The shortage of conventional supplementary cementitious materials opens up the prospect for broader utilization of nontraditional and natural pozzolans (NNPs). The NNPs used in the study included three calcined clays, three volcanic ashes (also referred to as natural pozzolans), three ground bottom ashes, and two fluidized bed combustion ashes. The study focused on assessment of the performance of these NNPs in portland cement systems by evaluating the following parameters: (a) development of the heat of reaction in cement pastes containing 25, 30, and 35 % of NNPs by weight of cement (bwoc) by means of isothermal calorimetry; (b) measurement of the consumption of calcium hydroxide (CH) in cement pastes containing 0, 25, 30, 35, 40, and 45 % (bwoc) of NNPs after 7, 28, and 56 days of curing using thermogravimetric analysis technique; (c) determination and quantification of the reaction products by quantitative x-ray diffraction in cement pastes containing 0 and 25 % (bwoc) of NNPs after 7, 28, and 56 days of curing; and (d) measurement of the 7- and 28-day compressive strength of mortar cubes. In all cases, the cumulative heat values of pastes containing NNPs were higher than those of reference pastes containing inert fillers, confirming that all NNPs were undergoing pozzolanic reaction. For most of the NNPs, the highest amount of CH consumed was observed in systems with 35 % replacement level. The early-age CH consumption correlated well with the content of alumina in NNPs whereas the later-age data correlated better with the silica content of the NNPs. In terms of compressive strength development, the highest early-age values were observed in mortars containing calcined clays, whereas other NNPs contributed to strength development at latter ages.
This paper presents the results of a study on the evaluation of resistance of pastes from carbonated, low-lime calcium silica cements to external sulfate attack. The extent of chemical interaction between sulfate solutions and paste powders was assessed by quantifying the amount of species that leached out from carbonated pastes using ICP-OES and IC techniques. In addition, the loss of carbonates from the carbonated pastes exposed to sulfate solutions and the corresponding amounts of gypsum formed were also monitored by using the TGA and QXRD techniques. The changes in the structure of silica gels were evaluated using FTIR analysis. The results of this study revealed that the level of resistance of carbonated, low-lime calcium silicates to external sulfate attack was affected by the degree of crystallinity of calcium carbonate, the type of calcium silicate, and the type of cation present in the sulfate solution.
This paper focuses on the evaluation of sulfate resistance in carbonated pastes prepared from low-lime calcium silicates (CCS). The chemical interaction between the sulfate solution and paste powders was assessed by monitoring the leaching of the Ca and Si species, reduction in the content of carbonates and formation of gypsum. The analytical techniques used in the study included TGA, ICP-OES and IC. The results of the study revealed that the level of the resistance to the chemical effect of the sulfates depends on the type of the calcium silicate, degree of crystallinity of calcium carbonate, and the type of cation present in the sulfate solution.
Laboratory investigations and results from a year-long field trial demonstrated that plain Type IL cement and slag cement concrete that was internally cured by superabsorbent polymer (SAP) has increased strength and durability compared to SAP-free mixtures, mixtures containing colloidal nanosilica, and mixtures that were externally cured with a surface-applied curing compound. SAP was successfully delivered to fresh concrete mixtures at the ready-mixed concrete plant by using dissolvable bags containing premeasured amounts of dry SAP particles. No batching adjustments were necessary to successfully utilize SAP in the concrete mixtures
This manuscript describes the results of the first round-robin test (RRT) of the American Association of State Highway and Transportation Officials TP 144-23 (Turner-Fairbank Highway Research Center Alkali-Silica Reaction Susceptibility Test [T-FAST]). The RRT participants analyzed six samples in the forms of four coarse and two fine aggregates of varying alkali―silica susceptibility. Fifteen datasets were received and screened based on quality and statistical criteria. The single-operator and multilaboratory coefficients of variation (CVs) were calculated based on the six datasets that passed the initial screening phase. The results showed significant variability in the multilaboratory CVs. Different aspects of T-FAST and the analytical method were identified as the main sources of variability. Despite the significant CV, the elemental concentration results and the T-FAST classification the participants reported captured the alkali-silica susceptibility of all the samples.
17 November 2025 in Transportation Research Record: Journal of the Transportation Research Board
One of the sustainable strategies for enhancing the durability and service life of concrete infrastructure is to improve the quality of the microstructure through internal curing. This can be achieved by the use of superabsorbent polymers (SAPs), which act as internal water reservoirs within the concrete. As cement hydrates, these reservoirs release additional water, enhancing the degree of hydration, refining the microstructure, and ultimately improving the overall performance of the concrete. This research investigates the effects of SAPs and nanosilica (NS) admixtures on plain and slag cement mortars by evaluating hydration kinetics, workability, water absorption, strength properties, drying shrinkage, and microstructural quality and integrity using the ultrasonic pulse velocity (UPV) method. The SAP-modified mortars exhibited enhanced performance attributed to improved hydration resulting from internal curing, especially when compared with mixtures without SAP. Results show that, relative to reference mixtures, mortars with SAP developed higher strength, attained higher UPV values, and demonstrated lower water absorption and drying shrinkage. These findings suggest a refinement and densification of the microstructure resulting from improved hydration. In plain and slag cement mortars, the addition of NS admixtures alone increased water absorption and drying shrinkage while reducing UPV and strength values. However, in some cases, the combination of colloidal NS with SAP improved performance, suggesting potential synergistic effects between these two additives.