This work demonstrates the feasibility of a polarizer-free, electrically switchable and optically rewritable display based on dye-doped polymer-dispersed liquid crystals (DD-PDLCs). Experimental results indicate that the doped dyes are homeotropically adsorbed onto the polymer film when an appropriate AC voltage is applied during patterning. The adsorbed dyes in the illuminated region then align the liquid crystals homeotropically, and produce a transparent pattern in the scattering background without any polarizer. Notably, the adsorbed dyes can be erased and readsorbed using thermal and optical treatments, respectively. The switching time of the fabricated display is of the order of milliseconds, and the contrast ratio is ~ 30.
This work demonstrates a reflective Fresnel zone plate based on dye-doped cholesteric liquid crystals (DDCLC) using the photo-induced realignment technique. Illumination of a DDCLC film with a laser beam through a Fresnel-zone-plate mask yields a reflective lens with binary-amplitude structures - planar and focal conic textures, which reflect and scatter probed light, respectively. The formed lens persists without any external disturbance, and its focusing efficiency, analyzed using circularly polarized light, is ~ 23.7%, which almost equals the measured diffraction efficiency of the used Fresnel-zone-plate mask (~ 25.6%). The lens is thermally erasable, rewritable and switchable between focusing and defocusing states, upon application of a voltage.
12 April 2016 in ACS Applied Materials & Interfaces
An achromatic linear polarization rotator based on a tandem-2ϕ-twisted nematic liquid crystal cell (tandem-2ϕ-TNLC cell, where 2ϕ represents the total twisted angle) is theoretically analyzed and experimentally demonstrated. The tandem-2ϕ-TNLC cell comprises two conventional ϕ-TNLC cells with the required arrangement that the LC director close to the last layer of the first ϕ-TNLC cell should be perpendicular to that close to the first layer of the second ϕ-TNLC cell. With such a simple combination, the TNLC performances are considerably improved. According to the experimental results and theoretical analyses by Jones Calculus, the tandem-2ϕ-TNLC polarization rotator with suitable parameters is achromatic and insensitive to the polarization plane of incident light. Such properties provide these polarization rotators with potential for practical applications.
This letter demonstrates the feasibility of producing variable liquid crystal (LC) pretilt angles using light-induced ripple structures (LIRSs) in homeotropically aligned azo dye-doped liquid crystals (ADDLCs). Illuminating homeotropically aligned ADDLCs with a linearly polarized light for a suitable period yields the LIRSs which provide LCs an anisotropic homogeneous anchoring force. Experimentally, the effective alignment force produced by the homeotropic alignment layer and the LIRSs determines the LC pretilt angle (24° to 63.5°), defined from the normal to the substrate. A no-bias pi cell for liquid crystal displays is demonstrated using this approach.