Abstract:  Puree prepared from over‐ripe peeled bananas was used as raw material for films processing in a laboratory padder. Pectin and glycerol as plasticizer were added in small concentrations and chitosan nanoparticles (88.79 ± 0.42 nm medium size) incorporated at 0.2% (dry weight basis) as reinforcement material. The mechanical properties, water vapor transmission, thermal stability, and scanning electron microscopy of fractured film surfaces were characterized. Both pectin and glycerol demonstrated an important role in promoting elongation and film handability as was expected. The incorporation of nanoparticles promoted noticeable improvement of the mechanical properties and acted in reducing the water vapor permeation rate, by 21% for films processed with pectin and up to 38% for films processed without pectin, when compared to the control (puree films with no pectin and nanoparticles additions). Microscopic observation revealed a denser matrix when nanoparticles are incorporated into the films. Practical Application:  The development of films from fruit purees head to a new strategy for plastic processing from natural resources. The over‐ripe or even waste banana can be adequately prepared for batch films processed with reasonable mechanical and barrier properties, suitable for applications in the food segment. The addition of small fractions of chitosan nanoparticles, form nanocomposites enhancing mechanical and thermal stability broadening potential film applications.

This work investigated changes in the chemical composition and structure of soybean straw (SS) treated with alkali (NaOH 5% and 17.5%) and bleached with hydrogen peroxide (H2O2) or sodium hypochlorite (NaOCl). Removal of the amorphous constituents increased the degree of crystallinity and the content of cellulose fibers particularly after reaction with high concentrations of alkali. Treatment with NaOH 17.5% contributed to the allomorph transition from cellulose I to II regardless of the bleaching agent, but H2O2 as bleaching agent promoted more effective delignification. This work also evaluated the potential use of treated and non-treated SS as reinforcement filler in soy protein isolate film (SPI). Films added with treated SS presented higher mechanical resistance, lower elongation at break, and lower solubility in water. Addition of non-treated SS did not affect the properties of the SPI film significantly. The low solubility and the reasonable water vapor permeability of the composite films make them suitable packaging materials for fresh fruit and vegetables.

This study used commercial enzymes to isolate cellulose nanofibrils (CN) and produce sugars from chemically pretreated soybean straw (SS) (stem, leaves, and pods) by alkali (NaOH 5 or 17.5% v/v at 90°C for 1 h or at 30°C for 15 h) and bleaching (NaClO₂3.3% or H₂O₂4%) pretreatments. Depending on the pretreatment applied to the soybean straw, the yield of CN varied from 6.3 to 7.5 g of CN/100 g of SS regardless of the concentration of the alkaline solution (5 or 17.5%). The CN had diameter of 15 nm, measured over 300 nm in length, and had high electrical stability (zeta potentials ranged from −20.8 to −24.5). Given the XRD patterns, the crystallinity index (CrI) of CN ranged from 45 to 68%, depending on the chemical pretreatment the starting material was submitted to. CN obtained from SS treated with NaOH 17.5% and H₂O₂(CrI = 45%) displayed better thermal stability probably because a lignin-cellulose complex emerged. The soluble fraction obtained in the first step of CN production contained a large amount of reducing sugars (11.2 to 30.4 g/100 g of SS). SS seems to be a new promising industrial source to produce CN via enzymatic-mechanical treatment, leading to large amounts of reducing sugars for use in bioenergy production.