In the nuclear reactor system, the bottom nozzle of fuel assemblies is designed to filter debris and homogenize the flow field to avoid fuel failure due to debris wear. This study aims to determine the flow characteristics around the bottom nozzle and verify the filtering ability. Thus, relevant research is necessary to decide how debris type and bottom nozzle construction affect the flow and filtration behavior of the bottom nozzle. This study built a filtration analysis technique by establishing a visualization test facility and developing a numerical method by coupling computational fluid dynamics and the discrete element method. Three different bottom nozzles' filtration and flow characteristics were analyzed for various debris sizes and shapes. The results show that the increased geometric complexity of the bottom nozzle and debris improves filtration efficiency. According to the analysis, strip debris tends to travel parallel to the flow direction in the flow field, which weakens the filtration capability. For each bottom nozzle, debris blockage and stuckness in a small range have no significant impact on the pressure drop due to the flow distribution function of the bottom nozzle. The analysis technique and results of this study can provide a reference for the design of the filter.
Flow-induced vibrations pose significant risks to the long-term operation of the helical coil steam generator (HCSG). Developing effective mitigating measures heavily relies on clearly understanding the internal turbulent flow. This study investigates helium flow within a 30-degree central region of heat transfer assemblies in the HCSG of the high-temperature gas-cooled reactor utilizing the shear stress transport based on improved delayed detached eddy simulation. The complex vortex structures are effectively captured in the tube bundle, accompanied by a pressure drop of approximately 6.28 kPa. A non-uniform flow distribution influenced by frictional resistance is observed. According to power spectral densities, symmetric annular channels demonstrate similar fluctuation characteristics. A specific flow pattern with a smaller dominant frequency of 2.5 Hz is revealed, which conditionally stabilizes in internal channels L2 and L3 only after passing through the 10–20 rows of tubes and not being suppressed by the effects of shell walls in side channels. This observation offers valuable insights into the optimal scale selection of computational domains for macroscale applications on HCSG. Based on the wavelet spectrum, high-frequency turbulent structures persisting throughout the tube bundle region originate from detached vortices, while low-frequency turbulent structures result from periodic transverse flows triggered by vortex interactions, which may induce resonance in large-scale components and pose potential risks to the structural integrity.
19 December 2023 in Nuclear Engineering and Design