Microarc oxidation (MAO) is performed on ZK60 magnesium alloy at 250-400 V. For this paper, a direct current (dc), unipolar (UP), and bipolar (BP) power modes are used to produce a dense and uniform oxide coating that increases the corrosion resistance of ZK60 alloy. The compositions and microstructures of the oxide coatings that are formed using different working parameters are determined by X-ray diffraction and scanning electron microscopy. The corrosion resistance of the coatings is evaluated in a 3.5 wt% NaCl solution using potentiodynamic polarization tests. The average roughness is then measured. The results show that the mode of the applied power (dc, UP, and BP modes) has a significant effect on the coating's morphology and corrosion resistance. For the same pulsed-power supply, the number of pores in the coating decreases as the applied voltage is increased and the average pore size increases so cracks gradually appear. The ZK60 magnesium alloy that is prepared at 400 V using BP power has the least porosity and the best corrosion resistance.
23 November 2016 in IEEE Transactions on Plasma Science
This paper attempts to utilize the two-stage method of microarc oxidation (MAO) and then the cathodic reduction method to prepare silver element contained in titanium oxide coating. The effects of MAO voltages, reduction voltages, and time on the surface morphology, silver content, and antibacterial and bioactivity properties of the coatings are investigated. The results show that the quantity of bacteria lessened around titanium oxide coating with silver contained. Furthermore, the higher the silver content is, the lesser the number of bacteria around.
23 November 2016 in IEEE Transactions on Plasma Science
This paper attempts to utilize microarc oxidation (MAO) to fabricate the aluminum nitride/aluminum oxide composite ceramic coating on aluminum alloy surface. The effects of MAO voltages, different nitrogen sources, concentration on the surface morphology, and nitrogen content of the coatings are investigated. The results show that the highest nitrogen content (21.22 at%) is obtained on the surface of the coating by the energy dispersive spectrometer analysis under the condition of MAO voltage of 575 V, urea 22.50 g/L, and ammonium hydroxide 20 mL/L condition.
This study successfully provides the empirical practicability of a hybrid mechanism for helicopters. A turbine engine and a set of electricity power systems can operate simultaneously and/or independently as a symmetric structure. The latter power source works as an immediate supplementary device if the former one has malfunction. We look forward to promoting this experimental evidence in the helicopter industry. The ultimate purpose of this manuscript is to decrease the incidents of crashes and save people’s lives.