This paper develops an energy analysis for an existing near Zero Energy (nZEB) and Zero Carbon Emissions building called LUCIA, located at the university campus in Valladolid (Spain). It is designed to supply electricity, cooling and heating needs through solar energy (Photovoltaic Systems, PV), biomass and an Earth–Air Heat Exchanger (EAHE), besides a Combined Heat Power (CHP). It is currently among the top three buildings with the highest LEED certification in the World. The building model is simulated with DesignBuilder version 5. The results of the energy analysis illustrate the heating, cooling and lighting consumptions expected, besides other demands and energy uses. From this data, we carried out an energy balance of the nZEB, which will help to plan preventive actions when compared to the actual energy consumptions, improving the management and control of both the building and its systems. The primary energy indicator obtained is 67 kWh/m² a year, and 121 kWh/m² a year for renewable energy generation, with respect to 55 kWh/m² and 45 kWh/m² set as reference in Europe. The Renewable Energy Ratio (RER) is 0.66. These indicators become a useful tool for the energy analysis of the nZEB according to the requirements in the European regulations and for its comparison with further nZEB.

Direct evaporative coolers are energy-efficient, economic solutions to supplying cooling demand for space conditioning. Since their potential strongly depends on air hygrothermal conditions, they are traditionally used in dry and hot climates, though they can be used in many applications and climates. This work proposes a new direct evaporative cooling system with a fabric-based pad. Its design enables maximum wetted surface with minimum pressure drop. Its performance has been experimentally characterized in terms of saturation efficiency, air humidification, pressure drop, and level of particles, based on a full factorial Design of Experiments. Factors studied are air dry bulb temperature, specific humidity, and airflow. Saturation efficiencies obtained for a 25 cm pad are above the values achieved by other alternative evaporative cooling (EC) pads proposed in the literature, with lower pressure drops.