An in-body sensor network is that in which at least one of the sensors is located inside the human body. Such wireless in-body sensors are used mainly in medical applications, collecting and monitoring important parameters for health and disease treatment. IEEE Standard 802.15.6-2012 for wireless body area networks (WBANs) considers in-body communications in the Medical Implant Communications Service (MICS) band. Nevertheless, high-data-rate communications are not feasible at the MICS band because of its narrow occupied bandwidth. In this framework, ultrawideband (UWB) systems have emerged as a potential solution for in-body highdata-rate communications because of their miniaturization capabilities and low power consumption.

Several reports over the last few decades have shown that the dielectric properties of healthy and malignant tissues of the same body organ usually show different values. However, no intensive dielectric studies of human colon tissue have been performed, despite colon cancer’s being one of the most common types of cancer in the world. In order to provide information regarding this matter, a dielectric characterization of healthy and malignant colon tissues is presented. Measurements are performed on ex vivo surgery samples obtained from 20 patients, using an open-ended coaxial probe in the 0.5–18 GHz frequency band. Results show that the dielectric constant of colon cancerous tissue is 8.8% higher than that of healthy tissues ( p = 0.002). Besides, conductivity is about 10.6% higher, but in this case measurements do not have statistical significance ( p = 0.038). Performing an analysis per patient, the differences in dielectric constant between healthy and malignant tissues appear systematically. Particularized results for specific frequencies (500 MHz, 900 MHz, 2.45 GHz, 5 GHz, 8.5 GHz and 15 GHz) are also reported. The findings have potential application in early-stage cancer detection and diagnosis, and can be useful in developing new tools for hyperthermia treatments as well as creating electromagnetic models of healthy and cancerous tissues.

Next Generation Internet of Things (NGIoT) addresses the deployment of complex, novel IoT ecosystems. These ecosystems are related to different technologies and initiatives, such as 5G/6G, AI, cybersecurity, and data science. The interaction with these disciplines requires addressing complex challenges related with the implementation of flexible solutions that mix heterogeneous software and hardware, while providing high levels of customisability and manageability, creating the need for a blueprint reference architecture (RA) independent of particular existing vertical markets (e.g., energy, automotive, or smart cities). Different initiatives have partially dealt with the requirements of the architecture. However, the first complete, consolidated NGIoT RA, covering the hardware and software building blocks, and needed for the advent of NGIoT, has been designed in the ASSIST-IoT project. The ASSIST-IoT RA delivers a layered and modular design that divides the edge-cloud continuum into independent functions and cross-cutting capabilities. This contribution discusses practical aspects of implementation of the proposed architecture within the context of real-world applications. In particular, it is shown how use of cloud-native concepts (microservices and applications, containerisation, and orchestration) applied to the edge-cloud continuum IoT systems results in bringing the ASSIST-IoT concepts to reality. The description of how the design elements can be implemented in practice is presented in the context of an ecosystem, where independent software packages are deployed and run at the selected points in the hardware environment. Both implementation aspects and functionality of selected groups of virtual artefacts (micro-applications called enablers) are described, along with the hardware and software contexts in which they run.

Tissue phantoms are widely used for assessing the interaction between the electromagnetic waves and the human body. These are especially key in body area networks, where the body itself acts as the propagation medium, since transmission is highly influenced by its diverse dielectric properties. Gels are suitable materials because of their high water content, which is required to mimic the dielectric properties of most tissues. In this work, PHEA gels are suggested for achieving those properties due to their synthetic nature, which gives them the possibility to be swollen reversibly in more types of mixtures, in addition to water. These gels can be tailored to control the amount of liquid they embed so that they can imitate different body tissues in a wide bandwidth (2-26.5 GHz), which includes most of the current mobile communication and medical bands. This versatility offers the chance to create heterogeneous models of particular regions of the body, and thus improve the test realism. Besides, they own better mechanical and stability properties than the widely used agar or gelatin.

In the near future, many applications such as environmental sensors, smart objects, health sensors, and personal devices will be connected to mobile networks requiring additional spectrum. Studies have been made to demonstrate a low occupancy time and locations on the digital terrestrial television (DTT) band. This available or unused spectrum have been called “TV-White-Spaces.” In the 2015 World Radiocommunication Conference, the ITU decided to re-allocate the 700 MHz band (694-790 MHz) for International Mobile Telecommunications (IMT) services and also emplaced the discussion of the future use of the DTT band (470-694 MHz) to 2025, for which studies have been requested. In this paper, we study a particular case which goes a step beyond the previous ones, as it aims at sharing the same frequency band in the same area between long term evolution-advance (LTE-A) and digital video broadcasting-terrestrial second generation (DVB-T2) technologies. Those geographical areas that are not covered because the useful DTT signal is obstructed by the environment or it has a limited coverage by the network design can be called “micro-TVWS.” We assume that a DVB-T2 transmitter provides coverage for fixed rooftop reception as a primary service, to a building in which a LTE-A femtocell is installed indoors for local coverage, as a secondary service. The results have been obtained by laboratory emulation and validated through field measurements using professional equipment. Our results provide the technical restrictions of the LTE-A femtocell, mainly on the maximum allowable effective isotropic radiated power that could transmit on the DTT band in terms of carrier separation, from co-channel to adjacent band. These results meet the need of spectrum for IMT-Advanced technologies, so spectrum sharing is proposed in this paper as a new solution to make an efficient use of this resource.