Pinecones, a common biomass waste, has an interesting composition in terms of cellulose and lignine content that makes them excellent precursors in various activated carbon production processes. The synthesized, nanostructured, activated carbon materials show textural properties, a high specific surface area, and a large volume of micropores, which are all features that make them suitable for various applications ranging from the purification of water to energy storage. Amongst them, a very interesting application is hydrogen storage. For this purpose, activated carbon from pinecones were prepared using chemical activation with different KOH/precursor ratios, and their hydrogen adsorption capacity was evaluated at liquid nitrogen temperatures (77 K) at pressures of up to 80 bar using a Sievert’s type volumetric apparatus. Regarding the comprehensive characterization of the samples’ textural properties, the measurement of the surface area was carried out using the Brunauer–Emmett–Teller method, the chemical composition was investigated using wavelength-dispersive spectrometry, and the topography and long-range order was estimated using scanning electron microscopy and X-ray diffraction, respectively. The hydrogen adsorption properties of the activated carbon samples were measured and then fitted using the Langmuir/ Töth isotherm model to estimate the adsorption capacity at higher pressures. The results showed that chemical activation induced the formation of an optimal pore size distribution for hydrogen adsorption centered at about 0.5 nm and the proportion of micropore volume was higher than 50%, which resulted in an adsorption capacity of 5.5 wt% at 77 K and 80 bar; this was an increase of as much as 150% relative to the one predicted by the Chahine rule.
4 March 2024 in International Journal of Hydrogen Energy
In spite of the widespread range of hydrogen applications as one of the greenest energy vectors, its transportation and storage still remain among the main concerns to be solved in order to definitively kickstart a rapid takeoff of a sustainable H2 economy. The quest for a simple, efficient, and highly reversible release storage technique is a very compelling target. Many studies have been undertaken to increase H2 storage efficiency by exploiting either chemisorption or physisorption processes, or through entrapment on different porous solid materials as sorbent systems. Among these, biomass-derived carbons represent a category of robust, efficient, and low-cost materials. One question that is still open-ended concerns the correlation of H2 uptake with the kind and number of heteroatoms as dopant of the carbonaceous sorbent matrix, such as boron, aiming to increase whenever possible bonding interactions with H2. Furthermore, the preferred choice is a function of the type of hydrogen use, which may involve a short- or long-term storage option. In this article, after a brief overview of the main hydrogen storage methods currently in use, all the currently available techniques for the boronation of activated carbonaceous matrices derived from recycled biomass or agricultural waste are discussed, highlighting the advantages and drawbacks of each of them.