Natural fibers such as Banana fiber and sugarcane bagasse powder are used in the present study, which are abundantly available at low cost. Novel hybrid natural fiber reinforced composite specimen prepared by using the matrix material as epoxy (70%) with the addition of hardener and the reinforcement material (30%) used as NaOH chemical treated banana fiber with the addition of filler material as sugarcane bagasse powder to enhance the property. To prepare the composite material hand-lay process is used and manufactured three different combination of specimen by varying the composition ration of 10%, 15%, and 20% of reinforced material. The mechanical properties such as tensile, compression, flexural, Impact test of the prepared specimen have been evaluated as per the ASTM standards. The mechanical properties results depicts that the specimen prepared with chemically treated fiber gives more strength as compared to untreated fiber composites. The morphological study evidences the proper fiber used while preparing the hybrid composite material. The maximum tensile strength achieved in specimen is 73.48 MPa, compressive strength of 99.63 MPa, flexural strength of 77.50 MPa, Impact strength of 4.8 J/mm, Vickers hardness value of 59.6. The specimen prepared with chemically treated specimen has a higher percentage of water absorption than the untreated. This novel hybrid composite material can be used in automobile, aircraft, building, sports, and household applications.
25 July 2023 in Journal of Alloys and Metallurgical Systems
The automotive sector wants lighter, recyclable, degradable, and sustainable composite materials. In the last few decades, natural fiber composite has been used in a wide range. The natural plant-based fibers are reinforced into polymeric composite materials, giving significant mechanical properties compared to conventional material. This work selects flax and sisal fibers due to higher strength and Young’s modulus. Mechanical behavior such as tensile, flexural, and impact strength are evaluated. Mechanical behavior results are considered in the simulation to determine the performance of an automotive bumper beam. The tensile strength of the flax composite is 90% higher than that of the sisal composite. Flexural strength is 17% higher in a flax composite, whereas energy absorption is nearly identical in a flax and sisal composite. The flax composite has a maximum 204.9 MPa tensile strength, 157.98 MPa flexural strength, and 45 J energy absorption. The mechanical behavior results are validated with simulation results in the ANSYS workbench for static analysis. The results indicate that the flax fiber reinforced composite with 43:57 of a flax-matrix ratio performs better as it can be used as a structural material. A morphological study shows the uniform distribution of matrix material and fiber orientation.