Yundong Ji

Dr. Yundong Ji


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 November 2022 in Materials
Verified
Journal Article
Open access
PDF file
XWXiangjiang Wang
Xiangjiang Wang
YWYao Wang
Yao Wang
YJYundong Ji
Yundong Ji
HHHaixiao Hu
Haixiao Hu
DCDongfeng Cao
Dongfeng Cao
SLShuxin Li
Shuxin Li
Thin-ply composite failure modes also significantly differ from conventional ply composite failure modes, with the final failure mechanism switching from irregular progressive failure to direct fracture characterized by a uniform fracture with the reduction of the ply thickness. When open holes and bolt joints are involved, thin-ply-laminated composites exhibit more complex stress states, damage evolution, and failure modes. Compared to the experimental study of thin-ply-laminated composite-bolted joints, there are few reports about numerical analysis. In order to understand the damage evolution and failure mechanism of thin-ply-laminated composites jointed by single-lap bolt, a progressive damage model based on three-dimensional (3D) LaRC failure criterion combined with cohesive element is constructed. Through an energy-based damage evolution method, this model can capture some significant mechanical characteristics in thin-ply-laminated structures, such as the in situ effect, delamination inhibition, and fiber compressive kinking failure. The comparisons between the numerical predictions and experimental observations are made to verify the accuracy of the proposed model. It is found that the predicted stress-displacement curves, failure modes, damage morphologies, etc., are consistent with the experimental results, indicating that the presented progressive damage analysis method displays excellent accuracy. The predicted stress at the onset of delamination is 50% higher than that of the conventional thick materials, which is also consistent with experimental results. Moreover, the numerical model provides evidence that the microstructure of thin-ply-laminated composite performs better in uniformity, which is more conducive to inhibiting the intra-layer damage and the expansion of delamination damage between layers. This study on the damage inhibition mechanism of thin-ply provides a potential analytical tool for evaluating damage tolerance and bearing capabilities in thin-ply-laminated composite-bolted joints.

5 March 2024 in Polymers
Verified
Journal Article
Open access
PDF file
YJYundong Ji
Yundong Ji
XZXinchen Zhang
Xinchen Zhang
CWChangzeng Wang
Changzeng Wang
SLShuxin LI
Shuxin LI
DCDongfeng Cao
Dongfeng Cao
The post-heat mechanical property is one of the important indices for the fire-resistance evaluation of fiber-reinforced polymers. At present, the primary approach to improving the post-heat mechanical property of a material involves incorporating inorganic fillers; yet, the enhancement is limited, and is accompanied by a reduction in room-temperature performance and processability. This study prepares glass-fiber-reinforced composites with elevated mechanical properties after heat through utilizing two variants of epoxy resins modified with polysiloxane, phenolic resin, kaolin, and graphite. In comparison to the phenolic samples, the phenylpropylsiloxane-modified epoxy resulted in a 115% rise in post-heat flexural strength and a 70% increase in the room-temperature flexural strength of phenolic composites. On the other hand, dimethylsiloxane-modified epoxy leads to a 117% improvement in post-heat flexural strength but a 44% decrease in the room-temperature flexural strength of phenolic composites. Macroscopic/microscopic morphologies and a residual structure model of the composites after heat reveal that, during high temperature exposure, the pyrolysis products of polysiloxane promote interactions between carbon elements and fillers, thus preserving more residues and improving the dimensional stability as well as the density of materials. Consequently, a notable enhancement is observed in both the post-heat flexural strength and the mass of carbon residue after the incorporation of polysiloxane and fillers into the materials. The pyrolysis products of polysiloxane-modified epoxy play a vital role in enhancing the post-heat flexural strength by promoting carbon retention, carbon fixation, and interactions with fillers, offering novel pathways for the development of advanced composites with superior fire-resistance properties.

15 February 2021 in Materials
Verified
Journal Article
Open access
PDF file
KZKaidong Zheng
Kaidong Zheng
DCDongfeng Cao
Dongfeng Cao
HHHaixiao Hu
Haixiao Hu
YJYundong Ji
Yundong Ji
SLShuxin LI
Shuxin LI
Compared with standard-ply composites, thin-ply composites exhibit a superior mechanical performance under various operating conditions due to their positive size effects. Thin-ply laminate failure modes, including matrix initial damage (MID), matrix failure (MF), and fiber failure (FF), have been distinguished through a systematic acoustic emission (AE) signals analysis combined with scanning electron microscopy (SEM). First, the characteristic frequencies of various failure modes are identified based on unidirectional laminates ([90] 68 and [0] 68). Then, according to the identified frequencies corresponding to distinctive damage modes, four lay-up sequences (02[[90m/0m]ns]02, m = 1, 2, 4, 8, n × m = 16) with a constant total thickness are designed, and the effects of the number of identical plies in the laminate thickness on the damage evolution characteristics and the damage process under uniaxial tension loads are dynamically monitored. The obtained results indicate that the characteristic frequency ranges for MID, MF, and FF are identified as 0–85 kHz, 165–260 kHz, and 261–304 kHz, respectively. The thickness of identical plies has a significant effect on onset damage. With the decrease of the number of identical plies (i.e., m in the stacking sequences), the thin-ply laminates exhibit the initiation of damage suppression effects and crack propagation resistance.

