Natural cellulose, a sustainable bioresource, is highly abundant in nature. Cellulosic materials, particularly those that explore and employ such materials for industrial use, have recently attracted significant global attention in the field of material science because of the unique properties of cellulose. The hydroxyl groups enable the formation of intra- and inter-molecular hydrogen bonding and the arrangement of cellulose chains in a highly ordered crystalline zone, with the remaining disordered structure referred to as an amorphous region. The crystalline areas of cellulose are well-known as cellulose nanocrystals (CNCs). In the present study, we extracted CNCs from pure cellulose isolated from waste jute fibers by sulfuric acid hydrolysis, followed by characterization. Pure cellulose was isolated from jute fibers by treating with sodium hydroxide (20% w/w) and anthraquinone (0.5%) solution at 170 °C for 2 h, followed by bleaching with chlorine dioxide and hydrogen peroxide solution. CNCs were isolated from pure cellulose by treating with different concentrations (58% to 62%) of sulfuric acid at different time intervals (20 min to 45 min). The FTIR study of the CNCs reveals no peak at 1738 cm⁻¹, which confirms the absence of hemicellulose in the samples. The CNCs obtained after 45 min of acid hydrolysis are rod-shaped, having an average length of 800 ± 100 nm and width of 55 ± 10 nm, with a high crystallinity index (90%). Zeta potential significantly increased due to the attachment of SO₄²⁻ ions on the surface of CNC from −1.0 mV to about −30 mV, with the increment of the reaction time from 20 min to 45 min, which proved the higher stability of CNC suspension. Crystallinity increased from 80% to 90% when the reaction time was increased from 20 to 45 min, respectively, while a crystallite size from 2.705 to 4.56 nm was obtained with an increment of the acid concentration. Acid hydrolysis enhanced crystallinity but attenuated the temperature corresponding to major decomposition (Tmax) at 260 °C and the beginning of degradation (Ti) at 200 °C due to the attachment of SO₄²⁻ ions on the surface, which decreased the thermal stability of CNC. The second degradation at 360 °C indicated the stable crystal structure of CNC. The endothermic peak at 255 °C in the DTA study provided evidence of sulfated nanocrystal decomposition and the recrystallization of cellulose I to cellulose II, the most stable structure among the other four celluloses. The proposed easy-to-reproduce method can successfully and efficiently produce CNCs from waste jute fibers in a straightforward way.

Background: The Oxford–AstraZeneca vaccine (Covishield) was the first to be introduced in Bangladesh to fight the ongoing global COVID-19 pandemic. As this vaccine had shown some side-effects in its clinical trial, we aimed to conduct a study assessing short-term adverse events following immunization (AEFIs) in Bangladesh. Method: A cross-sectional study was conducted on social and electronic media platforms by delivering an online questionnaire among people who had taken at least one dose of the COVID-19 vaccine. The collected data were then analysed to evaluate various parameters related to the AEFIs of the respondents. Results: A total of 626 responses were collected. Of these, 623 were selected based on complete answers and used for the analysis. Most of the respondents were between 30–60 years of age, and 40.4% were female. We found that a total of 8.5% of the total respondents had been infected with the SARS-CoV-2 virus. Our survey revealed that out of 623 volunteers, 317 reported various side-effects after taking the vaccine, which is about 50.88% of the total participants. The majority of participants (37.07%, 231/623) reported swelling and pain at the injection site and fever (25.84%, 162/623); these were some of the common localized and generalized symptoms after the COVID-19 vaccine administration. Conclusion: The side-effects reported after receiving the Oxford–AstraZeneca vaccine (Covishield) are similar to those reported in clinical trials, demonstrating that the vaccines have a safe therapeutic window. Moreover, further research is needed to determine the efficacy of existing vaccines in preventing SARS-CoV-2 infections or after-infection hospitalization.

