In this paper, the validation of the hybrid frequency–time domain method for the assessment of hard chine displacement hull from vertical motions is presented. Excitation and hydrodynamic coefficients in regular waves are obtained from the 3D panel method by Hydrostar^® software, while coupled heave and pitch motions are calculated in the time domain by applying the Cummins equations. Experiments using a 1:15 scale model of a “low-drag” small craft are performed in irregular head and following waves at Froude numbers Fr: 0.2, 0.4, and 0.6 at University of Naples Federico II, Italy. Results obtained by hybrid frequency–time domain simulations for heave, pitch, and vertical accelerations at center of gravity and bow are compared with experimental data and showed high accuracy.

The importance of comfort during transfer and stationing becomes a key performance parameter for large yacht design, on the same level as propulsive issues. Such a matter extends questions in terms of form and service demand to the motion behaviour of the unit in waves. Relevant studies refer to outdated hull forms not specific to modern large yachts. In this study, five hull forms with different bow concepts represent the most common design solutions for yachts at constant draught and displacement. The preliminary ranking on the effect of alternative bows on comfort requires the definition of internationally accepted comfort standards. Here, the AWI 22834 guidelines for large yachts provide the service and environmental conditions and criteria for the comfort analysis, being the only reference specific to yachts. The calculations employ a strip-theory-based numerical model to provide results of easy understanding for designers during the early design stage. The obtained ranking among the design solutions on a reference large yacht favours the option nested with a bulb, contradicting the expectations in favour of a vertical bow concept. The discussion and conclusions provide a way forward for additional analyses and investigations aimed at proposing suitable multicriterial design guidelines for large yachts. However, the results also show the unsuitability of AWI environmental and encounter conditions for hull form ranking.