Weeds are one of the most important factors affecting agricultural production. The waste and pollution of farmland ecological environment caused by full-coverage chemical herbicide spraying are becoming increasingly evident. With the continuous improvement in the agricultural production level, accurately distinguishing crops from weeds and achieving precise spraying only for weeds are important. However, precise spraying depends on accurately identifying and locating weeds and crops. In recent years, some scholars have used various computer vision methods to achieve this purpose. This review elaborates the two aspects of using traditional image-processing methods and deep learning-based methods to solve weed detection problems. It provides an overview of various methods for weed detection in recent years, analyzes the advantages and disadvantages of existing methods, and introduces several related plant leaves, weed datasets, and weeding machinery. Lastly, the problems and difficulties of the existing weed detection methods are analyzed, and the development trend of future research is prospected.

Detection of weeds and crops is the key step for precision spraying using the spraying herbicide robot and precise fertilization for the agriculture machine in the field. On the basis of k-mean clustering image segmentation using color information and connected region analysis, a method combining multi feature fusion and support vector machine (SVM) was proposed to identify and detect the position of corn seedlings and weeds, to reduce the harm of weeds on corn growth, and to achieve accurate fertilization, thereby realizing precise weeding or fertilizing. First, the image dataset for weed and corn seedling classification in the corn seedling stage was established. Second, many different features of corn seedlings and weeds were extracted, and dimensionality was reduced by principal component analysis, including the histogram of oriented gradient feature, rotation invariant local binary pattern (LBP) feature, Hu invariant moment feature, Gabor feature, gray level co-occurrence matrix, and gray level-gradient co-occurrence matrix. Then, the classifier training based on SVM was conducted to obtain the recognition model for corn seedlings and weeds. The comprehensive recognition performance of single feature or different fusion strategies for six features is compared and analyzed, and the optimal feature fusion strategy is obtained. Finally, by utilizing the actual corn seedling field images, the proposed weed and corn seedling detection method effect was tested. LAB color space and K-means clustering were used to achieve image segmentation. Connected component analysis was adopted to remove small objects. The previously trained recognition model was utilized to identify and label each connected region to identify and detect weeds and corn seedlings. The experimental results showed that the fusion feature combination of rotation invariant LBP feature and gray level-gradient co-occurrence matrix based on SVM classifier obtained the highest classification accuracy and accurately detected all kinds of weeds and corn seedlings. It provided information on weed and crop positions to the spraying herbicide robot for accurate spraying or to the precise fertilization machine for accurate fertilizing.

In order to improve the efficiency and quality of transplanting vegetables in dry land, based on the seedling technology, transplanting effect and analysis of the planting process, a potted vegetable seedlings transplanting machine was designed. It mainly comprised rotary disc type feeding mechanism, five-bar duckbill type planting mechanism (simulated duckbill mechanism, disc cam, connecting rod, crank, fork, cable) and power transmission system. Based on the physical parameters of the seedlings and design requirements, it was determined that the diameter of the duckbill was D=90 mm, the opening and closing angle was 25°, and the taper angle was 17°. A test bench with adjustable parameters was built by analyzing the structure of the planting mechanism and the motion of the working process. The digital speckle technique was used to optimize the parameters, so that the length of the crankshaft Ι was S1=100 mm, the length of the crankshaft ΙΙ was S2= 80 mm, the length of the connecting rod Ι was S3=140 mm, the length of the connecting rod ΙΙ was S4=260 mm, the length of rod to connecting the rack was S6=314 mm, and the height of planting track was H=450 mm. According to the above parameters and the control requirements of the duckbill mechanism, the cam stroke was determined to be S=15 mm. And the initial phase difference between the two cams was 180°. The experiment was carried out with pepper seedlings as transplanting objects. The results showed that when the planting frequency was 50-70 plants/min, the seedling upright rate was 93%-91.1%, the planting depth qualified rate was 96%-92%. The leakage rate was 0-0.26%, the variation coefficient of plant spacing was 0.37%-0.67%, the injury rate was 0%, and the mechanical damage degree of the mining surface was 2.43-3.77 mm/m2. The machine can effectively improve the quality of transplanting, which can meet the production needs and design requirements of the mechanism. Keywords: seedling transplanting, planting mechanism, digital speckle, parameter optimization, test analysis DOI: 10.25165/j.ijabe.20201301.5494 Citation: Jin X, Cheng Q, Zhao B, Ji J T, Li M Y. Design and test of 2ZYM-2 potted vegetable seedlings transplanting machine. Int J Agric & Biol Eng, 2020; 13(1): 101–110.

