In this paper, a specially designed guided wave radar device for measuring the liquid level in the nuclear industry is proposed. A split-type design is introduced to adapt to a strong radiation environment. An L-band frequency modulated interrupted continuous wave (FMICW) radar is designed to ensure the signal-to-noise ratio of echo signal after long-distance signal transmission, which provides the isolation between transmitter and receiver of more than 60 dB using the gating technology. To overcome the shortcomings of limited installation and maintenance space, a novel coaxial waveguide probe with a multi-segmental structure is proposed and simulated. An adaptive signal processing algorithm is developed to remove false echoes and eliminate measurement fluctuations. A prototype of the proposed measurement system is fabricated and evaluated. Static and dynamic liquid level experiments are performed in an outdoor environment to assess performance and verify the effectiveness of the proposed radar. The results show that the standard deviation measurement error of the proposed radar is within 0.4 cm. The proposed system is expected to have a high potential for applications in liquid level measurement under complex conditions.
Fast factorized back-projection (FFBP) is a classical fast time-domain technique that has garnered significant success in spotlight synthetic aperture radar (SAR) signal processing. The algorithm’s efficiency has been extended to stripmap SAR through integral aperture determination and full-aperture data block processing while retaining its computational efficiency. However, the above method is only operated in the azimuth direction, and the computing efficiency needs to be urgently improved in the actual processing process. This paper proposes a fast factorized back-projection algorithm for stripmap SAR imaging based on range block division. The echo data are divided into multiple subblocks in the range direction, and FFBP processing is applied separately to each full-aperture subblock, further enhancing computational efficiency. The paper analyzes the algorithm’s principles, underscores the necessity of integral aperture determination and full-aperture data block processing, provides specific implementation steps, and applies the algorithm to point target simulation and experimental data from a vehicle-mounted ice radar. The experiments validate the algorithm’s efficiency in stripmap SAR imaging.
Chang’E-7 will be launched around 2026 to explore resources at the lunar south pole. Glaciers are suitable scenes on the earth for lunar penetrating radar verification. In the verification experiment, ice-penetrating signals are inevitably polluted by noise, affecting the accuracy and reliability of glacier detection. This paper proposes a denoising method for ice-penetrating signals based on the combination of whale optimization algorithm (WOA), variational mode decomposition (VMD), and the improved Bhattacharyya distance (BD). Firstly, a fitness function for WOA is established based on permutation entropy (PE), and the number of decomposition modes K and the quadratic penalty factor in the VMD are optimized using WOA. Then, VMD is performed on the signal to obtain multiple intrinsic mode functions (IMFs). Finally, according to the BD, the relevant IMFs are selected for signal reconstruction and denoising. The simulation results indicate the strengths of this method in enhancing the signal-to-noise ratio (SNR), and its performance is better than empirical mode decomposition (EMD). Experiments on the detected signals of the Mengke Glacier No. 29 indicate that the WOA-VMD-BD method can efficiently eliminate noise from the data and procure well-defined layered profiles of the glacier. The research in this paper helps observe the layered details of the lunar regolith profile and interpret the data in subsequent space exploration missions.
To address the degradation in he ranging accuracy of phase-sensitive radar systems caused by RF front-end group delay mismatch, this paper establishes a nonlinear group delay interference model. Using Monte Carlo simulations, we derive the group delay constraints required to achieve millimeter-level ranging accuracy, and, based on these constraints, we propose a novel negative group delay circuit (NGDC). The proposed NGDC attains a figure of merit (FoM) of 0.063, outperforming related designs while offering low insertion loss and high tuning flexibility. After cascading the NGDC, the group delay of a 200–400 MHz bandpass filter (BPF) was improved from ns to ns. When incorporated into the radar system, the NGDC reduces the root mean square (RMS) ranging error from 17.17 mm to 9.25 mm at dB, approaching the theoretical limit of 5.07 mm. These results demonstrate that the proposed hardware provides effective support for high-precision phase linearization in radar systems and offers substantial engineering value.
1 October 2017 in International Journal of Radiation Oncology, Biology, Physics
Electron therapy offers distinct advantages for the treatment of superficial tumors although dosimetry can be difficult to precisely control without custom compensating devices. Previously the manufacture of such devices utilized resource intensive processes such as CNC (computer-numerical-control) machining or resulted in hard plastic compensators that are unacceptable for many clinical situations such as placement of the compensator on complex surfaces with skin defects. To overcome these problems we developed a dosimetric-driven platform to construct patient-specific 3D soft compensators out of cast silicone to enable modulated electron radiotherapy.
14 July 2025 in IEEE Transactions on Geoscience and Remote Sensing
This article analyzes the composition and characteristics of echo signals in a pseudo-random-coded ground -penetrating radar (GPR). Based on these characteristics, an innovative low-rank sparse matrix decomposition (LRSD) method is developed using equivalent matrix gamma norm (EMGN) and equivalent minimax-concave penalty (EMCP) to suppress clutter in the echo signals. The proposed method employs non-convex alternatives to the matrix rank and sparsity functions. Therefore, it can alleviate biased estimates of the matrix rank and sparsity of the pseudo-random-coded radar’s received signals. The proposed method is verified by simulations and experiments on a real dataset. The results demonstrate that the proposed method can achieve better performance in terms of signal-to-clutter ratio (SCR) than the robust nonnegative matrix factorization (RNMF), and robust principal component analysis (RPCA) methods.