Paolo Maxia

Dr. Paolo Maxia

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 July 2014 in International Journal of Antennas and Propagation
Verified
Journal Article
Open access
PDF file
Giovanni Andrea CasulaGiovanni Andrea Casula
Giovanni Andrea Casula
Paolo MaxiaPaolo Maxia
Paolo Maxia
A multiband printed Log-periodic dipole array (LPDA) antenna for wireless communications is presented. The antenna has been designed starting from Carrel’s theory, optimized using CST Microwave Studio 2012, and then realized. The comparison between simulated and measured results shows that the proposed antenna can be used for wireless communications both in the S (2.4–3 GHz) and in the C (5.2–5.8 GHz) frequency bands, with very good input matching and a satisfactory end-fire radiation pattern. Moreover, it has a compact size, is very easy to realize, and presents an excellent out-of-band rejection, without the use of stop-band filters, thus avoiding interference out of its operating frequency band.

3 October 2016 in International Journal of Antennas and Propagation
Verified
Journal Article
Open access
PDF file
Giovanni Andrea CasulaGiovanni Andrea Casula
Giovanni Andrea Casula
Paolo MaxiaPaolo Maxia
Paolo Maxia
GMGiorgio Montisci
Giorgio Montisci
GVGiuseppe Valente
Giuseppe Valente
GMGiuseppe Mazzarella
Giuseppe Mazzarella
Tonino PisanuTonino Pisanu
Tonino Pisanu
A multiband printed microstrip antenna for wireless communications is presented. The antenna is fed by a proximity-coupled microstrip line, and it is printed on a flexible substrate. The antenna has been designed using a general-purpose 3D computer-aided design software (CAD), CST Microwave Studio, and then realized. The comparison between simulated and measured results shows that the proposed antenna can be used for wireless communications for WLAN systems, covering both the WLAN S-band (2.45 GHz) and C-band (5.2 GHz), and the Wi-Max 3.5 GHz band, with satisfactory input matching and broadside radiation pattern. Moreover, it has a compact size, is very easy to realize, and presents a discrete out-of-band rejection, without requiring the use of stop-band filters. The proposed structure can be used also as a conformal antenna, and its frequency response and radiated field are satisfactory for curvatures up to 65°.

24 February 2024 in Sensors
Verified
Journal Article
Open access
PDF file
Giovanni Andrea CasulaGiovanni Andrea Casula
Giovanni Andrea Casula
Giacomo MuntoniGiacomo Muntoni
Giacomo Muntoni
Paolo MaxiaPaolo Maxia
Paolo Maxia
GMGiorgio Montisci
Giorgio Montisci
A platform-tolerant RFID (Radio-Frequency Identification) tag is presented, designed to operate across the entire RFID band. This tag utilizes a small Artificial Magnetic Conductor (AMC) structure as a shielding element for an ungrounded RFID tag antenna. It can be easily mounted on various surfaces, including low permittivity dielectric materials, metal objects, or even attached to the human body for wearable applications. The key features of this RFID tag include its ability to be tuned within the worldwide RFID band, achieving a maximum theoretical read range of over 11 m. Despite its advanced capabilities, the design emphasizes simplicity and cost-effective manufacturing. The design and simulations were conducted using CST Studio Suite.

19 February 2025 in Electronics
Verified
Journal Article
Open access
PDF file
Paolo MaxiaPaolo Maxia
Paolo Maxia
Giovanni Andrea CasulaGiovanni Andrea Casula
Giovanni Andrea Casula
Alessandro NavarriniAlessandro Navarrini
Alessandro Navarrini
Tonino PisanuTonino Pisanu
Tonino Pisanu
GVGiuseppe Valente
Giuseppe Valente
GMGiorgio Montisci
Giorgio Montisci
High-sensitivity and large-scale surveys are essential in advancing radio astronomy, enabling detailed exploration of the universe. A Phased Array Feed (PAF) installed in the focal plane of a radio telescope significantly enhances mapping efficiency by increasing the instantaneous Field of View (FoV) and improving sky sampling capabilities. This paper presents the design and optimization of a novel C-Band Phased Array Feed antenna for the Sardinia Radio Telescope (SRT). The system features an 8 × 8 array of dual-polarized elements optimized to achieve a uniform beam pattern and an edge taper of approximately 5 dB for single radiating elements within the 3.0–7.7 GHz frequency range. The proposed antenna addresses key efficiency limitations identified in the PHAROS 2 (PHased Arrays for Reflector Observing Systems) system, including the under-illumination of the Sardinia Radio Telescope’s primary mirror caused by narrow sub-array radiation patterns. By expanding the operational bandwidth and refining the radiation characteristics, this new design enables significantly improved performance across the broader frequency range of 3.0–7.7 GHz, enhancing the telescope’s capability for wide-field, high-resolution observations.