In response to the need for precision and intelligence in the assessment of transplanting machine operation quality, this study addresses challenges such as low accuracy and efficiency associated with manual observation and random field sampling for the evaluation of rice seedling planting conditions. Therefore, in order to build a seedling insertion condition detection system, this study proposes an approach based on the combination of image processing and deep learning. The image processing stage is primarily applied to seedling absence detection, utilizing the centroid detection method to obtain precise coordinates of missing seedlings with an accuracy of 93.7%. In the target recognition stage, an improved YOLOv8 Nano network model is introduced, leveraging deep learning algorithms to detect qualified and misplaced seedlings. This model incorporates ASPP (atrous spatial pyramid pooling) to enhance the network’s multiscale feature extraction capabilities, integrates SimAM (Simple, Parameter-free Attention Module) to improve the model’s ability to extract detailed seedling features, and introduces AFPN (Asymptotic Feature Pyramid Network) to facilitate direct interaction between non-adjacent hierarchical levels, thereby enhancing feature fusion efficiency. Experimental results demonstrate that the enhanced YOLOv8n model achieves precision (P), recall (R), and mean average precision (mAP) of 95.5%, 92.7%, and 95.2%, respectively. Compared to the original YOLOv8n model, the enhanced model shows improvements of 3.6%, 0.9%, and 1.7% in P, R, and mAP, respectively. This research provides data support for the efficiency and quality of transplanting machine operations, contributing to the further development and application of unmanned field management in subsequent rice seedling cultivation.

The lightweight, small diameter, and irregular shape of small vegetable seeds create difficulties for online monitoring of sowing quality. We propose a machine vision-based online monitoring method with a sowing test bench designed to address the challenges. Vision devices and image processing systems are employed to detect the quality of seed sowing. Firstly, the seed segmentation image is obtained by completing the steps of median filtering, graying and image segmentation.We then implement the Circumscribed circle method to detect the position of the seed. Afterward, the coordinate system is converted using calibrated results to eliminate non-seed impurities. Finally, we count the number of identified seeds to evaluate the recognition accuracy. The trial compared three algorithms: the image segmentation algorithm OTSU, the critical point localization algorithm SIFT, and the algorithm designed in the experiment. The algorithm we designed outperformed the others regarding recognition accuracy and processing time. The experimental method employed in the study encompasses various functionalities, including seeding counting, understanding detection, replaying, and monitoring deviations from seed bands during sowing. Cabbage seeds (1.50mm-2.00mm), tomato seeds (1.00mm-1.50mm), and radish seeds (0.50mm-1.00mm) were selected as the experimental subjects due to the uniform particle size distribution. The results demonstrate that the relative error between the online image recognition algorithm and the system’s seeding rate monitoring is below 3.0%. Moreover, the accuracy of missed seeding monitoring is 92.5%, while the accuracy of deviation monitoring during seeding is 92.0%. We observed that the image recognition algorithm employed in the system achieved a processing time of 0.29 seconds, with a seed band recognition rate of 96.8%, fulfilling the monitoring requirements for small seed sowing experiments. The processed images and collected data are presented in real-time on the upper computer terminal. This study significantly contributes to the advancement of small-grain vegetable seed sowing monitoring technology.

Accurate yield estimation before the wheat harvest is very important for precision management, maintaining grain market stability, and ensuring national food security. In this study, to further improve the accuracy of winter wheat yield estimation, machine learning models, including GPR, SVR, and DT, were employed to construct yield estimation models based on the single and multiple growth periods, incorporating the color and multispectral vegetation indexes. The results showed the following: (1) Overall, the performance and accuracy of the yield estimation models based on machine learning were ranked as follows: GPR, SVR, DT. (2) The combination of color indexes and multispectral vegetation indexes effectively improved the yield estimation accuracy of winter wheat compared with the multispectral vegetation indexes and color indexes alone. The accuracy of the yield estimation models based on the multiple growth periods was also higher than that of the single growth period models. The model with multiple growth periods and multiple characteristics had the highest accuracy, with an R² of 0.83, an RMSE of 297.70 kg/hm², and an rRMSE of 4.69%. (3) For the single growth period, the accuracy of the yield estimation models based on the color indexes was lower than that of the yield estimation models based on the multispectral vegetation indexes. For the multiple growth periods, the accuracy of the models constructed by the two types of indexes was very close, with R² of 0.80 and 0.80, RMSE of 330.37 kg/hm² and 328.95 kg/hm², and rRMSE of 5.21% and 5.19%, respectively. This indicates that the low-cost RGB camera has good potential for crop yield estimation. Multi-temporal and multi-sensor remote sensing data fusion can further improve the accuracy of winter wheat yield estimation and provide methods and references for winter wheat yield estimation.