Pore size distribution characterization of unconventional tight reservoirs is extremely significant for an optimized extraction of petroleum from such reservoirs. In the present study, mercury injection capillary pressure (MICP) and low-field nuclear magnetic resonance (NMR) are integrated to evaluate the pore size distribution of the Chang 7 tight sandstone reservoir. The results show that the Chang 7 tight sandstones are characterized by high clay mineral content and fine grain size. They feature complex micro-nano-pore network system, mainly composed of regular primary intergranular pores, dissolved pores, inter-crystalline pores, and micro-fractures. Compared to the porosity obtained from MICP, the NMR porosity is closer to the gas-measured porosity (core analysis), and thus can more accurately describe the total pore space of the tight sandstone reservoirs. The pore throat distribution (PTD) from MICP presents a centralized distribution with high amplitude, while the pore size distribution (PSD) derived from NMR shows a unimodal distribution or bimodal distribution with low amplitude. It is notable that the difference between the PSD and the PTD is always related to the pore network composed of large pores connecting with narrow throats. The PSD always coincides very well with the PTD in the very tight non-reservoirs with a much lower porosity and permeability, probably due to the pore geometry that is dominated by the cylindrical pores. However, a significant inconsistency between the PSD and PTD in tight reservoirs of relatively high porosity and low permeability is usually associated with the pore network that is dominated by the sphere-cylindrical pores. Additionally, Euclidean distance between PSD and PTD shows a good positive correlation with pore throat ratio (PTR), further indicating that the greater difference of pore bodies and pore throats, the more obvious differentiation of two distributions. In summary, the MICP and NMR techniques imply the different profiles of pore structure, which has an important implication for deep insight into pore structure and accurate evaluation of petrophysical properties in the tight sandstone reservoir.

During diagenesis, the transformation of unconsolidated sediments into a sandstone is usually accompanied by compaction, water expulsion, cementation and dissolution, which fundamentally control the extent, connectivity and complexity of the pore structure in sandstone. As the pore structure is intimately related to fluid flow in porous media, it is of great importance to characterize the pore structure of a hydrocarbon-bearing sandstone in a comprehensive way. Although conventional petrophysical methods such as mercury injection porosimetry, low-pressure nitrogen or carbon dioxide adsorption are widely used to characterize the pore structure of rocks, these evaluations are based on idealized pore geometry assumptions, and the results lack direct information on the pore geometry, connectivity and tortuosity of pore channels. In view of the problems, X-ray micro-CT was combined with ImageJ software (version 1.8.0) to quantitatively characterize the pore structure of Berea Sandstone. Based on its powerful image processing function, a series of treatments such as contrast enhancement, noise reduction and threshold segmentation, were first carried out on the micro-CT images of the sandstone via ImageJ. Pores with sizes down to 2.25 μm were accurately identified. Geometric parameters such as pore area, perimeter and circularity could thus be extracted from the segmented pores. According to our evaluations, pores identified in this study are mostly in the range of 30–180 μm and can be classified into irregular, high-circularity and slit-shaped pores. An irregular pore is the most abundant type, with an area fraction of 72.74%. The average porosity obtained in the image analysis was 19.10%, which is fairly close to the experimental result determined by a helium pycnometer on the same sample. According to the functional relationship between tortuosity and permeability, the tortuosity values of the pore network were estimated to be in the range of 4–6 to match the laboratory permeability data.

Calcareous sand is a crucial construction material for island and reef development and reinforcing it using Microbially Induced Calcite Precipitation (MICP) technology is a promising new method. This study employed 3D scanning technology to assess changes in the particle size and morphology of MICP-treated, coated calcareous sand particles. Single-particle crushing tests were conducted to analyze their crushing strength, crushing energy, crushing modes, and fragment fractal dimensions. The results indicated that MICP treatment significantly increased particle size, surface area, and volume, while reducing flatness. At a cementation solution concentration of 1 mol/L, both crushing strength and crushing energy were optimized. The coated particles exhibited three crushing modes: explosive crushing, mixed crushing, and splitting crushing. Thicker coatings led to a tendency for particles to break into larger fragments through the mixed and splitting crushing modes. Fractal analysis revealed that coating thickness directly affects the local crushing characteristics of the particles.

With the development of imaging technology, tools to quantitatively describe pore structure, morphology, and connectivity have been widely applied on low permeable rocks; however, it is still questionable to what extent this information can be used to predict permeability. Applicability and comparability of different techniques are discussed here for the Middle Ordovician Cobourg limestone (Canada), a rock dominated by calcite grains of variable sizes (µm–cm) and heterogeneously distributed quartz, dolomite, pyrite, and meshy clay minerals. Absolute porosities determined by helium pycnometry (HP) in literature are approximately 1.6% (±0.9%), and gas permeabilities range from 10⁻²⁰ to 10⁻¹⁹ m². Porosities obtained from BIB-SEM are much smaller compared to those from HP (16–69% of HP). Pores found in clays are smaller, slit-shaped, and more densely spaced when compared to those in calcite minerals. Connectivity between pores could not be resolved with 3D micro-CT or FIB-SEM reconstructions, which have a resolution limit of 8 µm and 10 nm, respectively. However, assuming the pores to be connected, laboratory-derived permeability data could be fitted using a simple capillary bundle model, including information about the visible pore size distributions obtained from BIB-SEM images and a tortuosity range of 8 to 15.

Considering the negative relationship between the production of gas and water, we should minimise water production. The dip angle of hydraulic fracturing can control not only the hydraulic connectivity between the roof and floor aquifers and the coal seam, but also the gas flow direction in the coal seam. Permeability test results show that, under the circumstances of natural fractures and cleats fewer impacts, the permeability of coal samples along the direction of the coal seam is obviously higher than that in the direction perpendicular to the coal seam (accounting for 79.2% of the samples). According to the dip angle of hydraulic fracturing, combined with the thickness of coal seam and the development status of natural fractures and cleats, hydraulic fracturing will be divided into three types: vertical dip angle of fracturing, horizontal dip angle of fracturing and inclined dip angle of fracturing. The optimal fracture dip angle: α = arcsin (H/Lmax). [Received: July 6, 2015; Accepted: June 4, 2016]