In the present condition of COVID-19, the demand for antimicrobial products such as face masks and surgical gowns has increased. Because of this increasing demand, there is a need to conduct a study on the development of antimicrobial material. Therefore, this study was conducted on the development of Aloe Vera and Polyvinyl Alcohol (AV/PVA) electrospun nanofibers. Four different fibers were developed by varying the concentrations of Aloe vera (0.5%, 1.5%, 2.5%, and 3%) while maintaining the concentration of PVA constant. The developed samples were subjected to different characterization techniques such as SEM, FTIR, XRD, TGA, and ICP studies. After that, the antimicrobial activity of the developed Aloe Vera/PVA electrospun nanofibers was checked against Gram-positive (Staphylococcus aureus) bacteria and Gram-negative (Escherichia coli) bacteria. The developed nanofibers had high profile antibacterial activity against both bacteria, but showed excellent results against S. aureus bacteria as compared with E. coli. These nanofibers have potential applications in the development of surgical gowns, gloves, etc.
Textile-based Scaffolds preparation has the attractive features to fulfill the stated and implied needs of the consumer but there are still challenges of stability, elongation, appreciable bio-compatibility, and stated hydrophilic behavior. To overcome these challenges, the authors tried to fabricate a scaffold by blending of two highly biocompatible polymers; polyvinyl alcohol and poly(1,4 cyclohexane isosorbide terephthalate) through co-electrospinning. The resultant scaffold by the stated innovative approach evaluated from different characterizations such as dimensional stability/morphology was evaluated by scanning electron microscopy, chemical interactions by that Fourier transmission infrared spectra, wetting behavior was analyzed by a static angle with a contact angle meter from drop method, elongation was examined by tensile strength tester and in-vitro assessment was done by MTT analysis. Based on verified results, it was concluded that PVA/PICT scaffold has a potential for dual nature of hydrophilicity & hydrophobicity and appreciable cell culture growth, stated dimensional stability and suitable elongation as per requirements of the nature of scaffold.
16 September 2023 in Journal of the European Ceramic Society
Finishes bring an alteration to the physical and comfort properties of the textiles. That’s why various finishes are used to impart various functionalities to the fabric surface. However, it may also affect some properties. The purpose of this study is to investigate the effect of various finishes on pilling, mass per unit area, bursting strength, and wicking behavior of the polyester weft-knitted jersey fabric. Herein, 100% spun polyester weft-knitted plain jersey fabric was exposed to different finish treatments to check their effect on the some physical and comfort properties of the fabric like mass per unit area, pilling behavior, bursting strength, and wicking properties of the weft-knitted jersey fabric. The fabric used was knit from 24/1, 100% spun polyester yarn on the single knit circular knitting machine. The developed fabric was washed on Fong machine. Finishes are applied on fabric by “Monofort Stanter” machine. The resultant fabric was characterized by random tumble pilling tester, bursting strength tester, and wicking tester to analyze their pilling grade, bursting strength, and wicking behavior respectively. A significant increase has been found in wicking behavior, mass per unit area, and bursting strength of the fabric after finishing treatments. Moreover, the wicking finish shows the highest reduction in pilling grade from 3.5 to 2.5. Significant improvement has been observed in bursting strength by all finish’s treatment. However, wicking finish treatment results in the highest increase in bursting strength of 4.2%. Significant improvement has been observed in the vertical wicking speed of all treatment except silicon finish which significantly reduces vertical wicking rate. However, the wicking finish (Recipe E) shows the highest increase in wicking rate by 13.75 times as compared to grey fabric.