Carbon fiber reinforced plastic (CFRP) is the main material of aircraft skin. Preparing superhydrophobic anti-icing/deicing surface on the CFRP is of great importance for aircraft flight safety. In this work, a variety of multi-scale micro-nano structures were imprinted on CFRP by femtosecond laser processing, and a transition from hydrophilic to superhydrophobic CFRP was realized. After being optimized by different geometries and laser conditions, the water contact angle, which is tested at 24.3 °C and 34% humidity, increased from 88 ± 2° (pristine) to 149 ± 3° (100 μm groove) and 153 ± 3° (80 μm grid). A further anti-icing test at −10 °C (measured on the cooling platform) and 28% humidity showed that the freezing time was increased from 78 ± 10 s (pristine) to 282 ± 25 s (80 μm grid). Most importantly, the tensile tests showed that the femtosecond laser processing method did not deteriorate the mechanical properties of CFRP. This work provides great significance for aircraft passive deicing technology.
The post-heat mechanical property is one of the important indices for the fire-resistance evaluation of fiber-reinforced polymers. At present, the primary approach to improving the post-heat mechanical property of a material involves incorporating inorganic fillers; yet, the enhancement is limited, and is accompanied by a reduction in room-temperature performance and processability. This study prepares glass-fiber-reinforced composites with elevated mechanical properties after heat through utilizing two variants of epoxy resins modified with polysiloxane, phenolic resin, kaolin, and graphite. In comparison to the phenolic samples, the phenylpropylsiloxane-modified epoxy resulted in a 115% rise in post-heat flexural strength and a 70% increase in the room-temperature flexural strength of phenolic composites. On the other hand, dimethylsiloxane-modified epoxy leads to a 117% improvement in post-heat flexural strength but a 44% decrease in the room-temperature flexural strength of phenolic composites. Macroscopic/microscopic morphologies and a residual structure model of the composites after heat reveal that, during high temperature exposure, the pyrolysis products of polysiloxane promote interactions between carbon elements and fillers, thus preserving more residues and improving the dimensional stability as well as the density of materials. Consequently, a notable enhancement is observed in both the post-heat flexural strength and the mass of carbon residue after the incorporation of polysiloxane and fillers into the materials. The pyrolysis products of polysiloxane-modified epoxy play a vital role in enhancing the post-heat flexural strength by promoting carbon retention, carbon fixation, and interactions with fillers, offering novel pathways for the development of advanced composites with superior fire-resistance properties.