The prevalence of type 2 diabetes (T2D) has been growing worldwide; hence, safe and effective antidiabetics are critically warranted. Recently, imeglimin, a novel tetrahydrotriazene compound, has been approved for use in T2D patients in Japan. It has shown promising glucose-lowering properties by improving pancreatic beta-cell function and peripheral insulin sensitivity. Nevertheless, it has several drawbacks, including suboptimal oral absorption and gastrointestinal (GI) discomfort. Therefore, this study aimed to fabricate a novel formulation of imeglimin loaded into electrospun nanofibers to be delivered through the buccal cavity to overcome the current GI-related adverse events and to provide a convenient route of administration. The fabricated nanofibers were characterized for diameter, drug-loading (DL), disintegration, and drug release profiles. The data demonstrated that the imeglimin nanofibers had a diameter of 361 ± 54 nm and DL of 23.5 ± 0.2 μg/mg of fibers. The X-ray diffraction (XRD) data confirmed the solid dispersion of imeglimin, favoring drug solubility, and release with improved bioavailability. The rate of drug-loaded nanofibers disintegration was recorded at 2 ± 1 s, indicating the rapid disintegration ability of this dosage form and its suitability for buccal delivery, with a complete drug release after 30 min. The findings of this study suggest that the developed imeglimin nanofibers have the potential to be given via the buccal route, thereby achieving optimal therapeutic outcomes and improving patient compliance.

Much attention has been gained on green silver nanoparticles (green-AgNPs) in the medical field due to their remarkable effects against multi-drug resistant (MDR) microorganisms and targeted cancer treatment. In the current study, we demonstrated a simple and environment-friendly (i.e., green) AgNP synthesis utilizing Jacobaea maritima aqueous leaf extract. This leaf is well-known for its medicinal properties and acts as a reducing and stabilizing agent. Nanoparticle preparation with the desired size and shape was controlled by distinct parameters; for instance, temperature, extract concentration of salt, and pH. The characterization of biosynthesized AgNPs was performed by the UV-spectroscopy technique, dynamic light scattering, scanning electron microscopy, X-ray diffraction, and Fourier-transform infrared. The successful formation of AgNPs was confirmed by a surface plasmon resonance at 422 nm using UV-visible spectroscopy and color change observation with a particle size of 37± 10 nm and a zeta potential of −10.9 ± 2.3 mV. SEM further confirmed the spherical size and shape of AgNPs with a size varying from 28 to 52 nm. Antibacterial activity of the AgNPs was confirmed against all Gram-negative and Gram-positive bacterial reference and MDR strains that were used in different inhibitory rates, and the highest effect was on the E-coli reference strain (MIC = 25 μg/mL). The anticancer study of AgNPs exhibited an IC₅₀ of 1.37 μg/mL and 1.98 μg/mL against MCF-7 (breast cancer cells) and A549 (lung cancer cells), respectively. Therefore, this green synthesis of AgNPs could have a potential clinical application, and further in vivo study is required to assess their safety and efficacy.

In this preclinical two-dose mucosal immunization study, using a combination of S1 spike and nucleocapsid proteins with cationic (N3)/or anionic (L3) lipids were investigated using an intranasal delivery route. The study showed that nasal administration of low amounts of antigens/adjuvants induced a primary and secondary immune response in systemic IgG, mIL-5, and IFN-gamma secreting T lymphocytes, as well as humoral IgA in nasal and intestinal mucosal compartments. It is believed that recipients will benefit from receiving a combination of viral antigens in promoting a border immune response against present and evolving contagious viruses. Lipid adjuvants demonstrated an enhanced response in the vaccine effect. This was seen in the significant immunogenicity effect when using the cationic lipid N3. Unlike L3, which showed a recognizable effect when administrated at a slightly higher concentration. Moreover, the findings of the study proved the efficiency of an intranasally mucosal immunization strategy, which can be less painful and more effective in enhancing the respiratory tract immunity against respiratory infectious diseases.

