Several kinds of acrylic-acid-grafted-starch (starch/AAc) hydrogels were prepared at room temperature (27°C) by applying 5, 10, 15, 20, and 25 kGy of gamma radiation to 15% AAc aqueous solutions containing 5, 7.5, and 15% of starch. With increment of the radiation dose, gel fraction became higher and attained the maximum (96.5%) at 15 kGy, above which the fraction got lowered. On the other hand, the gel fraction monotonically increased with the starch content. Swelling ratios were lower for the starch/AAc hydrogels prepared with higher gamma-ray doses and so with larger starch contents. Significant promotions of the swelling ratios were demonstrated by hydrolysis with NaOH:13632±10%for 15 kGy radiation-dosed [5% starch/15% AAc] hydrogel, while the maximum swelling ratio was ~200% for those without the treatment. The authors further investigated the availability of the starch/AAc hydrogel as an adsorbent recovering dye waste from the industrial effluents by adopting methylene blue as a model material; the hydrogels showed high dye-capturing coefficients which increase with the starch ratio. The optimum dye adsorption was found to be 576 mg per g of the hydrogel having 7.5 starch and 15% AAc composition. Two kinetic models, (i) pseudo-first-order and (ii) pseudo-second-order kinetic models, were applied to test the experimental data. The latter provided the best correlation of the experimental data compared to the pseudo-first-order model.

Functional hydrogels are cutting-edge materials that are important in various fields, such as biomedical engineering, agriculture, pollution control, artificial organs, electronics, and domestic products. They are essential to contemporary scientific and industrial advancements because of their adaptability and versatility. The new synthesis techniques and multidimensional applications of different kinds of hydrogels are the goals of this study. The special qualities of hydrogels are one of the main reasons for their widespread use. Because of their stimulus-responsivity, these materials may alter their properties in response to external environmental signals, including light exposure, pH, and temperature. Their biodegradability and biocompatibility make them appropriate for ecological and medicinal applications, while their intrinsic flexibility guarantees adaptation across many applications. Furthermore, the ability of hydrogels to self-heal and be reused enhances their sustainability and efficiency. The preparation of hydrogels with these unique qualities necessitates exacting preparation methods and cautious raw material selection based on the application. To improve their operation and make sure they satisfy the required performance standards in various sectors, a variety of chemical and physical modifications are used. The functional processes of hydrogels in each sector are thoroughly examined in this review, which offers in-depth information on their interactions, efficacy, and the science underlying their uses. By providing a comprehensive overview, this analysis hopes to provide readers with a solid knowledge of potential hydrogels, empowering them to investigate new avenues for research and optimize their uses across a range of sectors.

Hydrogels made from conductive organic materials have gained significant interest in recent years due to their wide range of uses, such as electrical conductors, freezing resistors, biosensors, actuators, biomedical engineering materials, drug carrier, artificial organs, flexible electronics, battery solar cells, soft robotics, and self-healers. Nevertheless, the insufficient level of effectiveness in electroconductive hydrogels serves as a driving force for researchers to intensify their endeavors in this domain. This article provides a concise overview of the recent advancements in creating self-healing single- or multi-network (double or triple) conductive hydrogels (CHs) using a range of natural and synthetic polymers and monomers. We deliberated on the efficacy, benefits, and drawbacks of several conductive hydrogels. This paper emphasizes the use of natural polymers and innovative 3D printing CHs-based technology to create self-healing conductive gels for flexible electronics. In conclusion, advantages and disadvantages have been noted, and some potential opportunities for self-healing single- or multi-network hydrogels have been proposed.

The objective of the work is to synthesize pectin-N, N-Dimethylacrylamide (DMAA) hydrogel by gamma radiation without using any initiators and cross-linking agents. Effect of radiation doses on gel fraction and equilibrium swelling as a function of pH were studied, and 5 kGy radiation dose was found to be the optimum dose for hydrogel synthesis. The grafting /crosslinking was investigated by Fourier transform infrared spectroscopy. Thermal properties and surface morphology were studied by differential scanning calorimetry and scanning electron microscopy. To study the drug release kinetics, 5-fluorouracil was loaded into the hydrogel and in vitro release was carried out in simulated gastric and intestinal fluid. The release profile of drug showed that more than 90% of the loaded drugs were released after 4 hours at both gastric fluid and intestinal fluid pH. Drug release data was fitted into zero order, Higuchi and Korsmeyer-Peppas kinetic models. Higuchi model was found to be the best fitted and release exponent ‘n’ value of Korsmeyer-Peppas model indicated the non-Fickian transport.