Natural bamboo is rapidly replacing wood, but it is highly hygroscopic and has poor dimensional stability. Herein, Moso bamboo was subjected to hygrothermal treatment at different temperatures. The hydrophobicity and dimensional stability of bamboo increased, as indicated by the 16.5% decrease in volumetric swelling and three-fold increase in the contact angle at 220 °C. The fibers and parenchyma cells delaminated, and pores appeared after treatment at 200 °C. These changes were attributed to the significant degradation of hemicelluloses. The acetyl groups of hemicelluloses decomposed into acetic acid. The apparent crystallinity of cellulose increased mainly due to the reduced hemicellulose content. Furthermore, a breakage of xylan and β-O-4 bonds was observed, and S units were condensed after treatment at 220 °C. In addition, the syringyl/guaiacyl ratio showed more than a five-fold increase, while associated ferulic acid decreased after hygrothermal treatment, indicating that the dense structure of the cell walls was broken. These data were used to propose a mechanism for changes in the bamboo cell walls during hygrothermal treatment. This simple and environmentally-friendly approach holds great potential for use in high-humidity environments.
Hygrothermal treatment is an environmentally friendly and efficient modification method. In this study, Moso bamboo was modified with hygrothermal treatments, and the results of nitrogen adsorption, X-ray diffraction (XRD), scanning electron microscopy (SEM) and nano indentation (NI) were then examined. Interestingly, the samples that underwent hygrothermal treatment at 180 °C and 100% RH (relative humidity) had the highest crystallinity (36.92%), which was 11.07% statistically larger than that of the control samples. Simultaneously, the total pore volume and average pore diameter (2.72 nm) dramatically decreased by 38.2% and 43.7%, respectively. The NI elasticity and hardness of the samples also reached the highest values under this condition; both increased by nearly 21% as compared with the control samples. Therefore, 180 °C is a favorable hygrothermal treatment temperature for Moso bamboo modification due to the porosity changes and the improvement of the nanomechanics of the cell walls.
Bamboo and wood fibers are important raw materials for pulp and papermaking, as well as fiber-reinforced composites. The mechanical properties of single fibers and the cell walls of moso bamboo (Phyllostachys heterocycla), Masson pine (Pinus massoniana), and Chinese fir (Cunninghamia lanceolata) were tested via single fiber tensile test and nanoindentation; their fracture characteristics were also compared. The single fibers and cell walls of moso bamboo had superior mechanical properties compared with those of Masson pine and Chinese fir. The bamboo fibers exhibited high strength, high elasticity, and superior ductility. The results indicated that the differences between the mechanical properties of the fiber cells and cell walls of moso bamboo and those of wood were largely dependent upon cell shape and structure.