Erectile dysfunction (ED) is a growing health condition that needs safe and effective therapy. One of the main common treatments is sildenafil which is used in clinics for managing erectile dysfunction by enhancing the blood supply to the penis. In the current study, sildenafil was formulated as nanofibers and mixed with the root extract of Glycyrrhiza glabra (glycyrrhizin) as a natural sweetener to be administrated in the buccal cavity for enhanced drug bioavailability, rapid drug absorption and improved patient compliance. The formulated dual-loaded nanofibers were evaluated by measuring diameter, disintegration, drug loading efficiency, drug release profile, and in vitro cell viability assessment. The results showed that the sildenafil/glycyrrhizin-loaded fibers had a diameter of 0.719 ± 0.177 μm and lacked any beads and pores formation on their surfaces. The drug loading and encapsulation efficiency for sildenafil were measured as 52 ± 7 µg/mg and 67 ± 9 %, respectively, while they were 290 ± 32 μg/mg and 94 ± 10 %, respectively, for glycyrrhizin. The release rate of sildenafil and glycyrrhizin demonstrated a burst release in the first minute, followed by a gradual increment until a complete release after 120 min. The in vitro cell viability evaluation exhibited that the application of sildenafil and glycyrrhizin is safe upon 24-hour treatment on human skin fibroblast cells at all used concentrations (i.e., ≤ 1,000 and 4,000 μg/mL, respectively). However, the application of sildenafil-glycyrrhizin combination (in a ratio of 1:4) demonstrated more than 80 % cell viability at concentrations of ≤ 250 and 1000 μg/mL, respectively, following 24-hour cell exposure. Therefore, sildenafil/glycyrrhizin dual-loaded PVP nanofibers showed a potential buccal therapeutic approach for erectile dysfunction management.

Background/Objectives: Children with autism spectrum disorder (ASD) frequently experience poor compliance with oral medication due to bitterness, unpleasant taste, and unsuitable dosage forms such as large tablets or capsules. Risperidone, a widely prescribed antipsychotic for managing ASD symptoms, is particularly challenging in this regard. The present study aimed to develop a novel sucrose-based microfiber drug delivery system to improve the palatability, acceptance, and bioavailability of risperidone in pediatric patients with ASD. Methods: Risperidone was incorporated into sucrose microfibers using centrifugal spinning technology. Fiber morphology was characterized by scanning electron microscopy (SEM). Drug loading (DL), encapsulation efficiency (EE%), and disintegration time were measured. In vitro drug release and cytotoxicity assays were performed using human foreskin fibroblast cells (HFF-1). An in vivo palatability and preference study was conducted in male BALB/c mice to evaluate the acceptability of the formulation compared with a commercial risperidone oral solution. Results: SEM analysis revealed smooth, bead-free, non-porous fibers with uniform morphology and size distribution. The formulation showed a rapid disintegration time of ~3 s, DL of 30 ± 5 µg/mg, and EE% of 60 ± 10%. Approximately 50% of risperidone was released within 15 min. Cytotoxicity testing confirmed that concentrations ≤ 125 µg/mL maintained high cell metabolic activity, indicating biocompatibility. In vivo, the microfiber solution demonstrated a strong preference (93%) compared with the commercial oral solution (30%). Conclusions: Risperidone-loaded sucrose microfibers represent a promising fast-dissolving oral delivery system for children with ASD. This child-friendly formulation improves palatability and compliance while maintaining safety and drug release performance.

Background/Objectives: Skin wounds interrupt the natural anatomy and function of the skin. The body passes through four physiological phases to repair wounds after injury. Since the fibers are more closely related to the extracellular matrix structure, they can be used as scaffolds to accelerate wound closure. Shikonin is a botanical herbal remedy used as an anti-inflammatory agent and for its wound-healing characteristics. Cresols are known for their bactericidal and fungicidal properties, which promote their utilization as a disinfectant in soap. Therefore, this study aimed to formulate shikonin and cresol-loaded nanofibers for a dual wound-healing and antibacterial wound dressing in vitro. Methods: This study demonstrated the effectiveness of the drug-loaded nanofibers against diverse Gram-positive and Gram-negative bacteria using the minimum inhibitory concentration (MIC) and zone of inhibition assays. Results: Scanning electron microscopy images showed successful formulation of shikonin/cresol fibers with an average diameter of 772 ± 152 nm. The encapsulation efficiency and drug loading for the dual drug-loaded fibers were 44 ± 1% and 25 ± 1 µg/mg, respectively, for shikonin, and 38 ± 1% and 21 ± 0.5 µg/mg, respectively, for cresol, with a full release of both drugs achieved after 180 min. The combination of both compounds exhibited a safe concentration of ≤6 µg/mL, with cell viability of >50% in human dermal fibroblasts (HFF-1) after 24 h. The MIC results indicated that the combination was efficient as an antibacterial agent against Gram-positive bacteria at a safe concentration. The shikonin/cresol-loaded fibrous system showed an inhibition zone close to that of the control drugs, suggesting that the drugs have retained their antibacterial activity after electrospinning. Conclusions: This dual drug-loaded fiber system showed a high potential as an antibacterial wound dressing for skin infection injuries. However, in vivo studies are required to assess the safety and efficacy in an animal model of the dual drug-loaded fiber system.