Higher frequency bands, especially millimeter wave (mmWave), are a key enabler for future high speed railway (HSR) wireless communication systems. Hybrid analog and digital beamforming (HBF) schemes operating at mmWave frequency bands can exploit the sparse nature of the channel by using large scale antenna arrays (LSAs) to shape multiple beams that overcome the severe path loss. However, due to the long and straight geometric characteristic of the rail track, there is a significant variance in the train-to-ground communication rate when the train is near or far from the BS. To address this issue, a novel hybrid beamforming scheme is developed based on a non-uniform beam design. We first model and investigate different beam design schemes in terms of spectral efficiency. Then, an efficient straight route based adaptively analog beamforming scheme with the non-uniform beam is proposed for HSR, which is designed to resist path loss. Finally, an adaptive non-uniform HBF algorithm based on the orthogonal matching pursuit method (OMP) is developed to minimize the rate gap between different locations by selecting the appropriate predefined beams. Numerical results show that the proposed hybrid beamforming scheme can efficiently ensure signal coverage, and reduce the variance of the train-to-ground communication rate along a straight track route.
26 September 2023 in IEEE Internet of Things Journal
The Industrial Internet of Things (IIoT) enables machines to communicate robustly. High reliability, high throughput, and low latency are the critical capabilities of IIoT, which have posed great challenges to existing wireless solutions for industrial applications. Due to the vast available bandwidth, the emerging millimeter-wave (mmWave) technology is promising to address this bottleneck. However, the propagation behaviors at such high frequencies in the harsh industrial environment have yet been well understood. In this work, extensive measurements have been conducted in a representative industrial application scenario using a 2-GHz wideband directional channel sounder in the 28-GHz mmWave band. By exploiting the measurement with excellent resolution, the multipath components’ (MPCs) delay-angular space is transformed onto the scatter points (SPs) in the propagation environment. An effective clustering algorithm is then proposed to cluster the SPs without prior knowledge and iterations. Through a geometrical optics analysis, the SP clusters are classified corresponding to the reflectors. By doing this, the cluster-generating reflectors are reduced to a quasi-deterministic (QD) channel model that ensures spatial consistency and MPCs’ stochastic dispersion. Finally, it is shown that the measurement data agrees well with the proposed QD model, indicating the high fidelity of the proposed model.
Massive multiple-input multiple-output (MIMO) is a profitable technique to greatly boost spectral efficiency, which has been embraced by the fifth-generation (5G) and sixth-generation (6G) mobile communication systems. By exploiting appropriate downlink precoding algorithms, base stations (BSs) equipped with a large number of antennas are able to provide service to multiple users as well as several cells at the same time and frequency. However, the mutual coupling effect due to the compact antenna array gives misleading results in massive MIMO communication systems. In this paper, we focus on the mutual coupling effect for massive MIMO systems with maximal ratio transmission (MRT), zero-forcing (ZF), regularize ZF (RZF), and minimum mean square error (MMSE) precoding to solve the mutual coupling problem. Additionally, we construct the closed-form expressions of the spectral efficiency (SE) to evaluate the effect of mutual coupling on system performance. Simulation results validate the effectiveness of the proposed mutual coupling effect assessment method and demonstrate the significant impacts of mutual coupling on massive MIMO system performance.
In order to meet the demand for higher transmission rates of the future high-speed railway (HSR) wireless communication systems, millimeter wave (mmWave) communication and large-scale antenna arrays (LSAs) become promising technologies. By utilizing hybrid analog and digital beamforming architecture, the base station (BS) equipped with a LSA can form multiple narrow beams to transmit data streams to multiple mobile relays (MRs) equipped with antenna arrays. Usually, when the train is close to BS, the angular resolution between MRs is high. However, due to the straight shape of the track, the channels between different MRs are becoming highly correlated and multi-user interference can be detrimental to the multi-MRs performance when the train is far from the BS. Therefore, in this paper, we decouple the analog and digital domains of the hybrid BF. First, analog BF beams and a predefined codebook were designed considering the geometry of the straight-line shape track in the HSR scenario. Second, an adaptive analog BF selection is adopted to form appropriate beams when the train is far away from BS. Then mutual interference eliminating between MRs can be realized by digital precoding. The numerical results indicate that the proposed scheme can effectively solve the significant performance degradation of the multi-MR system during the train crossing the cell.