12 May 2023 in Materials
Verified
Journal Article
Open access
PDF file
HLHao Liu
Hao Liu
HHHaixiao Hu
Haixiao Hu
DCDongfeng Cao
Dongfeng Cao
YJYundong Ji
Yundong Ji
XWXiangjiang Wang
Xiangjiang Wang
SLShuxin Li
Shuxin Li
In filament wound composites, fiber bundles cross each other and form an undulating architecture, which may significantly affect the mechanical behavior of composites. In this study, the tensile mechanical behavior of filament wound laminates was studied experimentally and numerically, and the influences of the bundle thickness and winding angle on the mechanical behavior of the filament wound plates were also explored. In the experiments, tensile tests were carried out on filament wound plates and laminated plates. It was found that, compared to laminated plates, filament wound plates had lower stiffness, greater failure displacement, similar failure loads, and more obvious strain concentration areas. In numerical analysis, mesoscale finite element models, which take into account the fiber bundles’ undulating morphology, were created. The numerical predictions correlated well with the experimental ones. Further numerical studies have shown that the stiffness reduction coefficient of filament wound plates with a winding angle of ±55° decreased from 0.78 to 0.74 as the bundle thickness increased from 0.4 mm to 0.8 mm. The stiffness reduction coefficients of filament wound plates with wound angles of ±15°, ±25°, and ±45° were 0.86, 0.83, and 0.8, respectively.

30 July 2025 in Polymers
Verified
Journal Article
Open access
PDF file
YJYundong Ji
Yundong Ji
军潘军 潘
军 潘
CXchengxin xu
chengxin xu
DCDongfeng Cao
Dongfeng Cao
4,4’-Methylenebis(N,N-diglycidylaniline) (AG80), as a high-performance thermosetting material, holds significant application value due to the enhancement of its strength, toughness, and thermal stability. However, conventional toughening methods often lead to a decrease in material strength, limiting their application. Modification of AG80 epoxy resin was performed using hydroxy-terminated polyphenylpropylsiloxane (Z-6018) and a self-synthesized epoxy compatibilizer (P/E30) to regulate the phase structure of the modified resin, achieving a synergistic enhancement in both strength and toughness. The modified resin was characterized by Fourier transform infrared analysis (FTIR), proton nuclear magnetic resonance (1H NMR) spectroscopy, silicon-29 nuclear magnetic resonance (29Si NMR) spectroscopy, and epoxy value titration. It was found that the phase structure of the modified resin significantly affects mechanical properties. Thus, P/E30 was introduced to regulate the phase structure, achieving enhanced toughness and strength. At 20 wt.% P/E30 addition, the tensile strength, impact strength, and fracture toughness increased by 50.89%, 454.79%, and 152.43%, respectively, compared to AG80. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses indicate that P/E30 regulates the silicon-rich spherical phase and interfacial compatibility, establishing a bicontinuous structure within the spherical phase, which is crucial for excellent mechanical properties. Additionally, the introduction of Z-6018 enhances the thermal stability of the resin.

9 October 2025 in Polymers
Verified
Journal Article
Open access
PDF file
YZYu Zhao
Yu Zhao
Lili WuLili Wu
Lili Wu
玉徐玉娇 徐
玉娇 徐
DCDongfeng Cao
Dongfeng Cao
YJYundong Ji
Yundong Ji
The smoke toxicity of epoxy resin limits the application of its carbon fiber composites in marine interior structures. To address this issue, a novel epoxy resin (EZ) was synthesized by grafting phenyl propyl polysiloxane (PPPS) onto ortho-cresol novolac epoxy resin (EOCN), building upon the group’s earlier work on polysiloxane-modified epoxy resin (EB). The results confirmed successful grafting of PPPS onto EOCN, which significantly enhanced the thermal stability and char residue of EZ. Specifically, the peak heat release rate (PHRR), total heat release (THR), peak smoke production rate (PSPR), and total smoke production (TSP) of EZ were reduced by 68.5%, 35%, 73.1%, and 48.3%, respectively, attributable to the formation of a stable and compact char layer that suppressed smoke generation. By blending EZ with EB resin, a low-smoke epoxy system (LJF-2) was developed for prepreg applications. Carbon fiber composites (LJF-CF) prepared from LJF-2 exhibited minimal smoke emission and a unique bilayer char structure: a dense inner layer that hindered smoke transport and a thick outer layer that provided thermal insulation, delaying further resin decomposition. Silicon was uniformly distributed in the char residue as silicon oxides, improving its stability and compactness. Without adding any flame retardants or smoke suppressants, LJF-CF achieved a maximum smoke density (Ds,max) of 276.9, meeting the requirements of the FTP Code for ship deck materials (Ds,max < 400). These findings indicate that LJF-CF holds great promise for use in marine interior components where low smoke toxicity is critical.