The most affordable type of tablet is the immediately compressible tablet, which uses microcrystalline cellulose (MCC), a popular pharmaceutical excipient, as a filler or binder. To make it compatible with different active drugs and excipients, we tried to change some physical properties of the MCC. In the current study, we used a chelating agent to pretreat the waste cotton before pulping, bleaching, and finally, hydrochloric acid degradation with a concentration of 2N at 100 °C temperature for 20 min to prepare MCC. The prepared MCC was treated with different concentrations of sodium hydroxide at room temperature or at −20 °C followed by precipitation with hydrochloric acid or ethanol with complete washing with distilled water till neutralization. Evaluation of the degree of polymerization (DP) and FT-IR spectrum confirm the identity of the microcrystalline cellulose. The DP was found to be 216. The bulk density of the unmodified MCC was 0.21 while that of modified MCC varied from 0.253 to 0.594. The modified MCC powder showed good flow properties compared to the unmodified MCC as evaluated by the Hausner index, Carr’s index and the angle of repose. The scanning electron microscopy (SEM) of the MCC revealed that the rod shape has been changed to an oval shape due to treatment with sodium hydroxide at −20 °C. The X-ray crystallographic (XRD) analysis indicated that the unmodified MCC and standard MCC showed the crystallinity index (CrI) value of 86.82% and 87.63%, respectively, while the value ranges from 80.18% to 60.7% among the modified MCC powder. The differences in properties of the MCC might be due to the variation of rearrangement of the cellulose chain among the MCC particles due to treatment with different concentrations of a base at different temperatures and precipitation environments. This has enabled us to prepare MCC with different properties which might be compatible with different drugs.

This study explored the great potential of endophytic fungi associated with red seaweed Gracilaria sp. and brown seaweed Sargassum sp. of the Bay of Bengal, Bangladesh, for the first time. Endophytic fungi were identified taxonomically by morphological features and molecular characterisation (ITS sequence). The identification of six fungal isolates revealed five different fungal species belonging to four genera, namely, Aspergillus subversicolor, A. terreus and Cladosporium halotolerans isolated from Gracilaria sp. and Chaetomium globosum, A. terreus and Curvularia perotidis isolated from Sargassum sp. The ethyl acetate extracts of fungal endophytes were evaluated for antimicrobial activity, DPPH radical scavenging activity, and brine shrimp lethality bioassay. Amongst all the fungal extracts evaluated in this study, four showed mild to moderate inhibitory activity (10–14 mm) against the tested bacterial strains. Exceptionally, Chaetomium globosum exerted significant antibacterial activity with the highest zone of inhibition (21 ± 0.3 mm) against the Gram-negative bacterial strain Pseudomonas aeruginosa and also showed moderate antifungal activity (13 ± 0.9 mm) against A. niger. Sargassum sp.-derived A. terreus exhibited the strongest DPPH radical scavenging activity (IC₅₀ value of 7.88 ± 0.09 µg/mL). All the fungal extracts have significant lethality against brine shrimp nauplii (LC₅₀ value of ≤ 20.39 ± 4.04 µg/mL), while Curvularia perotidis and Cladosporium halotolerans were the most effective (LC₅₀ values of 9.30 ± 2.96 µg/mL and 9.94 ± 3.49 µg/mL, respectively). Gas chromatography-mass spectrometry (GC-MS) analysis of the crude extracts identified the presence of several chemical compounds. These bioactive chemical constituents might contribute to the exhibited bioactivity in this study. The current study’s findings support the beneficial impacts of the fungal endophytes on exerting biological activities and consequently as valuable resources of bioactive compounds.

Background: The Sinovac and BioNTech vaccines were the first to be introduced in Türkiye to fight the ongoing global COVID-19 pandemic. As these vaccines had shown some side-effects in its clinical trial, we aimed to conduct a survey study to assess the short-term adverse events following immunization (AEFIs) in Türkiye. Method: A cross-sectional study was conducted using social and electronic media platforms by delivering a pre-formed and validated online questionnaire among people who had received at least one dose of the COVID-19 vaccine. This survey study focused on mass populations from different regions in Türkiye. A total of 603 responses were collected. Among these, 602 were selected based on complete answers and used for the assessment. The collected data were then analyzed to evaluate the various parameters related to the AEFIs of the respondents. Results: Among the total 602 participants, 20.8% were male, and 78.7% were female, actively answering all of the constructive questions. Most of the respondents were between 18–30 years of age. We found that a total of 23.3% of the total respondents had been infected with the SARS-CoV-2 virus. Our survey revealed that out of 602 volunteers, the rate of experiencing physical discomfort was higher in participants who had received the Pfizer-BioNTech vaccine at all three doses than in those who had received the Sinovac vaccine. When all vaccine types were examined, the most common side effect was pain at the injection site, reported by 75.19% participants. When the side effects were compared according to vaccine types, there was a significant difference only in terms of fever. Fever rates in those who had received the Pfizer-BioNTech vaccine (20.96%) were found to be significantly higher than those who had received the Sinovac vaccine (8%). Conclusions: The studied vaccines showed minor side effects and there was no significant difference between the vaccines in terms of other side effects. Moreover, further research is needed to determine the efficacy of the existing vaccines in preventing SARS-CoV-2 infections or after-infection hospitalization.