an impact on the performance of the LoRaWAN network. This study investigates the scalability in terms of the number of end devices per gateway of single-gateway LoRaWAN deployments. First, we determine the intra-technology interference behavior with two physical end nodes, by checking the impact of an interfering node on a transmitting node. Measurements show that even under concurrent transmission, one of the packets can be received under certain conditions. Based on these measurements, we create a simulation model for assessing the scalability of a single gateway LoRaWAN network. We show that when the number of nodes increases up to 1000 per gateway, the losses will be up to 32%. In such a case, pure Aloha will have around 90% losses. However, when the duty cycle of the application layer becomes lower than the allowed radio duty cycle of 1%, losses will be even lower. We also show network scalability simulation results for some IoT use cases based on real data.
As the IoT continues to grow over the coming years, resource-constrained devices and networks will see an increase in traffic as everything is connected in an open Web of Things. The performance- and function-enhancing features are difficult to provide in resource-constrained environments, but will gain importance if the WoT is to be scaled up successfully. For example, scalable open standards-based authentication and authorization will be important to manage access to the limited resources of constrained devices and networks. Additionally, features such as caching and virtualization may help further reduce the load on these constrained systems. This work presents the Secure Service Proxy (SSP): a constrained-network edge proxy with the goal of improving the performance and functionality of constrained RESTful environments. Our evaluations show that the proposed design reaches its goal by reducing the load on constrained devices while implementing a wide range of features as different adapters. Specifically, the results show that the SSP leads to significant savings in processing, network traffic, network delay and packet loss rates for constrained devices. As a result, the SSP helps to guarantee the proper operation of constrained networks as these networks form an ever-expanding Web of Things.
Gateway or cloud based interaction models are widely used for automation solutions that use networked sensors and actuators. In this model, every sensor/actuator interaction goes through the gateway or via the cloud. In order to realize the true Internet of Things philosophy where everything is interconnected, direct interactions between sensors and actuators, also called bindings, are important. In addition to this, alternative IoT application development models which facilitate application development and improve efficiency are required. In this paper, we first introduce a CoAP based sensor/actuator binding solution where a 3rd party is responsible for setting up the binding, but is not involved in any of the further interactions. Next, the binding concept is extended to introduce (pre-)processing into the sensor/actuator interactions in the form of RESTlets. RESTlets are small application building blocks with internal processing logic and RESTful interfaces for input, control and output. Finally, we present how IoT applications can be created by binding different RESTlets to each other and to sensors and actuators.
Offshore platforms are subjected to wind, waves and tidal flows. Tidal flow will generate a steady current, which induces a lift force and a drag force on the platform legs. In addition, water particle velocities induced by waves give rise to an oscillatory flow. As a result, the structure will experience a lift, drag and inertia force when subjected to wave-induced flow patterns. On top of that, a turbulent Von Karman vortex street can appear in the wake of the platform legs for certain combinations of dimensions and flow velocities. Vortex shedding can lead to vortex induced vibrations, which may jeopardize the integrity of the entire offshore platform. Environmental loads can cause significant deformations of offshore structures, which can in turn influence the fluid flow. Multiphysics modelling is required to capture the mechanisms governing fluid-structure interaction. In this paper, a Coupled Eulerian Lagrangian (CEL) approach is pursued to simulate offshore platform movements in strong tidal flows. In a CEL analysis, the fluid flow is modelled in an Eulerian framework: the water is described by an equation of state, and can flow freely through a fixed mesh. The offshore platform is modelled as a compliant structure in a traditional Lagrangian formulation, where the nodes move with the underlying material. Interaction between the fluid domain and the offshore structure is enforced using general contact conditions. The strongly coupled problem is then tackled with an explicit solver. Here, the CEL approach is demonstrated to simulate the movement of an offshore jack-up barge. The response of the vessel is calculated for different flow conditions. The multiphysics model allows evaluating the added value of structural redundancy, e.g. in the number of platform legs required for a safe design. In addition, it provides a valuable tool to predict the tidal windows allowed for given operational conditions.