5 June 2025 in Electronics
Verified
Journal Article
Open access
PDF file
Tonino PisanuTonino Pisanu
Tonino Pisanu
Paolo MaxiaPaolo Maxia
Paolo Maxia
ANAlessandro Navarrini
Alessandro Navarrini
GVGiuseppe Valente
Giuseppe Valente
RNRenzo Nesti
Renzo Nesti
ASAldo Sonnini
Aldo Sonnini
The S-band (i.e., 2–4 GHz) is essential in multiple fields of radio astronomy, ranging from pulsar and solar studies to investigations of the early universe. The Italian 64 m fully steerable Sardinia Radio Telescope (SRT) is a system designed to operate in a wide frequency band ranging from 300 MHz to 116 GHz. Recently, the Astronomical Observatory of Cagliari (OAC) has been developing a new cryogenic seven-beam S-band radio receiver. This paper describes the design, fabrication and electromagnetic characterization of the feed horn for this new receiver. It has been designed to observe the sky in the 3–4.5 GHz frequency range and it will be composed of seven feed horns arranged in a regular hexagonal layout with a central element. The feed horns are optimized for placement in the primary focus and consequently illuminate the 64 m primary mirror of the SRT. The electromagnetic characterization of the single feed horn is crucial to verify the receiver’s performance; for this reason, a single feed horn has been manufactured to compare the measured reflection coefficient and the radiated far-field diagram with the results of the electromagnetic simulations, performed using the CST® Suite Studio 2024 and Ansys HFSS® Electromagnetics Suite 2021 R1 (To make the S-parameters and the radiation diagram measurement procedure feasible, the single feed horn has been connected to two adapters: a circular-to-rectangular waveguide adapter and a coax-to-rectangular waveguide adapter. The results of the measurements performed in the anechoic chamber are in very good agreement with the simulated results. Additionally, the feed horn phase center position is evaluated, merging the measurements and simulations results for an optimal installation on the primary focus of the SRT.

6 March 2025 in IEEE Journal of Radio Frequency Identification
Verified
Journal Article
Closed access
Giovanni Andrea CasulaGiovanni Andrea Casula
Giovanni Andrea Casula
AMAntonello Mascia
Antonello Mascia
EMEnrico Mattana
Enrico Mattana
Giacomo MuntoniGiacomo Muntoni
Giacomo Muntoni
Giuseppe SforazziniGiuseppe Sforazzini
Giuseppe Sforazzini
GMGiorgio Montisci
Giorgio Montisci
This paper explores the integration of Poly(3,4)-ethylenedioxythiophene (PEDOT), a conductive polymer, into high-frequency (HF) RFID tags for real-time sensing applications. By modeling PEDOT as a material with variable conductivity, the study investigates three deposition strategies: partial replacement of metallic traces, selective application to specific regions, and full tag coating. The impact of PEDOT molecular organization and deposition technique on sensor performance is analyzed to optimize functionality. The proposed sensor is cost-effective, scalable, and fully compatible with existing 13.56 MHz RFID infrastructure. Experimental evaluations and numerical simulations confirm its ability to precisely modulate the tag frequency response based on environmental stimuli. Key applications include logistics, healthcare, IoT systems, and environmental monitoring, enabling advanced tracking, temperature integrity control, and sustainability. Building on preliminary simulations, this work advances to rigorous experimental validation, demonstrating the potential of organic semiconductor-based RFID sensors as a transformative solution for high-sensitivity, real-time monitoring in industrial and commercial settings.